Hewlett Packard HP PSC 1510xi All-in-One Download Drivers und Utilities

Web installers for Mac OS 9.x and Mac OS X 10.1.x


Operating system(s): Mac OS 9, Mac OS X
Download file size: 94.96M

This download includes the HP driver, HP Printer Utility, and HP Photosmart Studio imaging software (optional install) for Macintosh OS X v10.3 and v10.4.

Enhancements

makes use of a PackageMaker based installation user experience.

Operating system(s): Mac OS X
Download file size: 166.34M
System Requirements

Mac OS X v10.3, v10.4 (Universal)


Installation Instructions

1. Download file to a directory on your hard drive.
2. Double-click the file and follow the on-screen instructions.

This download includes the HP driver, HP Printer Utility, and HP Photosmart Studio imaging software (optional install) for Macintosh OS X v10.3 and v10.4.

Enhancements

makes use of a PackageMaker based installation user experience.

Operating system(s): Mac OS X
Download file size: 166.13M
System Requirements

Mac OS X v10.3, v10.4 (Universal)


Installation Instructions

1. Download file to a directory on your hard drive.
2. Double-click the file and follow the on-screen instructions.

HP PSC 1500 Series All-in-One software for Mac OS X v10.2.8


Operating system(s): Mac OS X
Download file size: 91.33M

HP All-in-One printing-only software for Mac OS X v10.2.8, v10.3 and v10.4


Operating system(s): Mac OS X
Download file size: 14.25M

HP Image Zone software for Mac OS X v 10.2.8 and later


Operating system(s): Mac OS X
Download file size: 16.55M

This download includes the HP Photosmart driver, HP Printer Utility, and HP Photosmart Studio imaging software for Mac OS X v10.3.9, v10.4 and v10.5.

Fixes

Original Software/Drivers


Operating system(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.3, Mac OS X 10.4
Download file size: 168.5M
System Requirements

No additional prerequisites


Installation Instructions

Note: For Network Connections, please refer to the Setup Poster which shipped with your HP All-in-One for network setup and software installation instructions.

1. Click the Download Only button.
2. When a new pop-up window appears, click on the Save button.
3. Save the file in a desired location.

Note: Make sure the printer is not connected to the computer before running the file.

4. At the end of saving the file, go to the directory where the file was saved and execute it.

Note: File is compressed and may take time to expand and run.

5. Follow any on-screen instructions.

With this fast, download, HP Photosmart Essential gives you easy and fun ways to enhance your photo creativity. Easy-to-use editing features and a wide range of printing options enable you to get great-looking prints in a snap.


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 6.19M

The Basic Feature drivers are intended for home users who want a basic print and scan driver to use with their HP All-in-One device.
This software installation can be used on PCs that do not meet the minimum system requirements necessary to install the HP Full/Express Feature software/drivers.
This installation does not support network (Ethernet or wireless) installations.
Software Installation instructions:
Click the Download now button.
Choose Open to start the download and run the software installer.
Follow the on-screen instructions to start the installation process.
Connect the USB cable between your HP All-in-One device and your PC when directed by on-screen instructions, then turn on your HP All-in-One device.
Wait for additional on-screen installation instructions before using your HP All-in-One device.



Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 48.4M

.

Fixes and improves performance of support tool diagnostics.


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 273.67k

This update provides a more complete list of countries and regions when using HP Instant Share.


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 73.67k

This update synchronizes the Help system to match the HP print drivers for improved customer usability.


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 1.6M

Updates the system to correct the file format issue with HP Instant Share.


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 733.71k

This download includes both software and drivers. If you would like just print and scan drivers, please download the HP Basic Feature Drivers (for home users). This installation does not support networked (Ethernet or wireless) installations.
During the installation process, you will be prompted to choose either Full or Express install.
Full install is the complete software solution with advanced digital photography features. This option may not be available for some operating systems.
Express install has basic digital photography features and will occupy less disk space on your hard drive.
Software Installation instructions:
Click the Download now button.
Choose Open to start the download and run the software installer.
Follow the on-screen instructions to start the installation process.
Connect the USB cable between your HP All-in-One device and your PC when directed by on-screen instructions, then turn on your HP All-in-One device.
Wait for additional on-screen installation instructions before using your HP All-in-One device.



Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 309.96M

.

Improves reliability of internal device diagnostics.


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP
Download file size: 281.66k

Fixes


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows XP x64
Download file size: 417.89k

The HP Printing Diagnostic Utility is created to diagnose and fix many common issues preventing printing from the computer.

Fixes

The HP Printing Diagnostic Utility is created to diagnose and fix many common issues preventing printing from the computer. It works for many HP printing devices. Follow the on-screen instructions to run the utility. Examples of issues this utility will address: ? Connection Issue: The utility will check that the selected printer is connected and powered. ? Spooler Service Issue: The utility will check that the print spooler service is running and restart the service, if necessary. ? Purge Spooler Issue: The utility will check if the print queue is empty and will clear it, if necessary. ? Printer Status Issue: The utility will check if the print status is offline or paused and will change the status to online or resume, if necessary. ? Device Manager Issue: The utility will check for cautioned entries in the device manager. In order to fix the issue, the utility will force a plu and play re-scan of the device manager. ? Printer Port Issue: The utility will check whether the selected printer is configured to use a DOT4 port or the USB00X Port and assign the correct printer port, if necessary. ? Driver Handler Issue: The utility will check whether the correct printer driver is installed for the selected printer and assign the correct printer driver, if necessary. If the issue continues, turn your printer on and off, disconnect and reconnect the printer cable from the computer and the printer, and restart the computer. After the computer has restarted, please cancel any pending print jobs, if prompted.


Operating system(s): Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows Vista
Download file size: 625.67k
System Requirements

This utility will only support USB connected printers.

.





Installation Instructions

1. Click the Download only button. 2. Click the Run button to begin the download. 3. Follow the on-screen instructions to begin the installation process. 4. Click Finish. 5. Click This program installed correctly. 6. To run the utility, click Start (or hit Ctrl+Esc or hit Windows key on your keyboard), All Programs, HP, HP Print Diagnostic Utility. 7. Follow the on-screen instructions. 8. If the issue continues, turn your printer on and off, disconnect and reconnect the printer cable from the computer and the printer, and restart the computer. 9. After the computer has restarted, please cancel any pending print jobs, if prompted.

With this fast, download, HP Photosmart Essential gives you easy and fun ways to enhance your photo creativity. Easy-to-use editing features and a wide range of printing options enable you to get great-looking prints in a snap! In addition, the online options let you share your pictures and order prints and personalized photo items.


Operating system(s): Microsoft Windows 98, Microsoft Windows ME, Microsoft Windows 98SE
Download file size: 5.39M

HP Scan Diagnostic Utility is created to diagnose and fix scan related issues with HP All-in-One devices. Some symptoms the utility will attempt to fix are: 1) Scanner communication error displayed on your monitor. 2) No scan options error displayed on the HP device control panel or scanning from the device results in device not to respond. Follow the on-screen instructions to run the utility. In case the utility does not fix the issue, please perform one or all of the following: ? Make sure that the correct device is selected in the HP Solution Center or HP Director. ? Turn off the printer, and then turn it on again. If the issue continues, reboot the PC. ? Uninstall and reinstall the HP Software. Please refer to the HP Support website for more detailed troubleshooting if none of the above resolves the issue.


Operating system(s): Microsoft Windows 2000, Microsoft Windows ME, Microsoft Windows XP, Microsoft Windows 98SE
Download file size: 130.88k

Improves image quality (sharpness) when scanning in maximum pixel depth mode from HP Solution Center.


Operating system(s): Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows ME, Microsoft Windows XP
Download file size: 501.79k

This patch will resolve "Unexpected Internal Errors" and some "Communications Failure" errors that may occur when there are mutiple versions of HP Image Zone and/or Photo and Imaging software on your system.

Fixes

The patch should resolve most cases of Unexpected Internal Error and/or Communications failures installed over newer scanner software.


Operating system(s): Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows ME, Microsoft Windows XP
Download file size: 441.79k

.





Installation Instructions

The patch will download and expand into your a folder called c:\col10862 and automatically execute. Execution should take place within a few seconds. Once the patch has executed, it will display a message box requesting you retry the scan.
Once the patch has been executed, you may delete the C:\COL10862 with the COL10862.exe file.

This download includes the HP Full Feature Software and Drivers.

The Full Feature Software solution supplies full access to the many features of the All-in-One device and is intended for Users who want more than just a basic print and scan driver.

Enhancements

Original Software/Drivers

Operating system(s): Microsoft Windows Vista, Microsoft Windows Vista Business (64-bit), Microsoft Windows Vista Ultimate (32-bit), Microsoft Windows Vista Starter, Microsoft Windows Vista Ultimate (64-bit), Microsoft Windows Vista (64-bit), Microsoft Windows Vista Enterprise (32-bit), Microsoft Windows Vista Home Premium (64-bit), Microsoft Windows Vista Home Basic (64-bit), Microsoft Windows Vista Business (32-bit), Microsoft Windows Vista Enterprise (64-bit), Microsoft Windows Vista Home Basic (32-bit), Microsoft Windows Vista Home Premium (32-bit)
Download file size: 163.07M
System Requirements

No additional prerequisites

.





Installation Instructions

Click the Download only button.
Note: Make sure the HP All-in-One device is "Not" connected to the computer before running the download file.
Click the Run button to begin the download.
Note: File is compressed and may take time to expand and run.
Follow the on-screen instructions to begin the installation process.
Click Finish.
Connect the USB cable between the HP All-in-One device and the computer, then turn on the HP All-in-One device.
Your product should be ready to print.

Corrects an issue when using HP Image Zone to back up files to CD-R or CD-RW.


Operating system(s): Microsoft Windows XP
Download file size: 949.71k

Prevents the Cannot Find error after clicking next on the Sign up now Product Registration page.


Operating system(s): Microsoft Windows XP
Download file size: 4.18M

Beta driver providing basic print and scan functionality.


Operating system(s): Microsoft Windows XP x64
Download file size: 58.43M


Installation Instructions

Follow the installation instructions below for your printer connection, USB or Networked (Wired and Wireless).

Installation Instructions: USB Connection
1. Download the x64Drv5.64.0.17.exe file.
2. Once downloaded, choose Open or just run the x64Drv5.64.0.17.exe.
3. Follow onscreen instructions listed below.
Note: There may be a long pause between each of the steps below.
4. Choose Direct Connect.
5. Power on the printer, and connect it to the computer when prompted.
6. The "Found New Hardware Wizard" will be displayed.
7. Select No, not this time.
8. Select Install the software automatically (Recommended).
9. Depending on your product, you might see one or more Windows' warning screens.
10. Click Continue anyway or Yes each time these Windows warning screens appear.
11. Click Finish.
12. Reboot your computer (Highly Recommended).

Uninstall Instructions: USB Connection
1. Click Start.
2. Click Control Panel.
3. Double Click Add or Remove Programs.
4. Select Beta Printer Drivers for Windows XP x64 (5.64.0.17).
5. Click Remove.
6. Reboot your computer (Highly Recommended).

Installation Instructions: Network (Wired and Wireless)

Checklist for Wired Network Setup:
1. Turn the printer on.
2. Ensure the printer is connected to the network.

Checklist for Wireless Network Setup:
1. Turn the printer on.
2. Ensure the "Wireless" is turned on for the printer. (Typically signified by Blue Light on printer.)
3. Write down the wireless setting for your network. They are stored in the access point (the box with antennas).
4. To get to the access point:
a. Press the Windows key and the R key. Type CMD and press ENTER.
b. Type IPCONFIG and press ENTER.
c. Write down the IP address that appears in the line that says "Default Gateway". Example "192.162.0.1"
d. Press the Windows key and the R key. Type http:// and press ENTER . Example http://192.168.0.1. That will take you to the access point web server. Check your access point manual for more instructions.
e. You need to find the following settings.
i. SSID or Network name
ii. Encryption (None or disabled, WEP or WPA)
iii. Key or paraphrase

f. If you cannot find these settings, contact the manufacturer of your access point for help.
5. If your printer has an LCD display, press Setup, go to the network menu and select the wireless configuration option (usually called Wireless Setup Wizard) and follow instructions.

Note: If the printer cannot connect to your wireless network:
1. Ensure MAC address control/filter includes new printer's MAC addresses OR MAC address control/filter is turned "Off".
2. Ensure SID broadcasting is temporary enabled for easier setup.
3. Follow your setup instructions that came with your printer for more information on configuring your wireless printer.

Installation instructions: Wired and Wireless Network
1. Download the x64Drv5.64.0.17.exe file.
2. Once downloaded, choose Open or just Run the x64Drv5.64.0.17.exe.
3. Follow onscreen instructions listed below:
Note: There may be a long pause between each of the steps below.
4. Choose Network.
5. Choose your printer after the installer has identified it on the network.
6. The "Found New Hardware Wizard" will be displayed.
7. Select No, not this time.
8. Select Install the software automatically (Recommended).
9. Depending on your product, you might see one or more Windows' warning screens.
10. Click Continue anyway or Yes each time these Windows warning screens appear.
11. Click Finish.
12. Reboot your computer (Highly Recommended).

Uninstall Instructions: Wired and Wireless Network
1. Click Start.
2. Click Control Panel.
3. Double Click Add or Remove Programs.
4. Select Beta Printer Drivers for Windows XP x64 (5.64.0.17).
5. Click Remove.
6. Reboot your computer (Highly Recommended).

The HP Printing Diagnostic Utility is created to diagnose and fix many common issues preventing printing from the computer.

Fixes

The HP Printing Diagnostic Utility is created to diagnose and fix many common issues preventing printing from the computer. It works for many HP printing devices. Follow the on-screen instructions to run the utility. Examples of issues this utility will address: ? Connection Issue: The utility will check that the selected printer is connected and powered. ? Spooler Service Issue: The utility will check that the print spooler service is running and restart the service, if necessary. ? Purge Spooler Issue: The utility will check if the print queue is empty and will clear it, if necessary. ? Printer Status Issue: The utility will check if the print status is offline or paused and will change the status to online or resume, if necessary. ? Device Manager Issue: The utility will check for cautioned entries in the device manager. In order to fix the issue, the utility will force a plu and play re-scan of the device manager. ? Printer Port Issue: The utility will check whether the selected printer is configured to use a DOT4 port or the USB00X Port and assign the correct printer port, if necessary. ? Driver Handler Issue: The utility will check whether the correct printer driver is installed for the selected printer and assign the correct printer driver, if necessary. If the issue continues, turn your printer on and off, disconnect and reconnect the printer cable from the computer and the printer, and restart the computer. After the computer has restarted, please cancel any pending print jobs, if prompted.


Operating system(s): Microsoft Windows Vista (64-bit), Microsoft Windows XP x64
Download file size: 677.96k
System Requirements

This utility will only support USB connected printers.


Installation Instructions

1. Click the Download only button. 2. Click the Run button to begin the download. 3. Follow the on-screen instructions to begin the installation process. 4. Click Finish. 5. Click This program installed correctly. 6. To run the utility, click Start (or hit Ctrl+Esc or hit Windows key on your keyboard), All Programs, HP, HP Print Diagnostic Utility. 7. Follow the on-screen instructions. 8. If the issue continues, turn your printer on and off, disconnect and reconnect the printer cable from the computer and the printer, and restart the computer. 9. After the computer has restarted, please cancel any pending print jobs, if prompted.