Clevo M5x0V Download Drivers und Manual

This document contains the following sections:

1. Overview
2. System Requirements
3. Contents of the Distribution Package
4. List of Available Command Line Flag Options
5. Contents of the Extracted Files
6. Installing the Software in Interactive Mode
7. Installing the Software in Silent Mode
8. Installing the INF Files Prior to OS Installation
8A. Installing the Windows* 2000 INF Files Prior
to OS Installation
8B. Installing the Windows* 98/Windows 98 SE/Windows* Me
INF Files Prior to OS Installation
8C. Installing the Windows* 95 INF Files Prior to OS
Installation
9. Installing the INF Files After OS Installation
9A. Installing the Windows* 2000 INF Files after
OS Installation
9B. Installing the Windows* 98/Windows* 98 SE/
Windows* Me/Windows* 95 INF Files after OS
Installation
10. Verifying Installation of the Software
11. Identifying the Software Version Number
12. Troubleshooting

How to use this RTLSetup Utility
---------------------------------
For Windows ME:

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.

2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation/upgrade.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.

For Windows 2000/XP:

1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.

2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

3. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately if you want your networking to be re-installed.

To print README.TXT, open it in Windows Write, Microsoft Word,
or another word processor. Then select the entire document
and format the text in 10-point Courier before printing.

This file (README.TXT) contains:

--------
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

ENE CB1410 Cardbus Controller
Software Driver Support Package
V1.00 2002-03-07

This readme.txt shows the procedure to update INF file of the ENE
CB1410 Cardbus Controller for Microsoft Windows XP/2000/ME/98SE.
--------------
For Windows XP
--------------
1. Select "Start" menu.

2. Select "Control Panel"

3. Double click "System" icon.

4. Click the "Hardware" tab in the "System Properties" window.

5. Click the "Device Manager" button.
----------------
For Windows 2000
----------------
1. Double click "My Computer" icon on the desktop.

2. Double click "Control Panel" icon.

3. Double click "System" icon.

4. Click the "Hardware" tab in the "System Properties" window.

5. Click the "Device Manager" button.

--------------
For Windows Me
--------------
1. Double click "My Computer" icon on the desktop.

2. Double click "Control Panel" icon.

3. Double click "System" icon. If you can not see the "System" icon,
please click "view all Control Panel options".

4. Click the "Device Manager" tab in the "System Properties" window.

5. Double click the "PCMCIA socket" selection.

----------------
For Windows 98SE
----------------
1. Double click "My Computer" icon on the desktop.

2. Double click "Control Panel" icon.

3. Double click "System" icon.

4. Click the "Device Manager" tab in the "System Properties" window.

5. Double click the "PCMCIA socket" selection.

Realtek Semiconductor Corp. AC'97 Sound System Software ver:A3.43
Installation and Setup

Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:
=================================================================================

<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver/Application:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek AC'97 Drivers and Applications" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

<<< For WinNT 4.0 (NT4 driver) >>>

SiS AGP Driver ReadMe.Txt
for
Win2000/XP/ME/98

The SiS AGP driver is installed for AGP bus used by VGA Card.It offer efficient
functions for VGA driver.With installation of AGP driver,it provide high
performance and good compatibility for different hardware.
This package include four parts.
1. WinXP/Win2000 AGP filter driver: Which can support AGP 8x chipset if chipset and VGA card support.
2. WinME/Win98 AGP miniport driver:Which can support AGP 8x chipset if chipset and VGA card support.
3. Some Windows patches:
SIS_LIB.DLL,SISPORT.SYS (winxp) : they are used for reading PCI port.
SiSUSBrg.exe (winxp): Add registry for USB bug under WinXP
Mp_s3.exe (WinME):Patch old SiS 961 FERR bug
Openhci.sys (Win98):Provided by Microsoft to update Win98 USB OHCI
4. Execute ata133.exe for IDE to let IDE support UDMA 133 (XP) and 48bit Capacity of
HD.It also set IDE device to run UDMA as possible.
5. SisAGP utility setting AGP transfer rate only used in SIS AGP new driver.


CONTENTS
***********************
1) System Requirements
2) Windows 2000/Windows XP/Windows 98/Windows ME Driver
3) Package Version Identify
4) Silent Install Driver
5) Verifying Installation of the Driver

Alps Pointing-device Driver provides a convenient way to modify
setting for Alps Pointing-device. The Alps Pointing-device Driver
is compatible with most standard mice and similar pointing devices.
____________________________________________________________

CONTENTS:

1. Driver Installation for Windows 2000/XP
2. Using the Alps Pointing-device Property Sheets
3. Files On the Setup Disk
____________________________________________________________

1. Driver Installation for Windows 2000/XP

Use this procedure if you use Windows 2000/XP:
1) From the Start menu, select Settings, Control Panel.
2) Double-click Mouse to open Mouse Properties.
3) Select the Hardware tab, and then click Properties.
4) Select the Driver tab, and then click Change.
5) Click Next.
6) Select Display a list of the known drivers for this
device so that I can choose a specific driver, and
then click Next.
7) Click Have Disk.
8) Click Browse.
9) Choose specific directory name that you have copied
driver files.
10) Click Apfiltr.inf, and then click Open.
11) Click OK.
12) Click Alps Pointing-device, and then click Next.
13) Click Next to copy the driver files to your system.
14) Click Finish.
15) Click Close.
16) Click Yes, then restart PC automatically.

English, French, German, Italian and Spanish