Clevo M74xTUN Download Drivers und Manual

This document contains the following sections:

1. System Requirements
3. Installing the Software
4. Verifying Installation of the Software
5. Identifying the Software Version Number
6. Uninstalling the Software
7. Installation Switches Available

SYSTEM REQUIREMENTS
*******************

1. The system must contain one of the following Intel
Chipsets:

Intel(R) Poulsbo Chipset

2. The software should be installed on systems with at
least 512 MB of system memory.

3. There should be sufficient hard disk space in the
<TEMP> directory on the system in order to install
this software.

The drivers included with this distribution package are
designed to function with all releases of Microsoft
Windows* Vista.

INSTALLING THE SOFTWARE
*******************

General Installation Notes:

1. The operating system must be installed prior to the
installation of the driver.
2. This installation procedure is specific only to the
version of driver and installation file included in
this release.
3. This procedure assumes that all of the software
associated with this release is located in the same
directory.

Product name Confidentiality level
UTPS CONFIDENTIAL
Product version
V100R001 Total 2 pages
UTPS11.301.08.04.470 Release Notes

1. New features
No Description
None
2. Improvements to previous
Version Features(New/Modify)
UTPS
11.301.08.04.470
Customize the APN
Customize the usermanual
3. Known limitations and issues
No Description
None

SiS PCI Fast Ethernet Adapter Driver Setup Utility
for Windows 9X/ME/2000/XP Driver
==================================================

Note for using this Setup Utility
---------------------------------
For Windows 98/98SE/ME/2000/XP:
--------------------------------

Install the driver with "setup" or "setup -s" command:
1. setup: The Install shield will prompt you the steps to install
the driver.

2. setup -s: The Install shield will complete the installation
without prompting you any instruction.

--------------------
For Windows 95/OSR2:
--------------------

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the PCI Ethernet Controller, you should
click "Next" until "Finish" is clicked without specifying location
of the driver. You will see the "PCI Ethernet Controller" in the
Device Manager.

2. Then you can install the driver with "setup" or "setup -s" command:
a) setup: The Install shield will prompt you the steps to install
the driver.

b) setup -s: The Install shield will complete the installation
without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. After remove the driver, please restart the system immediately.

-----------------------
For Windows NT 3.5x/4.0
-----------------------
Do not use this utility in Windows NT 3.5x or 4.0.

How to use this Set8187 Utility
-------------------------------
For Windows ME:

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.

2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation/upgrade.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. You can remove Set8187 utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.

For Windows 2000/XP:

1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.

2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

3. You can remove Set8187 utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately if you want your networking to be re-installed.

Avance Logic AC'97 Sound System Software ver: A2.60
Installation and Setup
Driver & Application Installation/Removal Procedure For Avance AC'97 Codec:
=================================================================================

<<< For Win98/Win2000/WinME (WDM driver) >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Avance AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Avance AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver/Application:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Avance AC'97 Drivers and Applications" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
<<< For WinNT 4.0 (NT4 driver) >>>

Product: Intel(R) Chipset Device Software
Release: Production Version
Version: 8.8.0.1011
Target Chipset#: Intel(R) SCH Family

This document contains the following sections:

1. Overview
2. System Requirements
3. Contents of the Distribution Package
4. List of Available Command Line Flag Options
5. Contents of the Extracted Files
6. Installing the Software in Interactive Mode
7. Installing the Software in Silent Mode
8. Installing the INF Files Prior to OS Installation
8A. Installing the Windows* 2000 INF Files Prior
to OS Installation
8B. Installing the Windows* XP INF Files Prior
to OS Installation
8C. Installing the Windows Server* 2003 INF Files
Prior to OS Installation
9. Installing the INF Files After OS Installation
9A. Installing the Windows* 2000 INF Files After
OS Installation
9B. Installing the Windows* XP INF Files After
OS Installation
9C. Installing the Windows Server* 2003 INF Files
After OS Installation
10. Verifying Installation of the Software and
Identifying the Software Version Number
11. Troubleshooting

WHAT'S IN THIS FILE

- What is Protector Suite QL
- Installation
- Silent Install
- SMS Install
- Documentation
- Known Problems

___________________________________________________________________
WHAT IS PROTECTOR SUITE QL

Protector Suite QL is a desktop security and convenience product
for Windows 2000, XP and Vista. Its components provide an easy
and convenient access to your computer, web pages, and sensitive
files using a biometric device. The product is designed
to be extremely easy to install and to use.

Protector Suite QL enables
- fingerprint logon (with boot security support for strip sensor)
- fingerprint fast user switching (on Windows XP/Vista)
- accessing web pages and replaying forms using your fingerprint
- registering dialogs
- storing and accessing your sensitive files in a special "File Safe" archive using your fingerprints
- launching favorite application using your fingerprints

_____________________
INSTALLATION

Protector Suite QL installation is carried out by the Setup
wizard. It is recommended to read explaining texts in wizard
screens to avoid potential problems. The detailed description of
the installation procedure can be found in the user documentation.

Authentication hardware is installed together with the whole product.
If you use an external type of hardware, connect it after you install
the software part. You will be asked to do so after you reboot
the computer after installation and log on your computer. If any problems,
drivers and instructions can be found in tc-driver folder.

ENE MR510 / CB-712/714 Full Package Release Note
*************************************************
Version : 3.00.07
Date : 2007-07-09

OS :
Vista64, Vista, WinXP64, WinXP, Win2000, WinME, Win9X

Product :
MR510 / CB-712/714 Setup Shield
All OS : 2.00.02
CB714 Cardbus INF Update
Vista/64 : 3.00.01
WinXP/2k : 3.00.01
WinXP64 : 2.00.08
WinME/9x : 2.00.01
MR510 / CB-712/714 SecureDigital Card Reader Driver
Vista64 : 2.00.04
Vista : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00
MR510 / CB-712/714 Memory Stick Card Reader Driver
Vista64 : 2.00.03
Vista : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00
MR510 / CB-712/714 SmartMedia/XD Card Reader Driver
Vista/64 : 2.00.02
WinXP/2k : 2.00.02
WinXP64 : 1.07.00
WinME/9x : 1.01.00

WHQL Vista32/64 submission ID :
Cardbus INF : 1233857
SecureDigital : 1256082
Memory Stick : 1256073
SmartMedia/XD : 1241407

WHQL WinXP submission ID :
Cardbus INF : 1241409
SecureDigital : 1241409
Memory Stick : 1241409
SmartMedia/XD : 1241409

WHQL WinXP64 submission ID :
Cardbus INF : 1048034
SecureDigital : 1048034
Memory Stick : 1048034
SmartMedia/XD : 1048034
Product : ENE MR510 / CB-712/714 Setup Shield
*******************************************
OS:
Vista64, Vista, WinXP64, WinXP, Win2000, WinME, Win9X
===== Release note =====
Version : 2.00.04 (SD), 2.00.03 (MS)
Date : 2007-07-09
1. For Vista64 ,new DMA way to support when system memory upper 4G.
===== Release note =====
Version : 2.00.02
Date : 2007-03-01
1. Fix bug --- Fix Program Compatibility Assistant (PCA) warning dialog issue when User Account Control (UAC) is enable.

BisonC07Install-D(0909120401)-V(9.2.1.69.1)-S()-C(Clevo)-APP
Date : 2009/09/12 04:01
Versiion : 9.2.1.69.1
note : First update for 2M preview application.
=============================================================================================
BisonC07Install-D(0909232242)-V(9.2.1.69.2)-S()-C(Clevo)-APP
Date : 2009/09/23 22:42
Versiion : 9.2.1.69.2
note : Support new OEM.ini.
=============================================================================================
BisonC07Install-D(0909291946)-V(9.2.1.70.1)-S()-C(Clevo)-APP
Date : 2009/09/29 19:46
Versiion : 9.2.1.70.1
note : Update new application for 2M snap-VGA preview request.
=============================================================================================
BisonC07Install-D(0909302044)-V(9.2.1.70.2)-S()-C(Clevo)-APP
Date : 2009/09/30 20:44
Versiion : 9.2.1.70.2
note : Update new application for memory issue of snap.
=============================================================================================
BisonC07Install-D(0910132118)-V(9.2.1.70.3)-S()-C(Clevo)-APP
Date : 2009/10/13 21:18
Versiion : 9.2.1.70.3
note : Update new application of BisonCap.exe to fix stop working issue.
=============================================================================================
BisonC07Install-D(0910160039)-V(9.2.1.71.1)-S()-C(Clevo)-APP
Date : 2009/10/16 00:39
Versiion : 9.2.1.71.1
note : Update new application of BisonCap.exe to fix snap issue.