Biostar NF61S Micro AM2 SE 6.x Download Drivers, Utilities, Manual et BIOS

To support 45w CPU. With Biostar logo.

To support AMD G2 CPU. With Biostar logo.

BIOS Update
BIOS Update is a convenient utility which allows you to update your motherboard BIOS
under Windows system.
Update BIOS
with a BIOS file
Clear CMOS function
(Only for AWARD BIOS)
Show current BIOS information
Save current BIOS
to a .bin file
AWARD BIOS AMI BIOS
Online Update function
(Only for AMI BIOS)
<Backup BIOS>
Once click on this button, the
saving dialog will show.
Choose the position to save file
and enter file name. (We
recommend that the file name
should be English/number and
no longer than 7 characters.)
Then click Save.
After the saving process, finish
dialog will show. Click on OK to
complete the BIOS Backup
procedure.
<Update BIOS>
Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click
on OK to restart the system.
While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
<Online Update> (for AMI BIOS only)
Automatically download and update the latest BIOS via internet; make sure that
the computer is connected to the internet before using this function.
After clicking on the Online Update
button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click Yes to
proceed.
If there is no other newer BIOS
version, the utility will also tell you that
your BIOS has been the latest version.
Download completes; the utility will
ask you to program (update) the
BIOS. Click Yes to proceed.
The programming procedure may take minutes, please do not make any
operation during the programming process.
After the updating process, the utility will
ask you to reboot the system. Click OK
to reboot.
While the system boots up and the full screen logo shows, press <Delete>
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. Online Update is completed.

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

Contents on the disk
====================
README TXT This readme file
AHCIx86 Microsoft Windows miniport disk label file
AHCIx64 Microsoft Windows miniport disk label file
TXTSETUP OEM Microsoft Windows miniport text mode setup file
x86\AHCIx86 INF Microsoft Windows miniport setup file
x86\AHCIx86 SYS Microsoft Windows miniport driver for x86 compatible platforms
x86\AHCIx86 CAT Microsoft Windows WHQL Certified catalog file (place holder)
x64\AHCIx64 INF Microsoft Windows miniport setup file
x64\AHCIx64 SYS Microsoft Windows miniport driver for x64 platforms
x64\AHCIx64 CAT Microsoft Windows WHQL Certified catalog file (place holder)

================
Software Version
================
Microsoft Windows miniport driver 2.5.1540.39

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

Driver Installation/Removal Procedure For Realtek High Definition Audio Codec:
=================================================================================

<<< For Windows 2000/XP/Vista x86/x64 (WDM driver) >>>

---------------------------------------
Setup Driver at first time:
---------------------------------------

Step 1. Before installing the Realtek HD Audio Drivers, Press the
[Cancel] button if Windows detect the Multimedia Audio device.

Step 2. Insert the "Realtek HD Audio Drivers" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek HD Audio Drivers" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

BIOS Update is a convenient utility which allows you to update your motherboard BIOS

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

Driver Installation/Removal Procedure For Realtek High Definition Audio Codec:
=================================================================================

<<< For Windows 2000/XP/Vista x86/x64 (WDM driver) >>>

---------------------------------------
Setup Driver at first time:
---------------------------------------

Step 1. Before installing the Realtek HD Audio Drivers, Press the
[Cancel] button if Windows detect the Multimedia Audio device.

Step 2. Insert the "Realtek HD Audio Drivers" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek HD Audio Drivers" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)

This WinXP 64-bit nForce (C51/MCP51 and C19/MCP51) driver package consists of the following components:

Ethernet Driver MCP51 (v50.23) "WHQL"
Network Management Tools MCP51 (v50.23)
SMBus Driver (v4.52) "WHQL"
Installer (v4.93)
WinXP IDE SataRAID Driver (v6.54) "WHQL"
WinXP IDE SataIDE Driver (v6.54) "WHQL"
WinXP RAIDTOOL Application (v6.54)