JVC GV-DT1E Download Drivers

This documentation includes information on the "JVC GV-DT1 Capture" Utility which transfers video images into your PC through the GV-DT1, and the Printer Driver that is used to print out PC data on the GV-DT1, that are not mentioned in the instruction manual.
Please read this document before use.

Application Printer Model: GV-DT1
Application Version: JVC GV-DT1 Capture Ver. 1.0
Printer Driver Ver. 1.0
(Created 15 Jan. 1998)

------------------------------------------------------------------------------------------------


Damage may result if the printer cable is attached or detached while the printer or PC's power is turned on. Please make sure that power is turned off when connecting/disconnecting.

[Applicable Models]
There is no assurance of proper operation unless the computer used is a DOS model with Bi-Directional Parallel port, which meets the criteria listed below.

[CPU] i486DX2 or higher
[Free memory] More than 16MB

The GV-DT1's "JVC GV-DT1 Capture" utility and Printer Driver can be used with Windows 3.1 or Windows 95. Printing from Windows NT and MS-DOS is not possible.

Please use only after making sure that your PC meets the above-mentioned conditions.

The GV-DT1's "JVC GV-DT1 Capture" utility and Printer Driver were developed for use in a Windows environment which supports Parallel port Bi-Directional interface.

-----------------------------------------------------------------------------------------------------

If you are using Windows 95 , and the message " Failed in connecting with a printer." appears even if you checked printer type, cable connection, and, On-Line, perform the following steps.
1) Double click the icon for "My Computer" / "Control Panel" / "System", then open the "System Properties" window.
2) Click the "Device Manager" tab in the "System Property" window, and double click the "Ports" mark in the window, and confirm that the name of LPT1: is "Printer Port".

If the name of LPT1: is "ECP Printer Port", perform the following steps 3)-8).

3) Double click the connector mark where "ECP Printer Port" is shown, open the "Property of ECP Printer Port" window.
4) Double click the Tab for "Driver" in the "ECP Printer Port" window and click the button "Change the driver" at bottom-right, then the "Select Device" window will open.
5) Select "Indicate All Devices" radio button at the bottom-left of the "Select Device" window, the Menu frame for "Manufacturer (M)" "Model (D)" appears.
6) After clicking to select "(Standard Port)" of "Manufacturer (M)" followed by "Printer Port" of "Model (D)", click the "OK" button at the bottom-right.
7) Click "OK" button in the "Property of ECP Printer Port" window, then click the "OK" button of "Property of System" window.
8) Restart Windows.

If you follow the above instructions and the message " Failed in connecting with a printer." continues to appear, procure the "Windows 95 Service pack 1" and re-install. Contact Microsoft Inc. on how to get the "Windows 95 Service pack 1".