Abit HotRod 66 - HPT366 Download Treibers

v 1.25 03/31/2000
o Fix HPT366 Windows 98 shutdown issue on certain hard disks
o Fix Windows 98 SE "stand by" problem on certain hard disks
o Add signature file into INF

v 1.24 03/06/2000
o Fix large files copy issues
o Add IC controller revision check
o Modify INF to a generic Win98 INF file for HPT3xx series
o adapter.

v 1.23 02/15/2000
o Fix compatibility problem with SamSung ATA66 hard disk

v 1.22 12/23/99
o Fix system hung-up during large files copy by adding error
recovering process
o Fix compatibility on Seagate Barracuda hard disks

v 1.21 o Fix compatability problem on Maxtor 20GB hard disk
o Fix VxD problem which causes VCOMM error when no device
is connected on UDMA66 channels

This readme provides the information needed to install and use the HPT366
device driver for Microsoft Windows NT 4.0.

The Windows NT sub-directory (\NT) on the driver diskette contains the
following files:
HPT366.SYS A HPT366 device driver for Windows NT 4.0
OEMSETUP.INF A file used by Windows NT 4.0 Setup for driver
installation
README.TXT An ASCII text file describing the HPT366 device
driver for Windows NT 4.0
TEXTSETUP.OEM A file used during Windows NT installation
HPT366.TAG A tag file required during during Windows NT installation
DISK1 A flag of device driver which is required during Windows
NT installation
#############################################################################

The first time install a Windows NT system with HPT366 device driver

1. Install Windows NT from CD-ROM without specifing any option

2. Windows NT will create three floppies for second phase installation

3. Install Windows NT from the floppy

4. When Windows NT ask for addtional host adapter, please slect SCSI
type host adapter

5. Then Windows NT will ask you to install device driver for that SCSI
type host adapter (HPT366)

6. After installation HPT366 files from floppy, users can see "HPT366
Ultra DMA hosta dapter"

7. Following the step to continue installation of Windows NT