BenQ CD 656A Download Treibers, Manuell und Firmware

Firmware Version detection tool for MS Windows. IDE drive firmware detection tool. Run this to find out the current firmware version of your IDE drives ( CDROM / DVDROM / CDREWRITER ). Works in MS Windows.

BenQ CDROM 656A-0xx, 656A-2xx and 656A-6xx model. Firmware Upgrade for BenQ CDROM 656.xA series.

BenQ CDROM 656A-4xx, and 656a-8xx model. Firmware Upgrade for BenQ CDROM 656.xD series .

Release Notes:

- Added solution for disc auto-play function in Windows XP SP2.
- Added solution for Norton Ghost compatibility issue.

BenQ MS-DOS Firmware upgrade for BenQ CDROM 656A with "xP" base firmware.
Not suitable for other versions. Please use an MS-DOS startup diskette with CDROM Support
to update the firmware.

Release Notes:

- Change the start up flow for small capacity disc which can’t be detected.

BenQ MS-DOS Firmware upgrade for BenQ CDROM 656A with "xP" base firmware.
Not suitable for other versions. Please use an MS-DOS startup diskette with CDROM Support
to update the firmware.

BenQ CDROM 656A-1xx, and 656A-5xx model. Firmware Upgrade for BenQ CDROM 656.xV series.

BenQ CDROM 656A - 3xx, and 656A-7xx model. Firmware Upgrade for BenQ CDROM 656.xW series.

Please use this tool to check your current firmware.

Software Installation
For Windows 95 or OS/2 Warp, no external device
driver is needed. For DOS and Windows 3.1, the
procedure for installation is as follows:
4 User’s Guide
1. Turn on your computer with DOS booting.
2. Insert the CD-ROM Device Driver disk into a
3.5” floppy disk drive.
3. At the command prompt, type the drive letter
of the drive you’re using, followed by a colon
(:), and then press Enter.
4. Type setup, and then press Enter.
5. Follow the instructions on the screen.
6. You can choose Express Setup or Custom
Setup. It is recommended that you use
Express Setup; however, you can use
Custom Setup if you are an experienced user.
7. Reboot your system.
NOTE: Please read the README file in the device
driver disk to learn more about using this
drive.

CDROM / DVDROM / CDREWRITER MS-DOS Driver . Self-extracting ZIP file containing device driver file for MS-DOS Only

A B O U T C D - R O M D E V I C E D R I V E R
=======================================================================

To install the CD-ROM device driver, the syntax in CONFIG.SYS
is as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 [/P:xxx,yy] [/L:xx]

where [/P:xxx,yy]
specifies the IDE port which is connected to the drive and the
interrupt request.

'xxx' is the base address (hexadecimal notation) of IDE port.
xxx = 1f0 : Port 1
170 : Port 2
1e8 : Port 3
168 : Port 4

'yy' is the interrupt number (decimal notation) of the
corresponding IDE port.

[/L:xx]
specifies the message language. Available options are listed
as below:

xx = US : English (the default language)
GR : German
FR : French
SP : Spanish
IT : Italian
JP : Japanese

For example, when eight drives are installed, the command
line in the CONFIG.SYS file could be entered as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 /P:1f0,14 /P:170,15 /P:1e8,12 /P:168,10

NOTE:

Our device driver will automatically search the drives for 4 ports
up to 8 drives, and the ports are 0x1f0, 0x170, 0x1e8 and 0x168 with
interrupt number 14, 15, 12 and 10 as default, respectively. If your
IDE ports and their respective interrupt numbers are the same as
those mentioned above, you don't have to specify them verbosely.

Instalación del software
Para Windows 95 o OS/2 Warp no se necesita un
controlador de dispositivo externo. Para DOS y
Windows 3.1, el procedimiento de instalación es el
descrito a continuación:
4 Guí a del usuario
1. Arranque el sistema hasta que aparezca la
señal de DOS (no arranque en Windows.)
2. Introduzca el disco que contiene los
controiadores de dispositivo para unidad de
CD-ROM en una unidad de disquetes de 3.5
pulgadas.
3. Escriba la letra de la disquetera, luego los
dos puntos (:) y de seguido presione Entrar
4. Escriba SETUP y presione Entrar.
5. Siga las instrucciones que aparecerán en
pantalla.
6. Puede seleccionar entre Express Setup o
Custom Setup. Se recomienda que use el
Express Setup. Custom Setup es para
usuarios con experiencia.
7. Reinicie su sistema.
NOTA:Lea el archivo README incluido en el
disco que contiene los controladores de dispositivo
para obtaner más información sobre la manera de
utilzar esta unidad.