Digital Research DRCDRom24- US Drives Download Treibers

CDRom driver files are not needed for Windows 9x or NT README file for ATAPI CD-ROM device driver
================================================
I. Introduction
II. Requirements
III. Installation Procedures
IV. Changing Settings after Installation
I. Introduction
================
This CD-ROM package comes with an installation utility. This utility
installs the necessary CD-ROM software device driver needed by your
CD-ROM drive to interface with your PC system.

Files
-----
The drive installation diskette includes the following files:

README.TXT -- This user information text file
INSTALL.EXE -- CD-ROM installation program
AOATAPI.SYS -- CD-ROM device driver

II. Requirements
=================
Hardware Requirements
---------------------
1. IBM PC/AT or compatible (80386-base system or higher recommended)
2. Minimum VGA graphic display
3. Minimum 2M RAM recommended
4. one free IDE socket
5. one CD-ROM drive

Software Requirement
--------------------
1. Microsoft Windows 3.1 or later
2. MS-DOS version 6.0 or later
3. MS-DOS CD-Extension (MSCDEX 2.21) or later

III. Installation Procedures
============================

To install CD-ROM device driver, please follow the steps below:

1. Insert the installation diskette in your system's 3.5-inch floppy
disk drive.

2. Change the directory to that of your floppy disk drive, and type
the following at the DOS prompt:

INSTALL

3. Follow the screen instructions to complete the installation.

4. Reboot system to activate the driver.
In general, you can just continuously press the Enter key to install
the default settings. A directory (default C:\CDROM) containing the
CD-ROM driver will be created during installation. Your AUTOEXEC.BAT
and CONFIG.SYS files will also be modified to include the following
lines:

CONFIG.SYS :
[common]
DEVICE=C:\CDROM\AOATAPI.SYS /D:IDECD000
LASTDRIVE=N

AUTOEXEC.BAT :
C:\DOS\MSCDEX.EXE /D:IDECD000