Centos CI-1520U6 Download Treibers und BIOS

This readme provides the information needed to install and use the HPT366
device driver for Microsoft Windows NT 4.0.

The Windows NT sub-directory (\NT) on the driver diskette contains the
following files:
HPT366.SYS A HPT366 device driver for Windows NT 4.0
OEMSETUP.INF A file used by Windows NT 4.0 Setup for driver
installation
README.TXT An ASCII text file describing the HPT366 device
driver for Windows NT 4.0
TEXTSETUP.OEM A file used during Windows NT installation
HPT366.TAG A tag file required during during Windows NT installation
DISK1 A flag of device driver which is required during Windows
NT installation

When Windows NT is up, then install HPT366 device driver as following

1. Installing Device Driver
1. Open My Computer
2. Open Control Panel
3. Double click icon SCSI Adapters
4. Click Drivers
5. Click Add...
6. Click Have Disk...
7. Insert the floppy diskette containing HPT366 Windows NT 4.0 device
driver into drive A, and type in "A:\NT[Enter]", then click OK
8. Select HPT366 Ultra DMA Controller, you will be asked to enter the
full path to the HPT366 Ultra DMA Controller files, type in A:\NT
and then click Continue
9. When asked to restart your computer, click Yes

Your hard disk drive attached to the HPT366 host adapter must be
partitioned and formatted before you can access it. Please see
Partitioning Your Hard Disk to know how to partition and format a hard
disk drive.

2. Checking the Installation
If you want to check if the HPT366 host adapter and its device driver are
correctly installed, you can:
1. Open My Computer
2. Open Control Panel
3. Double click icon SCSI Adapters
4. You should see the item HPT366 Ultra DMA Controller (started) listed

3. Partitioning Your Hard Disk
If the hard disk drive attached to the HPT366 host adapter has not been
partitioned and formatted yet, you need to partition it first. To
partition the hard disk drive attached to the HPT366 host adapter, follow
the following steps:
1. Click the Startup button
2. Go to Administrative Tools (Common)
3. Run Disk Administrator
4. Select disk number you would like to partition
5. Select the menu Partition
6. Decide the partition size create partition of the size
7. Exit Disk Administrator
8. Select the new created partition (logical disk drive) and format it