Askey V1456VQH-P1 INT Download Treibers

How to Install PCtel HSP Modems on Windows NT Workstation 5.0

Contents:
i. PnP/PCI modem installation

i. PnP/PCI modem installation


Plug your modem(ISA PNP modem or PCI modem) into a free slot of
your computer and turn the power on, you may receive a message that
Windows NT has detected your Plug and Play device(s).

When the modem has been detected, use the following steps:

1. Install the new device from the modem driver disk.
Note:
If Windows NT does not copy files during the installation, please
goto "Windows NT/Inf" directory and delete unused "oem*.inf" and "oem*.pnf"
files, then try again.

How to Install PCtel HSP Modems on Windows NT Workstation 4.0

Contents:
i. PnP modem installation
ii. Non-PnP/PCI modem installation
iii. PCMCIA modem installation
iv. Uninstall the PCtel HSP Modem

i. PnP modem installation

Before installing PCtel modem drivers, the PnP ISA Enabler driver must
be installed. The driver library on the Windows NT 4.0 CD-ROM includes the
PnP ISA Enabler driver, which will allow the detection and installation of
Plug and Play devices in Windows NT 4.0. Install the PnP ISA Enabler
driver (PNPISA) using the following steps:

NOTE: Although Windows NT includes PNPISA to detect Plug and Play
devices, Plug and Play devices are not supported in Windows NT 4.0.
PNPISA is provided as a "use at your own risk" tool.