Aztech MS 5000-U Download Treibers

Pentium MMX Modem Driver
========================
This Installation Diskette contains the Pentium MMX modem driver.

Installation on Win 95 Platform
===============================
1. Win95 will automatically detect the MS5000 PnP Modem Card
and displays the "New Hardware Found" dialog box.

2. Insert the installation diskette provided into either drive
A or B.

3. Select the "Driver from disk provided by Hardware manufacturer
option and click OK.

4. Type A:\ (or B:\) in the combo box and click OK.

You might encounter some resource conflicts after loading the PnP modem
device (especially when there are non-Plug & Play adaptors installed in
your system). To alter the resource configurations, go to Control Panel
- System - Device Manager and click on "Modem". Choose the modem device
and click on "Properties". You can change the settings for both comport
and interrupt. For choosing interrupts, you can select IRQ 3,4,5,10,11,
15 depending which are available.

For further details, please refer to Trouble-shooting section in Windows 95.
Installation on Win 95/OSR2 Platform
=====================================
1. Win95 will automatically detect the MS5000 PnP Modem Card after
which the system will prompt the "Update Device Driver Wizard"
dialog box.

2. Insert the installation diskette provided into either drive
A or B.

3. Click "Next" to let system search for an updated driver.

4. Click "Finish" to use the found driver.

5. Click "Ok" when prompted to insert the installation disk.

6. Change path to A:\ (or B:\) and click OK.

7. System will then automatically load all the necessary drivers and
files needed.

You might encounter some resource conflicts after loading the PnP
modem device (especially when there are non-Plug & Play adaptors installed
in your system). Please refer to Trouble-shooting section in Windows 95 for
further details.

Installation on Win NT 4.0 Platform
====================================
Please make sure that your WinNT 4.0 is updated to the latest Service Pack
and the WinNT 4.0 Plug & Play is enabled before installing the driver for
MS5000 PnP Modem Card.

1. NT 4.0 will automatically detect the MS5000 PnP Modem Card
and displays the "New Hardware Found" dialog box.

2. Insert the installation diskette provided into either drive
A or B.

3. Select the "Driver from disk provided by Hardware manufacturer
option and click OK.

4. Type A:\ (or B:\) in the combo box and click OK.
You might encounter some resource conflicts after loading the PnP modem
device (especially when there are non-Plug & Play adaptors installed in
your system). To alter the resource configurations, go to Control Panel
- Ports - Setting and click on "Advanced" button followed by the
Resource tab. You can change the settings for both comport and interrupt.
For choosing interrupts, you can select IRQ 3,4,5,10,11,15 depending
which are available.

For further details, please refer to Trouble-shooting section in Windows NT.
Modem AT Command Set
====================
The AT Command Instructions Set for the Modem hardware is now available
in Microsoft Word format (ATCOMSET.DOC). It is available in the software
diskette provided from manufacturer. This document has also been copied
into \Winnt directory during installation.
Others
======
Please note that:-
1. Win NT 4.0 does not support Fax and Voice operation.