Axper XP-P5IM800P Download Treibers, Manuell und BIOS

Contents
Motherboard Layout ........................................................................4
1. Product Introduction..................................................................5
1.1. Feature Summary.............................................................................. 5
1.2. I/O Back Panel and Connectors & Jumper Setting ........................... 6
1.2.1. I/O Back Panel ...................................................................................... 6
1.2.2. Connectors & Jumper Setting .............................................................. 6
2. Hardware Installation ................................................................9
2.1. Installation of a LGA775 Pentium 4 CPU and Fan Sink ................. 10
2.1.1. Installation of a LGA775 CPU ............................................................ 10
2.1.2. Installation of Fan Sink ....................................................................... 10
2.2. Installation of Memory ...................................................................... 11
2.3. Installation of the Graphics Card ..................................................... 12
3. BIOS Setup ............................................................................ 13
3.1. Setup Screen Features (BIOS version: E1) .................................... 13
3.2. Standard CMOS Features............................................................... 14
3.3. Advanced BIOS Features ............................................................... 16
3.4. Integrated Peripherals ..................................................................... 17
3.5. Power Management Setup.............................................................. 19
3.6. PnP/PCI Configuration .................................................................... 20
3.7. PC Health Status ............................................................................. 21
3.8. Frequency/Voltage Control.............................................................. 22
3.9. Load Fail-Safe Defaults ................................................................... 23
3.10. Load Optimized Defaults ................................................................. 23
3.11. Set User Password .......................................................................... 23
3.12. Save & Exit Setup............................................................................ 23
3.13. Exit Without Saving ......................................................................... 23
4. Driver Installation .................................................................... 24

This document contains the following sections:

1. Overview
2. System Requirements
3. Contents of the Distribution Package
4. List of Available Command Line Flag Options
5. Contents of the Extracted Files
6. Installing the Software in Interactive Mode
7. Installing the Software in Silent Mode
8. Installing the INF Files Prior to OS Installation
8A. Installing the Windows* 98SE/Windows* Me
INF Files Prior to OS Installation
8B. Installing the Windows* 2000 INF Files Prior
to OS Installation
8C. Installing the Windows* XP INF Files Prior
to OS Installation
8D. Installing the Windows Server* 2003 INF Files
Prior to OS Installation
9. Installing the INF Files After OS Installation
9A. Installing the Windows* 98SE/Windows* Me INF
Files After OS Installation
9B. Installing the Windows* 2000 INF Files After
OS Installation
9C. Installing the Windows* XP INF Files After
OS Installation
9D. Installing the Windows Server* 2003 INF Files
After OS Installation
10. Verifying Installation of the Software and
Identifying the Software Version Number
11. Troubleshooting

README CONTENTS
===============

1. Overview
2. Supported Operating Systems
3. Installation Notes
4. Known Issues
5. INTEL SOFTWARE LICENSE AGREEMENT

This document contains the following sections:

1. Overview
2. System Requirements
3. Language Support
4. Installing the Software
5. Verifying Installation of the Software
6. Advanced Installation Instructions
7. Identifying the Software Version Number
8. Uninstalling the Software

Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:
=================================================================================

<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

----------------
Setup for Manual
----------------
1. Double-click the "System" icon to open the "System Properties" dialog from Control Panel .
2. Choose "Hardware" tab and click the "Device Manager" button .
3. Please right-click mouse on "MultiMedia Audio Controller" and choose the "Properties" menu item
to show the driver details.
4. Click the "Driver" tab and then click the "Update Driver..." button for update.
5. Please follow the instructions of the "Upgrade Device Driver Wizard".
6. Choose "Search for a suitable driver for my device" and click the "Next" button.
7. Please specify the driver location/source and then click the "Next" button in this case,
"Specify a location" has been chosen.
8. If "Specify driver location" is chosen, the Wizard will ask for the path where the driver is located.
9. Click the "Next" button to install Audio Driver on "Driver Files Search Results".
10. If the "Digital Signature Not Found" dialog is opened, click the "Yes" button to continue
the Installation.
11. After completing the above steps, the drier has been installed into the system.
Please click "Finish" button to complete the installation.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver/Application:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek AC'97 Audio" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
<<< For WinNT 4.0 (NT4 driver) >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Ignore Step 1, and follow the same procedure in Win2000/WinME/WinXP.

--------------------------
Update Driver/Application:
--------------------------

The same procedure in Win2000/WinME/WinXP.

--------------------------
Remove Driver/Application:
--------------------------

The same procedure in Win2000/WinME/WinXP.