Abit BE7-G Onboard Lan Broadcom 10-100-1000 Mb Download Treibers

BCM570x DOS/OS2 NDIS2 Driver (1.13 replaces 1.10)

- Hanle Transmit Segment equal to 0 for OS2 Granite trap.
- Fixed problem with the RPL boot up, the driver hangs while downloading file image.
The Boot Block Configuration file *.cnf MUST specify in the DRV Type's second field
the additional memory (53KB-60KB) used by the driver as follows:

DRV BBLOCK\NDIS\B57.DOS ~ 53 ~

Block re-entrance during Interrupt handler loop in OS2 driver.
Hanle Transmit Segment equal to 0 for OS2 Granite trap-this does not work.

Fixed a low performance problem with BCM5701 Serdes LOMs with Copper Trace
media. As in the PXE v2.1.2.

Port number correction.

- Minor Modification to accommodate IBM IEEE 802.2 Protocol.

Netware ODI Driver (2.32 replaces 2.29)

- Fixed bug in tx checksum that prevented snmp events.
- Added delays in driver for initialization.

BCM570x DOS ODI Driver - b57.com

No changes in this release.

Netware SNMP

No changes in this release.

BCM570x Linux Driver (2.2.27 replaces 2.2.20)

- Added additional workaround for 5703 on dual AMD CPUs using AMD762 chipset.
- Adjusted EEPROM delay loop.
- Fixed some minor proc file problems.
- Added 802.1Q VLAN
- Added a locking scheme for PHY access.
- Fixed an intermittent crash problem with fiber NICs.
- Adjusted fiber autoneg. logic to work with 3Com 4900SX switch.
- Fixed intermittent VPD read failure.
- Added netif_carrier_on and netif_carrier_off.
- Fixed some documentation errors.
- Fixed a hang problem with BCM5700 NICs.
- Fixed compile problem on RH7.3 with HIGHMEM enabled.
- Fixed non-zero stats on 5700/5701 when stats_coalesce_ticks is set to 0.