Aten CN8000 Download Treibers, Manuell und Firmware

1.Added CC2000 support
2.Supports the Log server's log info priority.
3.Auto Syncs PN0108's Date/Time.
4.Improved slow response time with 10Mbps LAN Hub.
5.Improve IBM Blade compatibility.
Note: You must use CC2000 Software v1.0.092 or higher with this release.

1. Fixed the Firefox can not save the ANMS settings issue.
2. Supports DNS and NetBIOS.
3. Does mouse Auto Sync after video sync.
4. Supports mapping two virtual media devices.
5. Moved the default OSD bar to top-middle edge.
6. In multi-user mode: different video connections can have different frame rates and video quality.
7. Force to Grayscale mode invoked when PPP video connection is established, and PPP video quality is forced to the lowest level.

Initial Release

Network Adapter:
The Network Adapter selection box, located just below the Device List,
pertains to computers that have more than one network adapter installed. Users
can use this to select the adapter that they want Enumerate to be directed to.
Set IP:
There are two methods of specifying an IP address: Dynamic, and Static:
?? If you want to obtain an IP address dynamically, select Obtain an IP address
automatically (DHCP).
?? If you want to use a static IP address, select Specify an IP address, then fill in
the information for IP Address, Subnet Mask, and Gateway.
After you have made your selection, click Set IP to set the IP address for the
device.
Note: The screen will freeze for a moment or two until the utility has finished
setting the IP.