Canon CanoScan 300 Download Treibers
Verfügbare 5 dateien für CanoScan 300
Firma
Canon
Komponente
Scanner
Modell
Canon CanoScan 300
Beschreibung
CanoScan 300 ScanGear Toolbox CS
Betriebssystem
Windows 95-98-Me-NT4-2000
Version Driver
v2.2.3
Größe
2.1Mb
Dateiname
sgtbcs223.exe
Beschreibung
Scangear Toolbox is a Scanning Utility Application. A Twain driver for the Scanner must be also be installed in order to operate the scanner.
Firma
Canon
Komponente
Scanner
Modell
Canon CanoScan 300
Beschreibung
CanoScan 300 ScanGear CS-S Twain
Betriebssystem
Windows 95-NT4
Version Driver
v5.5.3
Größe
110Kb
Dateiname
sgcss553_w95nt4.exe
Beschreibung
ScanGear CS-S 5.5.3
----------------------------------------------------------------
1. ScanGear CS-S 5.5 Features
ScanGear CS-S 5.5 (hereafter referred to as "ScanGear CS-S") is a
32-bit TWAIN-compliant scanner driver for the Canon CanoScan
300, 600, FB620S or FB1200S scanners. When this driver is selected
from within a TWAIN-compliant software application program, one of
these scanners can be used to scan image data.
2. What You Need
Required Hardware
o CanoScan 300, 600, FB620S or FB1200S Scanner.
o An ASPI-compatible SCSI host adapter for Windows 95, Windows NT 4.0,
Windows 2000 and Windows Me
o 80486 MHz CPU or higher (Pentium 60 MHz or higher recommended) IBM
or IBM compatible PC
o 16 MB RAM (32 MB more recommended) for Windows 95
o 24 MB RAM (32 MB more recommended) for Windows 98
o 32 MB RAM (64 MB more recommended) for Windows NT 4.0
o 32 MB RAM (64 MB more recommended) for Windows 2000
o 32 MB RAM (64 MB more recommended) for Windows Me
o 5 MB of free disk space for ScanGear CS-S installation.
o Free disk space, at least 50 MB. The amount of space required
depends on the scanning area and the Color Mode or Resolution
setting. (Color images scanned at higher resolution require
more storage space.)
o Minimum requirement for monitor: 800 x 600 resolution, 256-
color (higher resolution with TrueColor recommended)
Required Software
o Microsoft Windows 95, 98, NT 4.0(Service Pack 3 or later), 2000
or Me
o TWAIN-compliant application software
3. A General Tip on Usage Canon CanoScan 300
o Run only one application at a time which uses ScanGear CS-S ; do
not open more than one application that uses the ScanGear CS-S
scanner driver. Also, do not open ScanGear CS-S more than once
to acquire an image in the same application.
o If you scan a very large image at high resolution, some
applications may determine that there is not enough disk space
to scan and save the image and return an error.
o Always close the ScanGear CS-S main window before you exit the
parent application program.
o For Windows NT 4.0 or 2000, it is required that the system administrator
install or uninstall ScanGear CS-S.
o In Windows NT 4.0 or 2000 when the system file is in NTFS format,
occasionally the TWAIN data source may not open correctly. For security
reasons, the TWAIN module cannot be written to the winnt directory.
For details, contact your system administrator.
4. Running ScanGear CS-S with Specific Applications
o If you are using TextBridge Plus, the TextBridge windows could be
displayed over the ScanGear CS-S window. If this occurs, use the
mouse to shift the focus to the ScanGear CS-S window and perform the
ScanGear CS-S settings.
o If you are scanning originals from an ADF installed on a CanoScan 300
or CanoScan 600, in TextBridge Pro 9.0 the Legal paper size setting
cannot be selected with the Scanner Setup command in the Tools menu.
In this case, use the Paper Size setting in the ScanGear CS-S main
window to select the Legal paper size.
----------------------------------------------------------------
1. ScanGear CS-S 5.5 Features
ScanGear CS-S 5.5 (hereafter referred to as "ScanGear CS-S") is a
32-bit TWAIN-compliant scanner driver for the Canon CanoScan
300, 600, FB620S or FB1200S scanners. When this driver is selected
from within a TWAIN-compliant software application program, one of
these scanners can be used to scan image data.
2. What You Need
Required Hardware
o CanoScan 300, 600, FB620S or FB1200S Scanner.
o An ASPI-compatible SCSI host adapter for Windows 95, Windows NT 4.0,
Windows 2000 and Windows Me
o 80486 MHz CPU or higher (Pentium 60 MHz or higher recommended) IBM
or IBM compatible PC
o 16 MB RAM (32 MB more recommended) for Windows 95
o 24 MB RAM (32 MB more recommended) for Windows 98
o 32 MB RAM (64 MB more recommended) for Windows NT 4.0
o 32 MB RAM (64 MB more recommended) for Windows 2000
o 32 MB RAM (64 MB more recommended) for Windows Me
o 5 MB of free disk space for ScanGear CS-S installation.
o Free disk space, at least 50 MB. The amount of space required
depends on the scanning area and the Color Mode or Resolution
setting. (Color images scanned at higher resolution require
more storage space.)
o Minimum requirement for monitor: 800 x 600 resolution, 256-
color (higher resolution with TrueColor recommended)
Required Software
o Microsoft Windows 95, 98, NT 4.0(Service Pack 3 or later), 2000
or Me
o TWAIN-compliant application software
3. A General Tip on Usage Canon CanoScan 300
o Run only one application at a time which uses ScanGear CS-S ; do
not open more than one application that uses the ScanGear CS-S
scanner driver. Also, do not open ScanGear CS-S more than once
to acquire an image in the same application.
o If you scan a very large image at high resolution, some
applications may determine that there is not enough disk space
to scan and save the image and return an error.
o Always close the ScanGear CS-S main window before you exit the
parent application program.
o For Windows NT 4.0 or 2000, it is required that the system administrator
install or uninstall ScanGear CS-S.
o In Windows NT 4.0 or 2000 when the system file is in NTFS format,
occasionally the TWAIN data source may not open correctly. For security
reasons, the TWAIN module cannot be written to the winnt directory.
For details, contact your system administrator.
4. Running ScanGear CS-S with Specific Applications
o If you are using TextBridge Plus, the TextBridge windows could be
displayed over the ScanGear CS-S window. If this occurs, use the
mouse to shift the focus to the ScanGear CS-S window and perform the
ScanGear CS-S settings.
o If you are scanning originals from an ADF installed on a CanoScan 300
or CanoScan 600, in TextBridge Pro 9.0 the Legal paper size setting
cannot be selected with the Scanner Setup command in the Tools menu.
In this case, use the Paper Size setting in the ScanGear CS-S main
window to select the Legal paper size.
Firma
Canon
Komponente
Scanner
Modell
Canon CanoScan 300
Beschreibung
CanoScan 300 Driver ScanGear CS-S
Betriebssystem
Windows 95-NT4
Sprache
English
Version Driver
v5.5.3
Größe
3Mb
Dateiname
sg55395nt.exe
Beschreibung
ScanGear CS-S 5.5.3
----------------------------------------------------------------
1. ScanGear CS-S 5.5 Features
ScanGear CS-S 5.5 (hereafter referred to as "ScanGear CS-S") is a
32-bit TWAIN-compliant scanner driver for the Canon CanoScan
300, 600, FB620S or FB1200S scanners. When this driver is selected
from within a TWAIN-compliant software application program, one of
these scanners can be used to scan image data.
2. What You Need
Required Hardware
o CanoScan 300, 600, FB620S or FB1200S Scanner.
o An ASPI-compatible SCSI host adapter for Windows 95, Windows NT 4.0,
Windows 2000 and Windows Me
o 80486 MHz CPU or higher (Pentium 60 MHz or higher recommended) IBM
or IBM compatible PC
o 16 MB RAM (32 MB more recommended) for Windows 95
o 24 MB RAM (32 MB more recommended) for Windows 98
o 32 MB RAM (64 MB more recommended) for Windows NT 4.0
o 32 MB RAM (64 MB more recommended) for Windows 2000
o 32 MB RAM (64 MB more recommended) for Windows Me
o 5 MB of free disk space for ScanGear CS-S installation.
o Free disk space, at least 50 MB. The amount of space required
depends on the scanning area and the Color Mode or Resolution
setting. (Color images scanned at higher resolution require
more storage space.)
o Minimum requirement for monitor: 800 x 600 resolution, 256-
color (higher resolution with TrueColor recommended)
Required Software
o Microsoft Windows 95, 98, NT 4.0(Service Pack 3 or later), 2000
or Me
o TWAIN-compliant application software
3. A General Tip on Usage Canon CanoScan 300
o Run only one application at a time which uses ScanGear CS-S ; do
not open more than one application that uses the ScanGear CS-S
scanner driver. Also, do not open ScanGear CS-S more than once
to acquire an image in the same application.
o If you scan a very large image at high resolution, some
applications may determine that there is not enough disk space
to scan and save the image and return an error.
o Always close the ScanGear CS-S main window before you exit the
parent application program.
o For Windows NT 4.0 or 2000, it is required that the system administrator
install or uninstall ScanGear CS-S.
o In Windows NT 4.0 or 2000 when the system file is in NTFS format,
occasionally the TWAIN data source may not open correctly. For security
reasons, the TWAIN module cannot be written to the winnt directory.
For details, contact your system administrator.
4. Running ScanGear CS-S with Specific Applications
o If you are using TextBridge Plus, the TextBridge windows could be
displayed over the ScanGear CS-S window. If this occurs, use the
mouse to shift the focus to the ScanGear CS-S window and perform the
ScanGear CS-S settings.
o If you are scanning originals from an ADF installed on a CanoScan 300
or CanoScan 600, in TextBridge Pro 9.0 the Legal paper size setting
cannot be selected with the Scanner Setup command in the Tools menu.
In this case, use the Paper Size setting in the ScanGear CS-S main
window to select the Legal paper size.
----------------------------------------------------------------
1. ScanGear CS-S 5.5 Features
ScanGear CS-S 5.5 (hereafter referred to as "ScanGear CS-S") is a
32-bit TWAIN-compliant scanner driver for the Canon CanoScan
300, 600, FB620S or FB1200S scanners. When this driver is selected
from within a TWAIN-compliant software application program, one of
these scanners can be used to scan image data.
2. What You Need
Required Hardware
o CanoScan 300, 600, FB620S or FB1200S Scanner.
o An ASPI-compatible SCSI host adapter for Windows 95, Windows NT 4.0,
Windows 2000 and Windows Me
o 80486 MHz CPU or higher (Pentium 60 MHz or higher recommended) IBM
or IBM compatible PC
o 16 MB RAM (32 MB more recommended) for Windows 95
o 24 MB RAM (32 MB more recommended) for Windows 98
o 32 MB RAM (64 MB more recommended) for Windows NT 4.0
o 32 MB RAM (64 MB more recommended) for Windows 2000
o 32 MB RAM (64 MB more recommended) for Windows Me
o 5 MB of free disk space for ScanGear CS-S installation.
o Free disk space, at least 50 MB. The amount of space required
depends on the scanning area and the Color Mode or Resolution
setting. (Color images scanned at higher resolution require
more storage space.)
o Minimum requirement for monitor: 800 x 600 resolution, 256-
color (higher resolution with TrueColor recommended)
Required Software
o Microsoft Windows 95, 98, NT 4.0(Service Pack 3 or later), 2000
or Me
o TWAIN-compliant application software
3. A General Tip on Usage Canon CanoScan 300
o Run only one application at a time which uses ScanGear CS-S ; do
not open more than one application that uses the ScanGear CS-S
scanner driver. Also, do not open ScanGear CS-S more than once
to acquire an image in the same application.
o If you scan a very large image at high resolution, some
applications may determine that there is not enough disk space
to scan and save the image and return an error.
o Always close the ScanGear CS-S main window before you exit the
parent application program.
o For Windows NT 4.0 or 2000, it is required that the system administrator
install or uninstall ScanGear CS-S.
o In Windows NT 4.0 or 2000 when the system file is in NTFS format,
occasionally the TWAIN data source may not open correctly. For security
reasons, the TWAIN module cannot be written to the winnt directory.
For details, contact your system administrator.
4. Running ScanGear CS-S with Specific Applications
o If you are using TextBridge Plus, the TextBridge windows could be
displayed over the ScanGear CS-S window. If this occurs, use the
mouse to shift the focus to the ScanGear CS-S window and perform the
ScanGear CS-S settings.
o If you are scanning originals from an ADF installed on a CanoScan 300
or CanoScan 600, in TextBridge Pro 9.0 the Legal paper size setting
cannot be selected with the Scanner Setup command in the Tools menu.
In this case, use the Paper Size setting in the ScanGear CS-S main
window to select the Legal paper size.
Firma
Canon
Komponente
Scanner
Modell
Canon CanoScan 300
Beschreibung
CanoScan 300 Driver ScanGear CS-S
Betriebssystem
Windows 98-98Se-Me-2000-XP
Sprache
English
Version Driver
v5.5.3
Größe
1.7Mb
Dateiname
sg553me.exe
Beschreibung
ScanGear CS-S 5.5.3
----------------------------------------------------------------
1. ScanGear CS-S 5.5 Features
ScanGear CS-S 5.5 (hereafter referred to as "ScanGear CS-S") is a
32-bit TWAIN-compliant scanner driver for the Canon CanoScan
300, 600, FB620S or FB1200S scanners. When this driver is selected
from within a TWAIN-compliant software application program, one of
these scanners can be used to scan image data.
2. What You Need
Required Hardware
o CanoScan 300, 600, FB620S or FB1200S Scanner.
o An ASPI-compatible SCSI host adapter for Windows 95, Windows NT 4.0,
Windows 2000 and Windows Me
o 80486 MHz CPU or higher (Pentium 60 MHz or higher recommended) IBM
or IBM compatible PC
o 16 MB RAM (32 MB more recommended) for Windows 95
o 24 MB RAM (32 MB more recommended) for Windows 98
o 32 MB RAM (64 MB more recommended) for Windows NT 4.0
o 32 MB RAM (64 MB more recommended) for Windows 2000
o 32 MB RAM (64 MB more recommended) for Windows Me
o 5 MB of free disk space for ScanGear CS-S installation.
o Free disk space, at least 50 MB. The amount of space required
depends on the scanning area and the Color Mode or Resolution
setting. (Color images scanned at higher resolution require
more storage space.)
o Minimum requirement for monitor: 800 x 600 resolution, 256-
color (higher resolution with TrueColor recommended)
Required Software
o Microsoft Windows 95, 98, NT 4.0(Service Pack 3 or later), 2000
or Me
o TWAIN-compliant application software
3. A General Tip on Usage Canon CanoScan 300
o Run only one application at a time which uses ScanGear CS-S ; do
not open more than one application that uses the ScanGear CS-S
scanner driver. Also, do not open ScanGear CS-S more than once
to acquire an image in the same application.
o If you scan a very large image at high resolution, some
applications may determine that there is not enough disk space
to scan and save the image and return an error.
o Always close the ScanGear CS-S main window before you exit the
parent application program.
o For Windows NT 4.0 or 2000, it is required that the system administrator
install or uninstall ScanGear CS-S.
o In Windows NT 4.0 or 2000 when the system file is in NTFS format,
occasionally the TWAIN data source may not open correctly. For security
reasons, the TWAIN module cannot be written to the winnt directory.
For details, contact your system administrator.
4. Running ScanGear CS-S with Specific Applications
o If you are using TextBridge Plus, the TextBridge windows could be
displayed over the ScanGear CS-S window. If this occurs, use the
mouse to shift the focus to the ScanGear CS-S window and perform the
ScanGear CS-S settings.
o If you are scanning originals from an ADF installed on a CanoScan 300
or CanoScan 600, in TextBridge Pro 9.0 the Legal paper size setting
cannot be selected with the Scanner Setup command in the Tools menu.
In this case, use the Paper Size setting in the ScanGear CS-S main
window to select the Legal paper size.
----------------------------------------------------------------
1. ScanGear CS-S 5.5 Features
ScanGear CS-S 5.5 (hereafter referred to as "ScanGear CS-S") is a
32-bit TWAIN-compliant scanner driver for the Canon CanoScan
300, 600, FB620S or FB1200S scanners. When this driver is selected
from within a TWAIN-compliant software application program, one of
these scanners can be used to scan image data.
2. What You Need
Required Hardware
o CanoScan 300, 600, FB620S or FB1200S Scanner.
o An ASPI-compatible SCSI host adapter for Windows 95, Windows NT 4.0,
Windows 2000 and Windows Me
o 80486 MHz CPU or higher (Pentium 60 MHz or higher recommended) IBM
or IBM compatible PC
o 16 MB RAM (32 MB more recommended) for Windows 95
o 24 MB RAM (32 MB more recommended) for Windows 98
o 32 MB RAM (64 MB more recommended) for Windows NT 4.0
o 32 MB RAM (64 MB more recommended) for Windows 2000
o 32 MB RAM (64 MB more recommended) for Windows Me
o 5 MB of free disk space for ScanGear CS-S installation.
o Free disk space, at least 50 MB. The amount of space required
depends on the scanning area and the Color Mode or Resolution
setting. (Color images scanned at higher resolution require
more storage space.)
o Minimum requirement for monitor: 800 x 600 resolution, 256-
color (higher resolution with TrueColor recommended)
Required Software
o Microsoft Windows 95, 98, NT 4.0(Service Pack 3 or later), 2000
or Me
o TWAIN-compliant application software
3. A General Tip on Usage Canon CanoScan 300
o Run only one application at a time which uses ScanGear CS-S ; do
not open more than one application that uses the ScanGear CS-S
scanner driver. Also, do not open ScanGear CS-S more than once
to acquire an image in the same application.
o If you scan a very large image at high resolution, some
applications may determine that there is not enough disk space
to scan and save the image and return an error.
o Always close the ScanGear CS-S main window before you exit the
parent application program.
o For Windows NT 4.0 or 2000, it is required that the system administrator
install or uninstall ScanGear CS-S.
o In Windows NT 4.0 or 2000 when the system file is in NTFS format,
occasionally the TWAIN data source may not open correctly. For security
reasons, the TWAIN module cannot be written to the winnt directory.
For details, contact your system administrator.
4. Running ScanGear CS-S with Specific Applications
o If you are using TextBridge Plus, the TextBridge windows could be
displayed over the ScanGear CS-S window. If this occurs, use the
mouse to shift the focus to the ScanGear CS-S window and perform the
ScanGear CS-S settings.
o If you are scanning originals from an ADF installed on a CanoScan 300
or CanoScan 600, in TextBridge Pro 9.0 the Legal paper size setting
cannot be selected with the Scanner Setup command in the Tools menu.
In this case, use the Paper Size setting in the ScanGear CS-S main
window to select the Legal paper size.
Firma
Canon
Komponente
Scanner
Modell
Canon CanoScan 300
Beschreibung
CanoScan 300
Betriebssystem
Windows 98-Me-2000-XP
Sprache
German
Version Driver
5.5.3
Größe
1.7Mb
Dateiname
sg553me.exe
