Audiotrak Maya1010 Download Treibers

INSTALLATION
======================================================================

Upgrading from a previous version
======================================================================

Before removing the previous version, stop and close all applications
that are using the 1010 driver.

A. Windows 2000/XP when the current driver is installed using auto
installation (Autoinst.exe; auto installation is not supported
under Windows 98SE/ME)

This installation process is based on the Windows XP system.
Installation on other systems is similar. However, if you experience
any difficulties please contact Audiotrak technical support.

1. Click Start > Control Panel.
2. In the Control Panel window, double-click Add or Remove
Programs.
3. Select 1010 Audio Driver VX.XX and remove the driver.
4. Run Autoinst.exe from this driver package and follow on-screen
instructions. Please ignore any Found New Hardware Wizard
windows which may appear.

note: if the previous driver was not installed using auto install, it
has to be removed using infclear.exe before running autoinst.exe

B. Windows 2000/XP when the current driver was not installed using
auto installation

1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. Ignore any Found New Hardware windows. Run autoinst.exe and
follow on-screen instructions.

C. Windows 2000/XP without auto installation
1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. After system restart, the Found New Hardware Wizard window will
show up. Follow the installation instruction in the manual as if
you are installing a new device.

note: "The search for the best driver in these location" step should
point to the downloaded installation file directory.

If you experience problems restarting Windows after installing new
update, try to change the PCI slot of the ESP/MAYA1010.

INSTALLATION
======================================================================

Upgrading from a previous version
======================================================================

Before removing the previous version, stop and close all applications
that are using the 1010 driver.

A. Windows 2000/XP when the current driver is installed using auto
installation (Autoinst.exe; auto installation is not supported
under Windows 98SE/ME)

This installation process is based on the Windows XP system.
Installation on other systems is similar. However, if you experience
any difficulties please contact Audiotrak technical support.

1. Click Start > Control Panel.
2. In the Control Panel window, double-click Add or Remove
Programs.
3. Select 1010 Audio Driver VX.XX and remove the driver.
4. Run Autoinst.exe from this driver package and follow on-screen
instructions. Please ignore any Found New Hardware Wizard
windows which may appear.

note: if the previous driver was not installed using auto install, it
has to be removed using infclear.exe before running autoinst.exe

B. Windows 2000/XP when the current driver was not installed using
auto installation

1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. Ignore any Found New Hardware windows. Run autoinst.exe and
follow on-screen instructions.

C. Windows 2000/XP without auto installation
1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. After system restart, the Found New Hardware Wizard window will
show up. Follow the installation instruction in the manual as if
you are installing a new device.

note: "The search for the best driver in these location" step should
point to the downloaded installation file directory.

If you experience problems restarting Windows after installing new
update, try to change the PCI slot of the ESP/MAYA1010.

INSTALLATION
======================================================================

Upgrading from a previous version
======================================================================

Before removing the previous version, stop and close all applications
that are using the 1010 driver.

A. Windows 2000/XP when the current driver is installed using auto
installation (Autoinst.exe; auto installation is not supported
under Windows 98SE/ME)

This installation process is based on the Windows XP system.
Installation on other systems is similar. However, if you experience
any difficulties please contact Audiotrak technical support.

1. Click Start > Control Panel.
2. In the Control Panel window, double-click Add or Remove
Programs.
3. Select 1010 Audio Driver VX.XX and remove the driver.
4. Run Autoinst.exe from this driver package and follow on-screen
instructions. Please ignore any Found New Hardware Wizard
windows which may appear.

note: if the previous driver was not installed using auto install, it
has to be removed using infclear.exe before running autoinst.exe

B. Windows 2000/XP when the current driver was not installed using
auto installation

1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. Ignore any Found New Hardware windows. Run autoinst.exe and
follow on-screen instructions.

C. Windows 2000/XP without auto installation
1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. After system restart, the Found New Hardware Wizard window will
show up. Follow the installation instruction in the manual as if
you are installing a new device.

note: "The search for the best driver in these location" step should
point to the downloaded installation file directory.

If you experience problems restarting Windows after installing new
update, try to change the PCI slot of the ESP/MAYA1010.

INSTALLATION
======================================================================

Upgrading from a previous version
======================================================================

Before removing the previous version, stop and close all applications
that are using the 1010 driver.

A. Windows 2000/XP when the current driver is installed using auto
installation (Autoinst.exe; auto installation is not supported
under Windows 98SE/ME)

This installation process is based on the Windows XP system.
Installation on other systems is similar. However, if you experience
any difficulties please contact Audiotrak technical support.

1. Click Start > Control Panel.
2. In the Control Panel window, double-click Add or Remove
Programs.
3. Select 1010 Audio Driver VX.XX and remove the driver.
4. Run Autoinst.exe from this driver package and follow on-screen
instructions. Please ignore any Found New Hardware Wizard
windows which may appear.

note: if the previous driver was not installed using auto install, it
has to be removed using infclear.exe before running autoinst.exe

B. Windows 2000/XP when the current driver was not installed using
auto installation

1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. Ignore any Found New Hardware windows. Run autoinst.exe and
follow on-screen instructions.

C. Windows 2000/XP without auto installation
1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. After system restart, the Found New Hardware Wizard window will
show up. Follow the installation instruction in the manual as if
you are installing a new device.

note: "The search for the best driver in these location" step should
point to the downloaded installation file directory.

If you experience problems restarting Windows after installing new
update, try to change the PCI slot of the ESP/MAYA1010.

INSTALLATION
======================================================================

Upgrading from a previous version
======================================================================

Before removing the previous version, stop and close all applications
that are using the 1010 driver.

A. Windows 2000/XP when the current driver is installed using auto
installation (Autoinst.exe; auto installation is not supported
under Windows 98SE/ME)

This installation process is based on the Windows XP system.
Installation on other systems is similar. However, if you experience
any difficulties please contact Audiotrak technical support.

1. Click Start > Control Panel.
2. In the Control Panel window, double-click Add or Remove
Programs.
3. Select 1010 Audio Driver VX.XX and remove the driver.
4. Run Autoinst.exe from this driver package and follow on-screen
instructions. Please ignore any Found New Hardware Wizard
windows which may appear.

note: if the previous driver was not installed using auto install, it
has to be removed using infclear.exe before running autoinst.exe

B. Windows 2000/XP when the current driver was not installed using
auto installation

1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. Ignore any Found New Hardware windows. Run autoinst.exe and
follow on-screen instructions.

C. Windows 2000/XP without auto installation
1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. After system restart, the Found New Hardware Wizard window will
show up. Follow the installation instruction in the manual as if
you are installing a new device.

note: "The search for the best driver in these location" step should
point to the downloaded installation file directory.

If you experience problems restarting Windows after installing new
update, try to change the PCI slot of the ESP/MAYA1010.

INSTALLATION
======================================================================

Upgrading from a previous version
======================================================================

Before removing the previous version, stop and close all applications
that are using the 1010 driver.

A. Windows 2000/XP when the current driver is installed using auto
installation (Autoinst.exe; auto installation is not supported
under Windows 98SE/ME)

This installation process is based on the Windows XP system.
Installation on other systems is similar. However, if you experience
any difficulties please contact Audiotrak technical support.

1. Click Start > Control Panel.
2. In the Control Panel window, double-click Add or Remove
Programs.
3. Select 1010 Audio Driver VX.XX and remove the driver.
4. Run Autoinst.exe from this driver package and follow on-screen
instructions. Please ignore any Found New Hardware Wizard
windows which may appear.

note: if the previous driver was not installed using auto install, it
has to be removed using infclear.exe before running autoinst.exe

B. Windows 2000/XP when the current driver was not installed using
auto installation

1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. Ignore any Found New Hardware windows. Run autoinst.exe and
follow on-screen instructions.

C. Windows 2000/XP without auto installation
1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. After system restart, the Found New Hardware Wizard window will
show up. Follow the installation instruction in the manual as if
you are installing a new device.

note: "The search for the best driver in these location" step should
point to the downloaded installation file directory.

If you experience problems restarting Windows after installing new
update, try to change the PCI slot of the ESP/MAYA1010.

INSTALLATION
======================================================================

Upgrading from a previous version
======================================================================

Before removing the previous version, stop and close all applications
that are using the 1010 driver.

A. Windows 2000/XP when the current driver is installed using auto
installation (Autoinst.exe; auto installation is not supported
under Windows 98SE/ME)

This installation process is based on the Windows XP system.
Installation on other systems is similar. However, if you experience
any difficulties please contact Audiotrak technical support.

1. Click Start > Control Panel.
2. In the Control Panel window, double-click Add or Remove
Programs.
3. Select 1010 Audio Driver VX.XX and remove the driver.
4. Run Autoinst.exe from this driver package and follow on-screen
instructions. Please ignore any Found New Hardware Wizard
windows which may appear.

note: if the previous driver was not installed using auto install, it
has to be removed using infclear.exe before running autoinst.exe

B. Windows 2000/XP when the current driver was not installed using
auto installation

1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. Ignore any Found New Hardware windows. Run autoinst.exe and
follow on-screen instructions.

C. Windows 2000/XP without auto installation
1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. After system restart, the Found New Hardware Wizard window will
show up. Follow the installation instruction in the manual as if
you are installing a new device.

note: "The search for the best driver in these location" step should
point to the downloaded installation file directory.

If you experience problems restarting Windows after installing new
update, try to change the PCI slot of the ESP/MAYA1010.

INSTALLATION
======================================================================

Upgrading from a previous version
======================================================================

Before removing the previous version, stop and close all applications
that are using the 1010 driver.

A. Windows 2000/XP when the current driver is installed using auto
installation (Autoinst.exe; auto installation is not supported
under Windows 98SE/ME)

This installation process is based on the Windows XP system.
Installation on other systems is similar. However, if you experience
any difficulties please contact Audiotrak technical support.

1. Click Start > Control Panel.
2. In the Control Panel window, double-click Add or Remove
Programs.
3. Select 1010 Audio Driver VX.XX and remove the driver.
4. Run Autoinst.exe from this driver package and follow on-screen
instructions. Please ignore any Found New Hardware Wizard
windows which may appear.

note: if the previous driver was not installed using auto install, it
has to be removed using infclear.exe before running autoinst.exe

B. Windows 2000/XP when the current driver was not installed using
auto installation

1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. Ignore any Found New Hardware windows. Run autoinst.exe and
follow on-screen instructions.

C. Windows 2000/XP without auto installation
1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. After system restart, the Found New Hardware Wizard window will
show up. Follow the installation instruction in the manual as if
you are installing a new device.

note: "The search for the best driver in these location" step should
point to the downloaded installation file directory.

If you experience problems restarting Windows after installing new
update, try to change the PCI slot of the ESP/MAYA1010.

INSTALLATION
======================================================================

Upgrading from a previous version
======================================================================

Before removing the previous version, stop and close all applications
that are using the 1010 driver.

A. Windows 2000/XP when the current driver is installed using auto
installation (Autoinst.exe; auto installation is not supported
under Windows 98SE/ME)

This installation process is based on the Windows XP system.
Installation on other systems is similar. However, if you experience
any difficulties please contact Audiotrak technical support.

1. Click Start > Control Panel.
2. In the Control Panel window, double-click Add or Remove
Programs.
3. Select 1010 Audio Driver VX.XX and remove the driver.
4. Run Autoinst.exe from this driver package and follow on-screen
instructions. Please ignore any Found New Hardware Wizard
windows which may appear.

note: if the previous driver was not installed using auto install, it
has to be removed using infclear.exe before running autoinst.exe

B. Windows 2000/XP when the current driver was not installed using
auto installation

1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. Ignore any Found New Hardware windows. Run autoinst.exe and
follow on-screen instructions.

C. Windows 2000/XP without auto installation
1. Run INFCLEAR.EXE.
2. Click Remove Driver.
3. Click OK.
4. On the System Properties Window, click Hardware > Device Manager
> Sound, video and game controllers. Then, check the Device
Manager to ensure 1010 drivers are removed.
5. Click Restart and click OK to restart the computer.
6. After system restart, the Found New Hardware Wizard window will
show up. Follow the installation instruction in the manual as if
you are installing a new device.

note: "The search for the best driver in these location" step should
point to the downloaded installation file directory.

If you experience problems restarting Windows after installing new
update, try to change the PCI slot of the ESP/MAYA1010.

Unified driver and control panel

Index
1. Introduction 2
2. What’s in the Box 2
3. Key Features 3
4. System Requirements 4
5. Exterior Features 5
1. Breakout Box 5
2. PCI Card 5
3. I/O Cable 6
6. Hardware Installation 7
1. Preparation for hardware installation 7
2. Installing the MAYA1010 PCI card 8
7. Software Installation 9
8. MAYA1010 Panel 13
1. File 13
2. Config 14
3. Mapper 14
4. DirectWIRE 3.0 15
5. Control Panel 15
6. Mixer Panel 17
9. Configuring MAYA 1010 18
1. Windows Multimedia Setup 18
2. 5.1 Surround Sound for DVD Player Applications 18
3. ASIO 2.0 Applications 19
4. Sonar 20
5. Cakewalk 20
6. Sound Forge 20
10. DirectWIRE 3.0 22
1. What is DirectWIRE? 22
2. DirectWIRE Panel 22
3. DirectWIRE Examples 23
11. Circuit Diagram of MAYA1010 26
12. Specifications 27
13. Warranty 29