Aztech WaverIder Platinum-3D PnP Download Treibers

AZTECH WaveRider Platinum-3D version 1.10
This file contains additional information and changes about the product
that was not available at printing time.
Playing DOS Games after Shutdown/Restart to Win95 DOS Mode
==========================================================

The default configuration does not support playing DOS Games in Win95
MS-DOS mode. It can only support playing games in Win95 MS-DOS Prompt Box
(DOS Shell).

An utility (DOSMODE.EXE) was included in the installed {\WAVRIDER\DOSMODE}
directory which run a DOS Configuration Utility (AZTPNP.EXE) in the system's
startup files (AUTOEXEC.BAT and DOSSTART.BAT) for configuring the card when
restarting in MS-DOS mode to play DOS games.

However, as default settings used in configuring the card under DOS mode
may differ from the actual settings used by Win95, this may resulted in
resource conflict in some cases. Please check the settings used by the
sound card under Win95 against the default settings recorded in AZTPNP.CFG
file in {\WAVRIDER\DOSMODE} directory prior to running the (DOSMODE.EXE)
DOS utility.

NOTE : IF YOU HAD ALREADY RAN THE DOSMODE.EXE UTILITY AND DECIDED TO MADE
MODIFICATIONS TO THE DOS DEFAULT SETTING. THE AZTPNP.CFG IS NOW
LOCATED IN THE ROOT DIRECTORY {C:\} AND NOT IN {WAVRIDER\DOSMODE}
DIRECTORY.

To determine the identical settings used in Win95 as well as in MS-DOS
mode, first go to "CONTROL PANEL" menu, double click on the "SYSTEM"
applet. You should then refer to the "RESOURCES" tab in Win95's "DEVICE
MANAGER".

The Audio device entry under "Sound, Video and Games Controllers settings"
section is usually named as "Audio Device (AZT1023)".
The following are the settings normally used :-

--->Input/Output Range 0220 - 022F ** Sound Blaster I/O Address **
Input/Output Range 0388 - 038F
Input/Output Range 0534 - 0537
--->Interrupt 05 ** Sound Blaster IRQ **
Direct Memory Access 01
--->Direct Memory Access 03 or 00 (depend on system),
** SB DMA used under DOS Box **

Likewise, for the MPU-401 Device, Gameport and Joystick Device.


Ensure that all the settings (SB I/O,IRQ and DMAs) displayed above matches
the settings recorded in the default file (AZTPNP.CFG - listed below) in
order for the proper operation of the card under MS-DOS mode.

CONTENTS
1. -- Features
2. -- Limitations
3. -- Installation of Audio Driver for Windows NT 4.00