Avocent Serial Card Drivers Télécharger Pilotes
Disponibles 6 fichiers pour Serial Card Drivers
Constructeur
Avocent
Catégorie
Autres accessoires
Modèle
Avocent Serial Card Drivers
Description
Drivers
Système d'exploitation
Windows 2000
Taille
85Kb
Nom de fichier
pci20x_win2000_v20.00f.exe
Informations
PCI IO Windows 2000 Installation
This is an installation procedure for models with more than one port. Windows comes with driver for models with one port.
Models with more than one port are CyberParallel Dual, CyberSerial Dual, Cyber I/O, etc.
1) Shut down the system. Insert the card into one of the available PCI slots.
2) Start the system. Windows should detect the card as a Simple Communicationand start Found New Hardware Wizard.
3) Click Next to continue.
4) Select Search for a suitable driver for my device (recommended) and click Next.
5) Select Specify a location, de-select the other options, and click Next.
8) Insert the disk, and type A:\win2K in the box, and click OK.
9) Click Next and Finish to complete driver installation.
To Update the Driver (Card Already Installed in the System)
1) Go My Computer, Control Panel, System, Hardware, Device Manager.
2) Double-click on PCI...Card under Multifunction adapters, that has a yellow exclamation mark.
3) Click Reinstall Driver.
4) Windows starts Upgrade Device Driver Wizard.
5) Click Next to continue.
6) Select Search for a suitable driver for my device (recommended) and click Next.
7) Select Specify a location, de-select the other options, and click Next.
8) Insert the disk, and type A:\win2K in the box, and click OK.
9) Click Finish and Close to complete driver update.
Verify for Sucessful Installation
1) Go My Computer, Control Panel, System, Hardware, Device Manager.
2) Click on the + (plus sign) in front of Multifunction adapters.
3) You should have SIIG...PCI Board listed.
4) Click on the + (plus sign) in front of Ports (Com & LPT).
5) You should have two or more Cyber... ports listed.
This is an installation procedure for models with more than one port. Windows comes with driver for models with one port.
Models with more than one port are CyberParallel Dual, CyberSerial Dual, Cyber I/O, etc.
1) Shut down the system. Insert the card into one of the available PCI slots.
2) Start the system. Windows should detect the card as a Simple Communicationand start Found New Hardware Wizard.
3) Click Next to continue.
4) Select Search for a suitable driver for my device (recommended) and click Next.
5) Select Specify a location, de-select the other options, and click Next.
8) Insert the disk, and type A:\win2K in the box, and click OK.
9) Click Next and Finish to complete driver installation.
To Update the Driver (Card Already Installed in the System)
1) Go My Computer, Control Panel, System, Hardware, Device Manager.
2) Double-click on PCI...Card under Multifunction adapters, that has a yellow exclamation mark.
3) Click Reinstall Driver.
4) Windows starts Upgrade Device Driver Wizard.
5) Click Next to continue.
6) Select Search for a suitable driver for my device (recommended) and click Next.
7) Select Specify a location, de-select the other options, and click Next.
8) Insert the disk, and type A:\win2K in the box, and click OK.
9) Click Finish and Close to complete driver update.
Verify for Sucessful Installation
1) Go My Computer, Control Panel, System, Hardware, Device Manager.
2) Click on the + (plus sign) in front of Multifunction adapters.
3) You should have SIIG...PCI Board listed.
4) Click on the + (plus sign) in front of Ports (Com & LPT).
5) You should have two or more Cyber... ports listed.
Constructeur
Avocent
Catégorie
Autres accessoires
Modèle
Avocent Serial Card Drivers
Description
Drivers
Système d'exploitation
Windows 95
Taille
97Kb
Nom de fichier
pci20x_win95_v20.00f.exe
Constructeur
Avocent
Catégorie
Autres accessoires
Modèle
Avocent Serial Card Drivers
Description
Drivers
Système d'exploitation
Windows 98
Taille
97Kb
Nom de fichier
pci20x_win98_v20.00f.exe
Constructeur
Avocent
Catégorie
Autres accessoires
Modèle
Avocent Serial Card Drivers
Description
Drivers
Système d'exploitation
Windows Me
Taille
97Kb
Nom de fichier
pci20x_winme_v20.00f.exe
Constructeur
Avocent
Catégorie
Autres accessoires
Modèle
Avocent Serial Card Drivers
Description
Drivers
Système d'exploitation
Windows NT4
Taille
620Kb
Nom de fichier
pci20x_nt4_v20.00f.exe
Constructeur
Avocent
Catégorie
Autres accessoires
Modèle
Avocent Serial Card Drivers
Description
Drivers
Système d'exploitation
Windows XP
Taille
85Kb
Nom de fichier
pci20x_winxp_v20.00f.exe
Informations
PCI IO Windows 2000 Installation
This is an installation procedure for models with more than one port. Windows comes with driver for models with one port.
Models with more than one port are CyberParallel Dual, CyberSerial Dual, Cyber I/O, etc.
1) Shut down the system. Insert the card into one of the available PCI slots.
2) Start the system. Windows should detect the card as a Simple Communicationand start Found New Hardware Wizard.
3) Click Next to continue.
4) Select Search for a suitable driver for my device (recommended) and click Next.
5) Select Specify a location, de-select the other options, and click Next.
8) Insert the disk, and type A:\win2K in the box, and click OK.
9) Click Next and Finish to complete driver installation.
To Update the Driver (Card Already Installed in the System)
1) Go My Computer, Control Panel, System, Hardware, Device Manager.
2) Double-click on PCI...Card under Multifunction adapters, that has a yellow exclamation mark.
3) Click Reinstall Driver.
4) Windows starts Upgrade Device Driver Wizard.
5) Click Next to continue.
6) Select Search for a suitable driver for my device (recommended) and click Next.
7) Select Specify a location, de-select the other options, and click Next.
8) Insert the disk, and type A:\win2K in the box, and click OK.
9) Click Finish and Close to complete driver update.
Verify for Sucessful Installation
1) Go My Computer, Control Panel, System, Hardware, Device Manager.
2) Click on the + (plus sign) in front of Multifunction adapters.
3) You should have SIIG...PCI Board listed.
4) Click on the + (plus sign) in front of Ports (Com & LPT).
5) You should have two or more Cyber... ports listed.
This is an installation procedure for models with more than one port. Windows comes with driver for models with one port.
Models with more than one port are CyberParallel Dual, CyberSerial Dual, Cyber I/O, etc.
1) Shut down the system. Insert the card into one of the available PCI slots.
2) Start the system. Windows should detect the card as a Simple Communicationand start Found New Hardware Wizard.
3) Click Next to continue.
4) Select Search for a suitable driver for my device (recommended) and click Next.
5) Select Specify a location, de-select the other options, and click Next.
8) Insert the disk, and type A:\win2K in the box, and click OK.
9) Click Next and Finish to complete driver installation.
To Update the Driver (Card Already Installed in the System)
1) Go My Computer, Control Panel, System, Hardware, Device Manager.
2) Double-click on PCI...Card under Multifunction adapters, that has a yellow exclamation mark.
3) Click Reinstall Driver.
4) Windows starts Upgrade Device Driver Wizard.
5) Click Next to continue.
6) Select Search for a suitable driver for my device (recommended) and click Next.
7) Select Specify a location, de-select the other options, and click Next.
8) Insert the disk, and type A:\win2K in the box, and click OK.
9) Click Finish and Close to complete driver update.
Verify for Sucessful Installation
1) Go My Computer, Control Panel, System, Hardware, Device Manager.
2) Click on the + (plus sign) in front of Multifunction adapters.
3) You should have SIIG...PCI Board listed.
4) Click on the + (plus sign) in front of Ports (Com & LPT).
5) You should have two or more Cyber... ports listed.
