Acorp BSW Télécharger Pilotes

Requirements
------------

- Windows 95
- PC with a Pentium, Pentium II, or Pentium Pro Processor and a free
AGP/PCI slot
- 16MB of RAM

Fresh Installation
------------------

NOTE: Complete Steps 1 and 2 before removing your existing 2D card.

1) Extract the files for the Voodoo Banshee driver to a directory.
2) Before removing your existing 2D card switch the video driver to
Standard VGA. Click Start, Control Panel. Double-click on Display.

Select 640X480 and 16 colors. Accept the changes.

3) Power off the system and remove your existing 2D card.
4) Install the Voodoo Banshee Card in a free AGP/PCI Slot
5) Power on the system and verify that video appears during post.
6) Start Windows in Normal mode

(Once Windows starts you may be notified that no video device
exists, click Cancel if this message appears)

7) Windows will detect a new VGA Compatible Display. You need to:

Windows 95 Standard Release users: Select "Use Driver from Mfr"
and click OK. Point to the Win95
directory in the driver
location then click OK again.
Windows 95 OEM SR2 users: Click the Next Button on the
Detection Dialog Box. When notified
that the drivers are not found click
"Other Locations" then enter the path
to the Win95 directory in the driver
location.

8) You may then be prompted to insert the Windows 95 Voodoo Banshee Driver Disk.
Again, enter the path you specified in Step 1 and press OK.
9) Windows will copy the drivers. Reboot the system when prompted
10) Install DirectX 6.0.

Requirements
------------

- Windows 95
- PC with a Pentium, Pentium II, or Pentium Pro Processor and a free
AGP/PCI slot
- 16MB of RAM

Fresh Installation
------------------

NOTE: Complete Steps 1 and 2 before removing your existing 2D card.

1) Extract the files for the Voodoo Banshee driver to a directory.
2) Before removing your existing 2D card switch the video driver to
Standard VGA. Click Start, Control Panel. Double-click on Display.

Select 640X480 and 16 colors. Accept the changes.

3) Power off the system and remove your existing 2D card.
4) Install the Voodoo Banshee Card in a free AGP/PCI Slot
5) Power on the system and verify that video appears during post.
6) Start Windows in Normal mode

(Once Windows starts you may be notified that no video device
exists, click Cancel if this message appears)

7) Windows will detect a new VGA Compatible Display. You need to:

Windows 95 Standard Release users: Select "Use Driver from Mfr"
and click OK. Point to the Win95
directory in the driver
location then click OK again.
Windows 95 OEM SR2 users: Click the Next Button on the
Detection Dialog Box. When notified
that the drivers are not found click
"Other Locations" then enter the path
to the Win95 directory in the driver
location.

8) You may then be prompted to insert the Windows 95 Voodoo Banshee Driver Disk.
Again, enter the path you specified in Step 1 and press OK.
9) Windows will copy the drivers. Reboot the system when prompted
10) Install DirectX 6.0.

Requirements
------------
- Windows NT 4.0 or higher
- PC with a Pentium II, Pentium Pro, Pentium or similar processor
- 16MB of RAM or more Suggested
Fresh Installation / Upgrade Existing Drivers
---------------------------------------------

NOTE: For Fresh Installations, complete Steps 1 - 9 before removing
your existing 2D card. If existing Voodoo Banshee drivers are being updated,
installation is complete once step 9 is done.

1) Extract the files for the Voodoo Banshee driver to a directory.
2) Log-in to Windows NT as Administrator.
3) Click Start, Contol Panel. Double-click on Display.
4) Click the settings tab then click "Change"
6) Click "Have Disk" and enter the path to the extracted drivers.
7) When asked to choose a device, select "Voodoo Banshee"
8) You may then be prompted to insert the Windows NT Voodoo Banshee Driver Disk.
Enter the path to the drivers again.
9) Windows NT will copy the drivers.

Steps 10-13 are only used during a fresh installation

10) Power off the system and remove your existing 2D card.
11) Install the Voodoo Banshee Card in a free PCI/AGP Slot
12) Power on the system and verify that video appears during post
13) Start Windows NT. If problems occur, revert to "Last Known Good"
from within the Windows NT startup options.