Asus AGP-V3000ZX Télécharger Pilotes

ASUS V3000 Series V2.05 Readme File for Windows NT 4.0 (7/10/1998)
=======================================================================

IMPORTANT for AGP-V3000/AGP-V3000ZX Users:
Before Installing, make sure you have installed
NT 4.0 Service Pack 3.0, otherwise NT 4.0 will
hang up when reboot again.

After installing your graphics card, Windows NT 4.0 will default to the
standard VGA mode (640 x 480, 16 colors). The procedure below describes
how to install ASUS AGP-V3000 display drivers for Windows NT 4.0.

Installing ASUS V3000 Series display drivers for Windows NT 4.0:
-------------------------------------------------------------
1. Start up Windows NT in VGA mode.
2. Run the Windows NT Display program located in the Control Panel, under
"Settings" in the Start menu or right click the mouse button on the
desktop and select "Properties" from the popup menu.
3. Select the "Settings" tab.
4. Select "Display Type...".
5. Select "Change..." from the display options.
6. Select "Have Disk..."
7. NT will prompt you for the correct path, enter the path of the driver
such as D:\NT40 (assuming your CD-ROM drive is letter D)
8. A list of ASUS V3000 video adapters will be displayed. Select the
one you are using, then click on the "OK" button.
9. Windows NT will once again prompt for confirmation.
All appropriate files are then copied to the hard disk.
10. Select "Apply" in Control Panel. Restart Windows NT. Windows NT will
start up using the ASUS V3000 drivers.
11. NT will boot into a default mode and start the Display applet allowing
for mode selection.