Axper XP-K7V600 Télécharger Pilotes, Manuel et BIOS
Disponibles 7 fichiers pour XP-K7V600
Constructeur
Axper
Catégorie
Cartes mères
Modèle
Axper XP-K7V600
Description
BIOS Update
Système d'exploitation
BIOS Update
Version BIOS
F1
Taille
403Kb
Nom de fichier
bios_xpk7v600_f1.exe
Constructeur
Axper
Catégorie
Cartes mères
Modèle
Axper XP-K7V600
Description
Manual
Système d'exploitation
Manual
Version Manual
1001
Taille
3.4Mb
Nom de fichier
xp-k7v600_1001.pdf
Informations
Contents
Motherboard Layout ......................................................................... 4
1. Product Introduction .................................................................. 5
1.1. Feature Summary ............................................................................. 5
1.2. I/O Back Panel and Connectors & Jumper Setting ......................... 6
1.2.1. I/O Back Panel ....................................................................................... 6
1.2.2. Connectors & Jumper Setting .............................................................. 6
2. Hardware Installation ............................................................... 10
2.1. Installation of a Socket A CPU and Fan Sink.................................. 10
2.2. Installation of Memory..................................................................... 11
2.3. Installation of the Graphics Card ................................................... 11
3. BIOS Setup ............................................................................ 13
3.1. Setup Screen Features (BIOS version:E2) .................................... 13
3.2. Standard CMOS Features .............................................................. 14
3.3. Advanced BIOS Features ............................................................... 16
3.4. Integrated Peripherals .................................................................... 17
3.5. Power Management Setup ............................................................ 19
3.6. PnP/PCI Configuration ................................................................... 20
3.7. PC Health Status ............................................................................ 21
3.8. Frequency/Voltage Control ............................................................. 22
3.9. Load Fail-Safe Defaults ................................................................. 24
3.10. Load Optimized Defaults................................................................ 24
3.11. Set Supervisor/User Password ..................................................... 24
3.12. Save & Exit Setup ............................................................................ 24
3.13. Exit Without Saving.......................................................................... 24
4. Driver Installation ..................................................................... 25
5. Installation of SATA RAID Disks ............................................... 27
5.1. Configuring the System BIOS for the SATA Channel ..................... 27
5.2. Creating RAID 0 .............................................................................. 29
5.3. Creating RAID 1 .............................................................................. 33
5.4. Deleting RAID Array......................................................................... 37
5.5. Selecting Boot Array ........................................................................ 38
5.6. Viewing Serial Number .................................................................. 38
5.7. Making the SATA RAID Driver Disk ................................................. 39
5.8. Loading the VIA 8237 Serial ATA Driver ........................................... 39
Motherboard Layout ......................................................................... 4
1. Product Introduction .................................................................. 5
1.1. Feature Summary ............................................................................. 5
1.2. I/O Back Panel and Connectors & Jumper Setting ......................... 6
1.2.1. I/O Back Panel ....................................................................................... 6
1.2.2. Connectors & Jumper Setting .............................................................. 6
2. Hardware Installation ............................................................... 10
2.1. Installation of a Socket A CPU and Fan Sink.................................. 10
2.2. Installation of Memory..................................................................... 11
2.3. Installation of the Graphics Card ................................................... 11
3. BIOS Setup ............................................................................ 13
3.1. Setup Screen Features (BIOS version:E2) .................................... 13
3.2. Standard CMOS Features .............................................................. 14
3.3. Advanced BIOS Features ............................................................... 16
3.4. Integrated Peripherals .................................................................... 17
3.5. Power Management Setup ............................................................ 19
3.6. PnP/PCI Configuration ................................................................... 20
3.7. PC Health Status ............................................................................ 21
3.8. Frequency/Voltage Control ............................................................. 22
3.9. Load Fail-Safe Defaults ................................................................. 24
3.10. Load Optimized Defaults................................................................ 24
3.11. Set Supervisor/User Password ..................................................... 24
3.12. Save & Exit Setup ............................................................................ 24
3.13. Exit Without Saving.......................................................................... 24
4. Driver Installation ..................................................................... 25
5. Installation of SATA RAID Disks ............................................... 27
5.1. Configuring the System BIOS for the SATA Channel ..................... 27
5.2. Creating RAID 0 .............................................................................. 29
5.3. Creating RAID 1 .............................................................................. 33
5.4. Deleting RAID Array......................................................................... 37
5.5. Selecting Boot Array ........................................................................ 38
5.6. Viewing Serial Number .................................................................. 38
5.7. Making the SATA RAID Driver Disk ................................................. 39
5.8. Loading the VIA 8237 Serial ATA Driver ........................................... 39
Constructeur
Axper
Catégorie
Cartes mères
Modèle
Axper XP-K7V600
Description
SATA RAID Driver
Système d'exploitation
Windows 98-Me-NT-2000-XP
Version Driver
XP=5.1.2600.100 2000=5.0.2195.100 98-Me=2.0.950.100 NT=4.0.1381.100
Taille
5.8Mb
Nom de fichier
driver_raid_via_8237.exe
Informations
CONTENTS
======================
1) System Requirements
2) Package Version Identification
3) BIOS Verision
4) Software Package Contents
5) Install Drivers and Utility
6) Insatll Operating System into HDD of VT6420
7) Install Operating System into SATA HDD of VT8237
8) Notes
======================
1) System Requirements
2) Package Version Identification
3) BIOS Verision
4) Software Package Contents
5) Install Drivers and Utility
6) Insatll Operating System into HDD of VT6420
7) Install Operating System into SATA HDD of VT8237
8) Notes
Constructeur
Axper
Catégorie
Cartes mères
Modèle
Axper XP-K7V600
Description
USB2.0 Driver
Système d'exploitation
Windows 9x-Me-2000-NT
Version Driver
9X-Me=4.90.3000.7 2000=5.0.2195.5652
Taille
13Mb
Nom de fichier
driver_usb20_via_8235.exe
Informations
Contents
1.0 Driver Package Description 1
2.0 System Requirement 1
3.0 Driver Limitations 2
4.0 Driver Installation for Windows XP 3
5.0 Driver Installation for Windows 2000 6
6.0 Driver Installation for Windows ME/98SE/98 16
1.0 Driver Package Description 1
2.0 System Requirement 1
3.0 Driver Limitations 2
4.0 Driver Installation for Windows XP 3
5.0 Driver Installation for Windows 2000 6
6.0 Driver Installation for Windows ME/98SE/98 16
Constructeur
Axper
Catégorie
Cartes mères
Modèle
Axper XP-K7V600
Description
Chipset Driver
Système d'exploitation
Windows 9x-Me-2000-XP-NT
Version Driver
4.51
Taille
2.6Mb
Nom de fichier
driver_chipset_via_4in1.exe
Constructeur
Axper
Catégorie
Cartes mères
Modèle
Axper XP-K7V600
Description
LAN Driver
Système d'exploitation
Windows 9x-Me-2000-XP-NT
Version Driver
3.22.0.0407
Taille
833Kb
Nom de fichier
driver_lan_via_8237.exe
Informations
Contents of the Subdirectory:
=============================
FETND4.SYS The NDIS4 driver for Windows NT.
FETNDH.HLP The help file.
NTUTIL.DLL The user configuration library.
OEMSETUP.INF The setup information file.
WINNT.TXT This file.
Installation:
=============
Before starting with the installation process, make sure that the adapter
is properly installed and configured.
1. Open "Control Panel" -> "Networks", and choose the "Add Adapter" button.
The Add Noetwork Adapter dialog box appears. Select " Requires
disk from manufacturer" in the list of Network Adapters, and then press
.
2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) if necessary.
3. Select the correct Adapter, and start to copy the driver files to your
system.
4. After all the driver files have been copied to your system, a property
dialog box appears in the screen. You can enable the special properties
if you want to.
5. When the driver installation is completed, restart your PC.
=============================
FETND4.SYS The NDIS4 driver for Windows NT.
FETNDH.HLP The help file.
NTUTIL.DLL The user configuration library.
OEMSETUP.INF The setup information file.
WINNT.TXT This file.
Installation:
=============
Before starting with the installation process, make sure that the adapter
is properly installed and configured.
1. Open "Control Panel" -> "Networks", and choose the "Add Adapter" button.
The Add Noetwork Adapter dialog box appears. Select "
disk from manufacturer" in the list of Network Adapters, and then press
2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) if necessary.
3. Select the correct Adapter, and start to copy the driver files to your
system.
4. After all the driver files have been copied to your system, a property
dialog box appears in the screen. You can enable the special properties
if you want to.
5. When the driver installation is completed, restart your PC.
Constructeur
Axper
Catégorie
Cartes mères
Modèle
Axper XP-K7V600
Description
Audio Driver
Système d'exploitation
Windows 9x-Me-2000-XP-NT
Version Driver
3.62
Taille
19.8Mb
Nom de fichier
driver_audio_realtek_whql.exe
Informations
Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:
=================================================================================
<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>
---------------------------------------
Setup Driver/Application at first time:
---------------------------------------
Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.
Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.
Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.
Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.
The system will reload the drivers and do some adjustments in the INF
file if so required.
--------------------------
Update Driver/Application:
--------------------------
Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.
--------------------------
Remove Driver/Application:
--------------------------
Step 1. Go to Start\Settings\Control Panel.
Step 2. Select [Add/Remove Programs] icon.
Step 3. Select "Realtek AC'97 Drivers and Applications" and press [Change/Remove]
button.
Step 4. Click on [Next/OK/Go] to finish the uninstallation.
Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
<<< For WinNT 4.0 (NT4 driver) >>>
---------------------------------------
Setup Driver/Application at first time:
---------------------------------------
Ignore Step 1, and follow the same procedure in Win2000/WinME/WinXP.
--------------------------
Update Driver/Application:
--------------------------
The same procedure in Win2000/WinME/WinXP.
--------------------------
Remove Driver/Application:
--------------------------
The same procedure in Win2000/WinME/WinXP.
=================================================================================
<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>
---------------------------------------
Setup Driver/Application at first time:
---------------------------------------
Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.
Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.
Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.
Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.
The system will reload the drivers and do some adjustments in the INF
file if so required.
--------------------------
Update Driver/Application:
--------------------------
Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.
--------------------------
Remove Driver/Application:
--------------------------
Step 1. Go to Start\Settings\Control Panel.
Step 2. Select [Add/Remove Programs] icon.
Step 3. Select "Realtek AC'97 Drivers and Applications" and press [Change/Remove]
button.
Step 4. Click on [Next/OK/Go] to finish the uninstallation.
Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
<<< For WinNT 4.0 (NT4 driver) >>>
---------------------------------------
Setup Driver/Application at first time:
---------------------------------------
Ignore Step 1, and follow the same procedure in Win2000/WinME/WinXP.
--------------------------
Update Driver/Application:
--------------------------
The same procedure in Win2000/WinME/WinXP.
--------------------------
Remove Driver/Application:
--------------------------
The same procedure in Win2000/WinME/WinXP.
