Amarina Carte Son 5.1 Télécharger Pilotes

INSTALL DRIVER
================================================================================

1. Before first time to run the driver, create module dependency by
'depmod -a'

2. To install the driver manually, enter 'modprobe cmpci'.

3. Driver installation for various distributions:

a. Slackware 4.0
Add the 'modprobe cmpci' command in your /etc/rc.d/rc.modules
file.so you can start the driver automatically each time booting.

b. Caldera OpenLinux 2.2
Use LISA to load the cmpci module.

c. RedHat 6.0 and S.u.S.E. 6.1
Add following command in /etc/conf.modules:

alias sound cmpci

also visit http://www.cmedia.com.tw for installation instruction.

DRIVER PARAMETER
================================================================================

Some functions for the cm8738 can be configured in Kernel Configuration
or modules parameters. Set these parameters to 1 to enable.

spdif_loop: Enable S/PDIF loop, this route S/PDIF-in to S/PDIF-out
directly.
four_ch: Enable 4 channels mode, rear-out or line-in will output
the same as line-out.
rear_out: Enable this if you have independent rear-out jacket on
your sound card, otherwise line-in will be used as
rear-out.
modem: You will need to set this parameter if you want to use
the HSP modem. You need install the pctel.o, the modem
driver itself.
joystich: Enable joystick. You will need to install Linux joystick
driver.

PCI audio NT4.0 Drivers Note
-------------------------------------------------

* For Windows NT 4.0 drivers installation
1. Press "Start" button.
2. Move highlight bar to "Settings" and select "Control Panel".
3. Double click on "Multimedia" icon.
4. Select "Devices" page.
5. Press "Add..." button.
6. Select item "Unlisted or Updated Driver" in "List of Drivers" list box.
7. Specfy path of PCI audio NT drivers.(ex: A:\NT)
8. The dialog show item that fit your audio device, please press "OK" button.
9. Choose proper I/O or "OK" button for default setting.
10. Please restat Windows NT system.

* How to remove installed drivers?
1. Press "Start" button.
2. Move highlight bar to "Settings" and select "Control Panel".
3. Double click on "Multimedia" icon.
4. Select "Devices" page.
5. Open "Audio Devices".
6. Select "Audio for C-Media PCI Devices" then press "Remove" button.
7. Press "Yes" button while system ask for confirming.
8. Shut down NT system and reboot.

Setup program options:
-------------------------

Phone Jacks: CMI8738 integrated in the motherboard or in a separate sound
card(you can consult your hardware manufacture for more details).(1)

8738 in motherboard(2)

** Line-in and rear speaker output share the same jack. (3)
** Line-in and Center/Subwoofer share the same jack. (4)
** Microphone and Subwoofer share the same jack. (5)

8738 in sound card: There are independent rear speaker output jacks (Center & Subwoofer for 6CH) in the sound card. (6)
Disable MIDI port(device): no MIDI port. (7)

Disable GAME port(device): no GAME port. (8)
Note: If you are not familiar with the hardware specifications, and are using a
pair of speakers, we suggest you select "2" and "3".


--------------------------
Installation Option Notes:
--------------------------

A. Phone Jacks:
Before the installation, please make sure whether you have
CMI8738 integrated in the motherboard, or in a separate sound card.
You can consult your hardware manufacturer for more details.

CMI8738 in motherboard: please select "2".

-- If your hardware supports 4-channel output(4 speakers), please
select "3".

-- If your hardware supports 6-channel output(6 speakers):

**If the output port has only 3 jacks, please select "3" and " 5".
**If the output port has 4 jacks, you got three options: "3", "4", or "5".

CMI8738 in the sound card(independent rear speaker output jacks available), please select "6".
B. MIDI port: if there is no MIDI port, please select "7".

C. GAME port: if there is no GAME port, please select "8".

** If you are not familiar with the hardware specifications, and are using a pair of speakers,
we suggest you select "2" and "3".

** When the installation is complete, please reboot your PC. Multi-channel
Audio Demo is provided for speaker setup test.