Asound Express PCI Card ASP001 ALS 300 Télécharger Pilotes

DOS and Windows 3.1 Installation for ALS300:
====================================================

[SETUP.EXE for Windows 3.1]

The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.

The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the APCONFIG.EXE is started to configure the board setting
after the Setup program is finished.

[DOSINST.EXE for DOS Only installation]

The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the APCONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.

Windows98(WDM) Driver & Application Installation/Removal Procedure For ALS300:
=================================================================================

First Time Driver/Application Installation:

Step 1. After installing the ALS300 sound card into the PCI slot of your
computer, turn on the system power. Windows 98 will prompt you with
a "New Hardware Found" dialog box. To install the Windows 98 driver,
please select "Driver from disk provided by hardware manufacturer"
option and click on [OK].

Step 2. Insert the "ALS300 Windows98 Driver and Utilities" CD-ROM/disk into the
appropriate drive and select that drive from the prompted dialog box and
click on [OK]. Windows 98 will copy all the needed files and set up all
the logic devices on the board automatically.

Step 3. Install the application(ALSRACK Player) by running the SETUP.EXE file
(included in the " Windows98 Drivers and Utilities" CD-ROM/disk) from
the Windows 98 START MENU|RUN. In selecting a setup type, please choose
"Install Application Only..." and click on [Next]. By doing so, setup
will install the bundled application into you computer system.

Note: See below for full description of ALSRACK functions.

Driver/Application Removal & Installation:

Step 1. To remove an existing driver/application and install with the latest
driver/application, please run SETUP.EXE file(inlcuded in the " Windows98
Drivers and Utilities" CD-ROM/disk) from the Windows 98 START MENU|RUN.

Step 2. In selecting a setup type, please choose "Remove and Install Software.."
and click on [Next]. When asked with "Do you want to install the bundled
application?" Select "Yes, I do." to install ALSRACK Player or "No, I
don't." if not. Click on [Next] and the program will install both the driver
and application automatically.

Note: If you have not installed the bundled application(ALSRACK Player) in step
#2 and wish to install later, you can run SETUP.EXE again and select "Install
Application Only.."
The DOS driver will installed autometically if you install driver by
running SETUP.EXE, and it will work when you shutdown your computer
by choosing restart to MS-DOS mode.
Driver/Application Removal ONLY:

Step 1. If you want to remove an existing driver/application ONLY, you may do so by
running SETUP.EXE file (inlcuded in the " Windows98 Drivers and Utilities"
CD-ROM/disk) from the Windows 98 START MENU|RUN.

Step 2. In selecting a setup type, please choose "Remove Software.." and click on
[Next]. The program will remove all existing and associated driver files
automatically.