Asound Gold ISA Card AS004-006 ALS100+ Télécharger Pilotes

5.00.2195.01
-The same functions as ALS120, but different strings.

Windows 98 installation procedure for ALS100+ WDM driver:
=====================================================

1. After user installs the ALS100+ sound card into the ISA slot in the computer
and powers on the system, Windows 98 will prompt user with a "New Hardware
Found" dialog box since the ALS100+ sound card is ISA plug and play. To
install the Windows 98 drivers, select "Driver from disk provided by
hardware manufacturer" and click on OK.

2. Insert the "ALS100+ Win 98 Drivers and Utilities" diskette into the
appropriate drive and select that drive from the prompted dialog box and
click on OK. Windows 98 will copy all the needed files and set up all the
logic devices on the board automatically.

3. Install the ALSRACK player by running the SETUP.EXE file (also provided on
the "ALS100+ Win 98 Drivers and Utilities" disk) from the Windows 98 Start
menu|Run. This will create the Avance Sound Program Group with the ALSRACK
utility icon. (See Appendix below for full descriptions of ALSRACK
functions).

Avance Logic ALS100+/120 Sound System
Software Installation and Setup
Version:ALS11.A0.60

Windows NT installation procedure for ALS100+/120:
1. Insert the "ALS100+/120 Windows NT Drivers and Utilities" diskette
into drive A:, and within CONTROL PANEL/DRIVERS/ADD/UNLISTED OR UPDATED
DRIVER, choose "OK". While installing, "Driver Exists" warning message
will appear and will ask to keep the old "midimap.cfg" or re-install.
Please choose re-install, or else midi will not function properly.

For Winnt4.0 installation procedure for ALS100+/120:

1. Insert the "ALS100+/120 Windows NT Drivers and Utilities" diskette
into drive A: or B:, and within CONTROL PANEL/MULTIMEDIA/DEVICE/ADD,
choose "OK". While installing, "Driver Exists" warning message will
appear and will ask to keep the old or re-install. Please choose
re-install, or else it will not funtion properly.

NOTE: If your joystick(analog) is not recognized by the system, please
follow the driver installation procedure as mentioned in readme except
that the driver source will be in your WinNT 4.0 CD-ROM under
\DRVLIB\MULTIMED\JOYSTICK\X86 when asked for. For digital game pad or joystick,
drivers are available from the list provide by your WinNT system.

Before you install ALS100/100+/120/200 Device Driver make sure that
you have installed OS/2 WARP Version 4.00 Revision 9.023 or later.
Enter "VER /R" from an OS/2 command prompt to verify.

This document describes the means for setting up your Sound Card for
proper operation under the OS/2 operating system environment. If you
already have OS/2 installed, please read PART 1; if not, please proceed
to PART 2 of this document. PART 3 describes the parameter options
for the Sound Card setup program ALSNDB.SYS.
PART 1 - OS/2 Already Installed (with Multimedia Software Support,
if not, Go to PART 2)

A.Installing the Sound Card device driver

PART 2 - OS/2 Not Installed
A. OS/2 Diskette Installation
B. OS/2 CD-ROM Installation (OS/2 Warp)
C. OS/2 Installed without Multimedia Support.

PART 3 - Options for ALSNDB.SYS Sound Card device driver