Avance Logic ALS100+ Télécharger Pilotes
Disponibles 9 fichiers pour ALS100+
Constructeur
Avance Logic
Catégorie
Cartes sons et Lecteurs MP3
Modèle
Avance Logic ALS100+
Description
Drivers
Système d'exploitation
MS-Dos Windows 3.1-95
Version Driver
A1.80
Taille
791Kb
Nom de fichier
w95_100p.exe
Constructeur
Avance Logic
Catégorie
Cartes sons et Lecteurs MP3
Modèle
Avance Logic ALS100+
Description
Drivers
Système d'exploitation
OS/2 4.0
Version Driver
A1.10
Taille
138Kb
Nom de fichier
os2_4_100p.exe
Constructeur
Avance Logic
Catégorie
Cartes sons et Lecteurs MP3
Modèle
Avance Logic ALS100+
Description
Drivers
Système d'exploitation
Windows 2000-XP
Version Driver
A1.10
Taille
43Kb
Nom de fichier
win2000.exe
Constructeur
Avance Logic
Catégorie
Cartes sons et Lecteurs MP3
Modèle
Avance Logic ALS100+
Description
Logical Device 0 Wave Audio Device
Système d'exploitation
Windows 95-98-98Se-Me
Version Driver
4.05.00.3000
Taille
706Kb
Nom de fichier
als120.zip
Informations
DOS and Windows 3.1 Installation for ALS100+/ALS120:
====================================================
[SETUP.EXE for Windows 3.1]
The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.
The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the A3CONFIG.EXE is started to configure the board setting
after the Setup program is finished.
[DOSINST.EXE for DOS Only installation]
The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the A3CONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Windows 95 installation procedure for ALS100+/ALS120:
=====================================================
1. After user installs the ALS100+/ALS120 sound card into the ISA slot in the
computer and powers on the system, Windows 95 will prompt user with a "New
Hardware Found" dialog box since the ALS100+/ALS120 sound card is ISA plug
and play. To install the Windows 95 drivers, select "Driver from disk
provided by hardware manufacturer" and click on OK.
2. Insert the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" diskette
into the appropriate drive and select that drive from the prompted dialog
box and click on OK. Windows 95 will copy all the needed files and set up
all the logic devices on the board automatically.
3. Install the ALSRACK player by running the SETUP.EXE file (also provided
on the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" disk) from
the Windows 95 Start menu|Run. This will create the Avance Sound Program
Group with the ALSRACK utility icon.
(See Appendix below for full descr of ALSRACK functions).
====================================================
[SETUP.EXE for Windows 3.1]
The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.
The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the A3CONFIG.EXE is started to configure the board setting
after the Setup program is finished.
[DOSINST.EXE for DOS Only installation]
The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the A3CONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Windows 95 installation procedure for ALS100+/ALS120:
=====================================================
1. After user installs the ALS100+/ALS120 sound card into the ISA slot in the
computer and powers on the system, Windows 95 will prompt user with a "New
Hardware Found" dialog box since the ALS100+/ALS120 sound card is ISA plug
and play. To install the Windows 95 drivers, select "Driver from disk
provided by hardware manufacturer" and click on OK.
2. Insert the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" diskette
into the appropriate drive and select that drive from the prompted dialog
box and click on OK. Windows 95 will copy all the needed files and set up
all the logic devices on the board automatically.
3. Install the ALSRACK player by running the SETUP.EXE file (also provided
on the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" disk) from
the Windows 95 Start menu|Run. This will create the Avance Sound Program
Group with the ALSRACK utility icon.
(See Appendix below for full descr of ALSRACK functions).
Constructeur
Avance Logic
Catégorie
Cartes sons et Lecteurs MP3
Modèle
Avance Logic ALS100+
Description
Logical Device 1 Internal Midi OPL3 Device
Système d'exploitation
Windows 95-98-98Se-Me
Version Driver
4.05.00.3000
Taille
706Kb
Nom de fichier
als120.zip
Informations
DOS and Windows 3.1 Installation for ALS100+/ALS120:
====================================================
[SETUP.EXE for Windows 3.1]
The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.
The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the A3CONFIG.EXE is started to configure the board setting
after the Setup program is finished.
[DOSINST.EXE for DOS Only installation]
The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the A3CONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Windows 95 installation procedure for ALS100+/ALS120:
=====================================================
1. After user installs the ALS100+/ALS120 sound card into the ISA slot in the
computer and powers on the system, Windows 95 will prompt user with a "New
Hardware Found" dialog box since the ALS100+/ALS120 sound card is ISA plug
and play. To install the Windows 95 drivers, select "Driver from disk
provided by hardware manufacturer" and click on OK.
2. Insert the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" diskette
into the appropriate drive and select that drive from the prompted dialog
box and click on OK. Windows 95 will copy all the needed files and set up
all the logic devices on the board automatically.
3. Install the ALSRACK player by running the SETUP.EXE file (also provided
on the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" disk) from
the Windows 95 Start menu|Run. This will create the Avance Sound Program
Group with the ALSRACK utility icon.
(See Appendix below for full descr of ALSRACK functions).
====================================================
[SETUP.EXE for Windows 3.1]
The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.
The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the A3CONFIG.EXE is started to configure the board setting
after the Setup program is finished.
[DOSINST.EXE for DOS Only installation]
The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the A3CONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Windows 95 installation procedure for ALS100+/ALS120:
=====================================================
1. After user installs the ALS100+/ALS120 sound card into the ISA slot in the
computer and powers on the system, Windows 95 will prompt user with a "New
Hardware Found" dialog box since the ALS100+/ALS120 sound card is ISA plug
and play. To install the Windows 95 drivers, select "Driver from disk
provided by hardware manufacturer" and click on OK.
2. Insert the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" diskette
into the appropriate drive and select that drive from the prompted dialog
box and click on OK. Windows 95 will copy all the needed files and set up
all the logic devices on the board automatically.
3. Install the ALSRACK player by running the SETUP.EXE file (also provided
on the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" disk) from
the Windows 95 Start menu|Run. This will create the Avance Sound Program
Group with the ALSRACK utility icon.
(See Appendix below for full descr of ALSRACK functions).
Constructeur
Avance Logic
Catégorie
Cartes sons et Lecteurs MP3
Modèle
Avance Logic ALS100+
Description
Logical Device 2 Joystick Device
Système d'exploitation
Windows 95-98-98Se-Me
Version Driver
4.05.00.3000
Taille
706Kb
Nom de fichier
als120.zip
Informations
DOS and Windows 3.1 Installation for ALS100+/ALS120:
====================================================
[SETUP.EXE for Windows 3.1]
The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.
The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the A3CONFIG.EXE is started to configure the board setting
after the Setup program is finished.
[DOSINST.EXE for DOS Only installation]
The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the A3CONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Windows 95 installation procedure for ALS100+/ALS120:
=====================================================
1. After user installs the ALS100+/ALS120 sound card into the ISA slot in the
computer and powers on the system, Windows 95 will prompt user with a "New
Hardware Found" dialog box since the ALS100+/ALS120 sound card is ISA plug
and play. To install the Windows 95 drivers, select "Driver from disk
provided by hardware manufacturer" and click on OK.
2. Insert the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" diskette
into the appropriate drive and select that drive from the prompted dialog
box and click on OK. Windows 95 will copy all the needed files and set up
all the logic devices on the board automatically.
3. Install the ALSRACK player by running the SETUP.EXE file (also provided
on the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" disk) from
the Windows 95 Start menu|Run. This will create the Avance Sound Program
Group with the ALSRACK utility icon.
(See Appendix below for full descr of ALSRACK functions).
====================================================
[SETUP.EXE for Windows 3.1]
The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.
The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the A3CONFIG.EXE is started to configure the board setting
after the Setup program is finished.
[DOSINST.EXE for DOS Only installation]
The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the A3CONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Windows 95 installation procedure for ALS100+/ALS120:
=====================================================
1. After user installs the ALS100+/ALS120 sound card into the ISA slot in the
computer and powers on the system, Windows 95 will prompt user with a "New
Hardware Found" dialog box since the ALS100+/ALS120 sound card is ISA plug
and play. To install the Windows 95 drivers, select "Driver from disk
provided by hardware manufacturer" and click on OK.
2. Insert the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" diskette
into the appropriate drive and select that drive from the prompted dialog
box and click on OK. Windows 95 will copy all the needed files and set up
all the logic devices on the board automatically.
3. Install the ALSRACK player by running the SETUP.EXE file (also provided
on the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" disk) from
the Windows 95 Start menu|Run. This will create the Avance Sound Program
Group with the ALSRACK utility icon.
(See Appendix below for full descr of ALSRACK functions).
Constructeur
Avance Logic
Catégorie
Cartes sons et Lecteurs MP3
Modèle
Avance Logic ALS100+
Description
Logical Device 3 External Midi MPU401 Device
Système d'exploitation
Windows 95-98-98Se-Me
Version Driver
4.05.00.3000
Taille
706Kb
Nom de fichier
als120.zip
Informations
DOS and Windows 3.1 Installation for ALS100+/ALS120:
====================================================
[SETUP.EXE for Windows 3.1]
The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.
The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the A3CONFIG.EXE is started to configure the board setting
after the Setup program is finished.
[DOSINST.EXE for DOS Only installation]
The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the A3CONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Windows 95 installation procedure for ALS100+/ALS120:
=====================================================
1. After user installs the ALS100+/ALS120 sound card into the ISA slot in the
computer and powers on the system, Windows 95 will prompt user with a "New
Hardware Found" dialog box since the ALS100+/ALS120 sound card is ISA plug
and play. To install the Windows 95 drivers, select "Driver from disk
provided by hardware manufacturer" and click on OK.
2. Insert the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" diskette
into the appropriate drive and select that drive from the prompted dialog
box and click on OK. Windows 95 will copy all the needed files and set up
all the logic devices on the board automatically.
3. Install the ALSRACK player by running the SETUP.EXE file (also provided
on the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" disk) from
the Windows 95 Start menu|Run. This will create the Avance Sound Program
Group with the ALSRACK utility icon.
(See Appendix below for full descr of ALSRACK functions).
====================================================
[SETUP.EXE for Windows 3.1]
The SETUP.EXE is a Windows 3.1 setup program that installs DOS and Windows
3.1 drivers and utilities.
The user can run SETUP.EXE by selecting File|Run... and typing "A:SETUP" on
the command line under Windows 3.1 Program Manager, or by typing "A:SETUP" at
DOS prompt if Windows directory is in the PATH. The SETUP.EXE copies all the
DOS drivers and utilities to the directory that user specifies during the
setup program. All the Windows 3.1 drivers and VxDs are copied to the
Windows system directory. When the user installs the Avance Sound System
for the first time the A3CONFIG.EXE is started to configure the board setting
after the Setup program is finished.
[DOSINST.EXE for DOS Only installation]
The DOSINST.EXE is a DOS installation program that copies all the DOS drivers
and utilities to the directory that user specifies. When the user installs
the Avance Sound System for the first time the A3CONFIG.EXE is started to
configure the board setting after the Setup program is finished. DOSINST.EXE
can be installed by typing A:DOSINST.EXE at the DOS prompt.
Windows 95 installation procedure for ALS100+/ALS120:
=====================================================
1. After user installs the ALS100+/ALS120 sound card into the ISA slot in the
computer and powers on the system, Windows 95 will prompt user with a "New
Hardware Found" dialog box since the ALS100+/ALS120 sound card is ISA plug
and play. To install the Windows 95 drivers, select "Driver from disk
provided by hardware manufacturer" and click on OK.
2. Insert the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" diskette
into the appropriate drive and select that drive from the prompted dialog
box and click on OK. Windows 95 will copy all the needed files and set up
all the logic devices on the board automatically.
3. Install the ALSRACK player by running the SETUP.EXE file (also provided
on the "ALS100+/ALS120 DOS/Win3.1/Win 95 Drivers and Utilities" disk) from
the Windows 95 Start menu|Run. This will create the Avance Sound Program
Group with the ALSRACK utility icon.
(See Appendix below for full descr of ALSRACK functions).
Constructeur
Avance Logic
Catégorie
Cartes sons et Lecteurs MP3
Modèle
Avance Logic ALS100+
Description
Drivers
Système d'exploitation
Windows 98
Version Driver
A1.40
Taille
924Kb
Nom de fichier
w98_100p.exe
Constructeur
Avance Logic
Catégorie
Cartes sons et Lecteurs MP3
Modèle
Avance Logic ALS100+
Description
Drivers
Système d'exploitation
Windows NT3.51-4
Version Driver
A0.70
Taille
84Kb
Nom de fichier
nt_100p.exe
