Behringer BCR2000 Télécharger Pilotes et Firmware

Preset-editor/library program for BCF2000 & BCR2000 and nearly all operating systems

- requires prior installation of free JAVA Tool (Java 2 Runtime Environment JRE)

- prior installation of BCF/BCR firmware update to version 1.07 recommended! INDEX
Features overview……….…………………………………………………………………..2
Installation…………………………………………………………………………………….3
Quick panel overview………………………………………………………………………..4
Nomenclature………………………………..………………………………….……………7
Scenario I – editing an existing preset………………………………..……………………8
Scenario II – creating a new preset from scratch…………………...…………………..16
Scenario III – presets compiling for a new ‘device’ setup…………………………..….20

New in V1.10 !

Push functions, which are assigned with Program Change commands, can now be stepped up and down (increment/decrement). The size of the steps is also programmable so if your presets are arranged in banks of a fixed size (eg. 8 presets per bank), V1.10 allows you to step up and down through the banks as well as preset for preset.

This version also incorporates a pair of bug fixes regarding MIDI clock data and transmission of NRPNs in GS/XG mode.

Optimally matched to B-CONTROL EDIT software

Bug fixes Index
How to update the new firmware v1.07………...………………….…………..…………1
New v1.07 features…............…………...........................….....………………..…….....2
BCF2000 templates..........……….……...........................….....………………..…….....5
BCFview description..........………...........................….....……………….……..…….....7

Small Utility Program for easy firmware updating

Please use this small utility program for easy firmware updating your B-CONTROL

Please update USB MIDI driver from 1.0.0.2 to 1.1.1.1 first, before using this tool!

Bugfixes:

BSOD removed when device was using USB-3 mode and Logic was started

Audio was distorted in case of heavy midi traffic

Enhancements:

in some early models of BCF2000 a switch from or to LC, BC or MC Mode causes the device to not work correctly if the user does not wait at least 7 seconds after switching off the device before switching it on again. A system message will now pop up saying : “The I/O device is configured incorrectly or the configuration parameters to the driver are incorrect.” In that case just click that box, switch off the BCF2000 wait for at least 7 seconds and switch it on again.

The DLL was removed. BEHRINGER International GmbH ........................................BCF2000_read_me.txt
........The BCR2000 is supported by the Microsoft(R) USB MIDI device drivers included with Windows (R) XP.

........Updating with the BEHRINGER USB / MIDI driver does offer some functional advantages

........How to install USB / MIDI drivers for Windows(R) XP.

........To ensure a trouble-free installation, please observe the following recommendations :

........Directly before performing the installation routine you may wish to reboot Windows(R) .

........Close any open applications and other background tasks which are started automatically with Windows(R) (eg. MSN messenger, WinAmp etc.).

........Disconnect the host PC from the internet and temporarily deactivate your virus scanner software.

........Disconnect or switch off any other USB devices which are not being used.

........Use a direct USB connection to the host PC, do not use a USB Hub.

........Before installing drivers, it is a good idea to make a backup of your system if possible.

........Connect the BCR2000 to the PC and power on.

........Allow the Windows(R) Hardware Installation Wizard to install the native USB / MIDI drivers

........If you are prompted to search the internet for drivers, please select "no, not this time" (third option)

........For each "Windows Logo Test" message, always choose "continue installation".

........The Windows(R) Hardware Installation Wizard will be run twice in total.

........Unzip the set-up.exe file and double click the icon to start.

........Follow the instructions on the splash-screen.

........After installing drivers it is a good idea to reboot Windows(R) (although this is not absolutely necessary).

Bugfix for rare "blue screen" MIDI error.

Table of Contents
Introduction 3
I. Operating mode selection 4
1. Mode selection with USB connection 4
2. Mode selection with double MIDI connection 4
3. Mode selection with single MIDI connection 4
II. Working with presets 5
1. Recalling presets 5
2. Storing presets 5
3. Archiving presets 5
III. Programming presets 6
1. Programming in manual EDIT mode 6
1.a Programming encoders (BCR2000 only) 6
1.b Programming push encoders 7
1.c Programming faders (BCF2000 only) 8
1.d Programming keys 8
2. Programming in automatic LEARN mode 9
2.a Programming encoders (BCR2000 only) 9
2.b Programming push encoders 9
2.c Programming faders (BCF2000 only) 10
2.d Programming keys 10
3. Programming MMC commands 11
3.a MMC in manual EDIT mode 11
3.b MMC in automatic LEARN mode 11

Index
getting connected (i) – USB ………….…………………………………..…………. 1
getting connected (ii) – MIDI ..……..…………..………………………………….. .. 3
getting connected (iii) – cascading BCF2000 / BCR2000 ……. ……………..…. 3
getting configured (i) – before starting Host Software ……………..…………… 5
getting configured (ii) – after starting Host Software …………….…..….……. 7
online resources …………………………………………………………..…..…………. 8