Dexxa Optical Wheel Mouse Télécharger Pilotes
Disponibles 7 fichiers pour Optical Wheel Mouse
Constructeur
Dexxa
Catégorie
Clavier et Souris
Modèle
Dexxa Optical Wheel Mouse
Description
Drivers
Système d'exploitation
MS-Dos
Version Driver
1.00
Taille
915Kb
Nom de fichier
dr_952872_en.zip
Informations
Optical Mouse important notices
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
Constructeur
Dexxa
Catégorie
Clavier et Souris
Modèle
Dexxa Optical Wheel Mouse
Description
Drivers
Système d'exploitation
Windows 2000
Version Driver
1.00
Taille
915Kb
Nom de fichier
dr_952872_en.zip
Informations
Optical Mouse important notices
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
Constructeur
Dexxa
Catégorie
Clavier et Souris
Modèle
Dexxa Optical Wheel Mouse
Description
Drivers
Système d'exploitation
Windows 3.1
Version Driver
1.00
Taille
915Kb
Nom de fichier
dr_952872_en.zip
Informations
Optical Mouse important notices
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
Constructeur
Dexxa
Catégorie
Clavier et Souris
Modèle
Dexxa Optical Wheel Mouse
Description
Drivers
Système d'exploitation
Windows 95
Version Driver
1.00
Taille
915Kb
Nom de fichier
dr_952872_en.zip
Informations
Optical Mouse important notices
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
Constructeur
Dexxa
Catégorie
Clavier et Souris
Modèle
Dexxa Optical Wheel Mouse
Description
Drivers
Système d'exploitation
Windows 95-98-98Se-Me-NT4-2000
Taille
915Kb
Nom de fichier
dr_952872_en.zip
Informations
Optical Mouse important notices
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
Constructeur
Dexxa
Catégorie
Clavier et Souris
Modèle
Dexxa Optical Wheel Mouse
Description
Drivers
Système d'exploitation
Windows 98
Version Driver
1.00
Taille
915Kb
Nom de fichier
dr_952872_en.zip
Informations
Optical Mouse important notices
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
Constructeur
Dexxa
Catégorie
Clavier et Souris
Modèle
Dexxa Optical Wheel Mouse
Description
Drivers
Système d'exploitation
Windows NT4
Version Driver
1.00
Taille
915Kb
Nom de fichier
dr_952872_en.zip
Informations
Optical Mouse important notices
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
NOTE; The Optical mouse may not function properly on all surfaces.
Surfaces that are too bright, or reflective may cause the mouse/cursor to
not track properly or the mouse/cursor may not move at all.
If this occurs try using the mouse on another surface.
After installing the driver you can redefine the 3rd, 4th, & 5th button by using the Dexxa
optical mouse software, or by right clicking the system tray icon.
1. Hardware Installation
1-1.Installing the Dexxa Optical Mouse with Mouse Port (PS/2) Connector
If you have a mouse with a round mouse port connector, you must turn off
the computer before connecting or disconnecting your mouse.
2. Dexxa Optical Mouse Driver Installation
2-1. Mouse Driver for Windows NT 3.51
To install Mouse Driver for Windows NT 3.51, insert the floppy
into the drive, click on File in Program Manager, select
Run, and type
A:\SETUP.EXE
if you insert the Mouse Driver Disk in drive A.
or type
B:\SETUP.EXE
if you insert the Mouse Driver Disk in drive B.
Follow the instructions on the screen.
2-2.Dexxa Optical Mouse Driver for Windows 95, Windows 98 & Windows NT 4.0
To install Mouse Driver for Windows 95 ( or NT 4.0 ), insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-3.Dexxa Optical Mouse Driver for Windows 2000
To install Mouse Driver for Windows 2000, insert the
floppy into the drive, click on the Start button, select Run,
and type
A:\SETUP.EXE
Where "A:" is the drive number you have. You may type "B:" if you use
drive B.
Follow the instructions on the screen. A new folder and application will
be added to your system tray.
2-4.To remove the Dexxa Optical Mouse Driver
In the Dexxa Optical Mouse Driver folder, Click the
"Uninstall" icon, and follow the instructions on the screen.
