BenQ CRW 4824P-W Télécharger Pilotes et Firmware

Firmware Version detection tool for MS Windows. IDE drive firmware detection tool. Run this to find out the current firmware version of your IDE drives ( CDROM / DVDROM / CDREWRITER ). Works in MS Windows.

Firmware upgrade for the BenQ 4824W model with firmware version "C.xZ" (the last letter is a 'Z').

Firmware upgrade for the BenQ 4824P 2.xx model with firmware version "DC.xD" . This firmware is only for the 2.xx series .

Firmware upgrade for the BenQ 4824P 2.xx model with firmware version "D.xD" (the last letter is a 'D'). This firmware is only for the 2.xx series.

Firmware upgrade for the BenQ 4824W model with firmware version "C.xZ" (the last letter is a 'Z').

Firmware upgrade for the BenQ 4824WI model with firmware version H.xJ (the last letter is a 'J'). Zip file containing the upgrade program for MS Windows98 / ME / 2000 / XP.

Firmware upgrade for the BenQ 4824P model with firmware version D.xC (the last letter is a 'C'). Zip file containing the upgrade program for MS Windows98 / ME / 2000 / XP. Support for Mount Rainier Standard added.

Please use this tool to check your current firmware.

User Guide to show how to use the flash program to flash the firmware of a BenQ CDRewriter .
The Windows Version of Firmware Upgrading Procedure.

1. Executive the Flash Program on Win98/Me/2000/XP directly.
Attention !! .. This program can’t work under Win95 / NT !!
2. Select the drive you want to upgrade, please refer to the Fig.1
3. Click “ Flash the drive ! “, please refer to the Fig.1
4. Then you would see the following windows, please click “ OK “
5. Flash Program would check the drive and show “ Please don’t turn off the power. Upgrading firmware… “
6. After upgrading, you would see the following window, it means that your drive already perform the firmware-upgrading job.
7. The last message would show “ === SUCCEED === “, please click “ Exit “ button to exit the program.

Read the instructions carefully to know how to use the Windows Version of the Firmware Update Tool. The Windows Firmware Update Tool supports Win98 / WinMe / Win2000 / WinXP .

CDROM / DVDROM / CDREWRITER MS-DOS Driver . Self-extracting ZIP file containing device driver file for MS-DOS Only

A B O U T C D - R O M D E V I C E D R I V E R
=======================================================================

To install the CD-ROM device driver, the syntax in CONFIG.SYS
is as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 [/P:xxx,yy] [/L:xx]

where [/P:xxx,yy]
specifies the IDE port which is connected to the drive and the
interrupt request.

'xxx' is the base address (hexadecimal notation) of IDE port.
xxx = 1f0 : Port 1
170 : Port 2
1e8 : Port 3
168 : Port 4

'yy' is the interrupt number (decimal notation) of the
corresponding IDE port.

[/L:xx]
specifies the message language. Available options are listed
as below:

xx = US : English (the default language)
GR : German
FR : French
SP : Spanish
IT : Italian
JP : Japanese

For example, when eight drives are installed, the command
line in the CONFIG.SYS file could be entered as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 /P:1f0,14 /P:170,15 /P:1e8,12 /P:168,10

NOTE:

Our device driver will automatically search the drives for 4 ports
up to 8 drives, and the ports are 0x1f0, 0x170, 0x1e8 and 0x168 with
interrupt number 14, 15, 12 and 10 as default, respectively. If your
IDE ports and their respective interrupt numbers are the same as
those mentioned above, you don't have to specify them verbosely.