BenQ CRW 8432A Télécharger Pilotes, Manuel et Firmware

Firmware Version detection tool for MS Windows. IDE drive firmware detection tool. Run this to find out the current firmware version of your IDE drives ( CDROM / DVDROM / CDREWRITER ). Works in MS Windows.

Please use this tool to check your current firmware.

Adaptec Easy CD Creator
Installing Easy CD Creator
To install Easy CD Creator:
1. Insert the Adaptec Easy CD Creator CD into your CD-Recorder or CD-ROM drive.
l If Autorun is enabled on your system, the Adaptec Installation window appears
automatically and you can skip steps 2 and 3.
2. From the Start menu, select Run.
3. Type d:\setup (substitute the appropriate letter of your CD-Recorder or CD-ROM drive
for d).
4. From the Adaptec Installation window, select from one of the following applications to
install:
à Adpatec Easy CD Creator: Create Audio CDs, Data CDs, and more
à Adaptec DirectCD: Write files directly to CD in much the same way that you
copy files to a floppy disk
5. Follow the installation instructions that appear on the screen.
6. When the installation is complete, click Finish. The Adaptec Installation window
appears again.
7. Install another application, or if you are finished click Exit.
8. Restart your computer when prompted for the changes to take effect.

CDROM / DVDROM / CDREWRITER MS-DOS Driver . Self-extracting ZIP file containing device driver file for MS-DOS Only

A B O U T C D - R O M D E V I C E D R I V E R
=======================================================================

To install the CD-ROM device driver, the syntax in CONFIG.SYS
is as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 [/P:xxx,yy] [/L:xx]

where [/P:xxx,yy]
specifies the IDE port which is connected to the drive and the
interrupt request.

'xxx' is the base address (hexadecimal notation) of IDE port.
xxx = 1f0 : Port 1
170 : Port 2
1e8 : Port 3
168 : Port 4

'yy' is the interrupt number (decimal notation) of the
corresponding IDE port.

[/L:xx]
specifies the message language. Available options are listed
as below:

xx = US : English (the default language)
GR : German
FR : French
SP : Spanish
IT : Italian
JP : Japanese

For example, when eight drives are installed, the command
line in the CONFIG.SYS file could be entered as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 /P:1f0,14 /P:170,15 /P:1e8,12 /P:168,10

NOTE:

Our device driver will automatically search the drives for 4 ports
up to 8 drives, and the ports are 0x1f0, 0x170, 0x1e8 and 0x168 with
interrupt number 14, 15, 12 and 10 as default, respectively. If your
IDE ports and their respective interrupt numbers are the same as
those mentioned above, you don't have to specify them verbosely.

Instalar Nero
En este capítulo se explica cómo configurar el PC para grabar datos en
CD y cómo instalar Nero en un ordenador que funcione bajo Microsoft
Windows.
Requisitos de componentes y sistema
Requisitos para utilizar Nero:
n Un PC 486 o superior a una velocidad de 133 MHz como mínimo.
n 8 MB de memoria DRAM como mínimo.
n Una unidad de CD/DVD-ROM para instalar Nero.
n Medio de CD-R o CD-RW compatible con la grabadora de CD.
n Una grabadora de CD-R o de CD-RW.
n Tiempo de acceso al disco duro inferior a 19 ms.
n 4,8 MB de espacio en el disco duro para el software de Nero.
Instalar y desinstalar Nero
³Instalar Nero
Para instalar Nero mediante este programa:
1. Inserte el CD Nero-Burning ROM en la unidad de CD/DVD-ROM.
2. El mecanismo de ejecución automática debería abrir la pantalla
principal de configuración.
(Si no se ejecuta automáticamente, haga clic en “Start Menu/Run”
(Menú Inicio/Ejecutar), a continuación, seleccione “autorun.exe” en el
CD de instalación.)
3. Seleccione “Install Nero & InCD” (Instalar Nero e InCD).
4. Seleccione “Nero” en la pantalla de configuración de Nero.
5. Siga las instrucciones que aparezcan en pantalla. Se le solicitará
algunos datos como, por ejemplo, el nombre de usuario, la empresa y
el tipo de configuración.
6. Una vez finalizada la instalación, reinicie el ordenador.
³Desinstalar Nero
1. Seleccione “Start Menu” (Menú Inicio) y, a continuación,
“Settings/Control Panel/Add-Remove Programs” (Configuración/Panel
de control/Agregar o quitar programas).
2. Seleccione “Remove/Nero Burning-ROM” (Quitar/Nero Burning-
ROM).
Se suprimirá todo el contenido de Nero.