BenQ DVP 1640A2 Télécharger Pilotes et Firmware
Disponibles 4 fichiers pour DVP 1640A2
Constructeur
BenQ
Catégorie
Lecteurs CD et DVD
Modèle
BenQ DVP 1640A2
Description
Firmware Version detection tool for MS Windows
Système d'exploitation
Applications
Version Firmware
1.0
Taille
48Kb
Nom de fichier
cdrominq.exe
Informations
Firmware Version detection tool for MS Windows. IDE drive firmware detection tool. Run this to find out the current firmware version of your IDE drives ( CDROM / DVDROM / CDREWRITER ). Works in MS Windows.
Constructeur
BenQ
Catégorie
Lecteurs CD et DVD
Modèle
BenQ DVP 1640A2
Description
Firmware update
Système d'exploitation
Firmware update
Version Firmware
1.21
Taille
167Kb
Nom de fichier
1640a2-121.zip
Informations
Firmware update for the 1640A2 DVD-ROM drive. DVD-ROM Upgrade operation
Upgarde procedure is as the following.
1. Unzip the attached file.
2. DVD-ROM connect to Secondary IDE channel with master configuration.
3. Boot the PC with MS-DOS mode.
(Attention ! : Upgarade utility cannot work on MS-DOS window.)
4. Execute up.bat
1640a2-121.ZIP include the following files.
atacm121.HEX (Firmware file)
UPG5A.EXE (Upgrade Utility)
UP.BAT (Upgrade Batch File)
UPDATE.TXT (This File)
Upgarde procedure is as the following.
1. Unzip the attached file.
2. DVD-ROM connect to Secondary IDE channel with master configuration.
3. Boot the PC with MS-DOS mode.
(Attention ! : Upgarade utility cannot work on MS-DOS window.)
4. Execute up.bat
1640a2-121.ZIP include the following files.
atacm121.HEX (Firmware file)
UPG5A.EXE (Upgrade Utility)
UP.BAT (Upgrade Batch File)
UPDATE.TXT (This File)
Constructeur
BenQ
Catégorie
Lecteurs CD et DVD
Modèle
BenQ DVP 1640A2
Description
Firmware Check
Système d'exploitation
Tool
Version Firmware
1.0
Taille
22Kb
Nom de fichier
fwcheck.zip
Informations
Please use this tool to check your current firmware.
Constructeur
BenQ
Catégorie
Lecteurs CD et DVD
Modèle
BenQ DVP 1640A2
Description
CDROM-DVDROM-CDREWRITER MS-DOS Driver
Système d'exploitation
MS-DOS
Langue
English, Spanish, German, Italian, and French
Version Driver
2.14
Taille
177Kb
Nom de fichier
apicd214.exe
Informations
CDROM / DVDROM / CDREWRITER MS-DOS Driver . Self-extracting ZIP file containing device driver file for MS-DOS Only
A B O U T C D - R O M D E V I C E D R I V E R
=======================================================================
To install the CD-ROM device driver, the syntax in CONFIG.SYS
is as follows:
DEVICE=VIDE-CDD.SYS /D:MSCD001 [/P:xxx,yy] [/L:xx]
where [/P:xxx,yy]
specifies the IDE port which is connected to the drive and the
interrupt request.
'xxx' is the base address (hexadecimal notation) of IDE port.
xxx = 1f0 : Port 1
170 : Port 2
1e8 : Port 3
168 : Port 4
'yy' is the interrupt number (decimal notation) of the
corresponding IDE port.
[/L:xx]
specifies the message language. Available options are listed
as below:
xx = US : English (the default language)
GR : German
FR : French
SP : Spanish
IT : Italian
JP : Japanese
For example, when eight drives are installed, the command
line in the CONFIG.SYS file could be entered as follows:
DEVICE=VIDE-CDD.SYS /D:MSCD001 /P:1f0,14 /P:170,15 /P:1e8,12 /P:168,10
NOTE:
Our device driver will automatically search the drives for 4 ports
up to 8 drives, and the ports are 0x1f0, 0x170, 0x1e8 and 0x168 with
interrupt number 14, 15, 12 and 10 as default, respectively. If your
IDE ports and their respective interrupt numbers are the same as
those mentioned above, you don't have to specify them verbosely.
A B O U T C D - R O M D E V I C E D R I V E R
=======================================================================
To install the CD-ROM device driver, the syntax in CONFIG.SYS
is as follows:
DEVICE=VIDE-CDD.SYS /D:MSCD001 [/P:xxx,yy] [/L:xx]
where [/P:xxx,yy]
specifies the IDE port which is connected to the drive and the
interrupt request.
'xxx' is the base address (hexadecimal notation) of IDE port.
xxx = 1f0 : Port 1
170 : Port 2
1e8 : Port 3
168 : Port 4
'yy' is the interrupt number (decimal notation) of the
corresponding IDE port.
[/L:xx]
specifies the message language. Available options are listed
as below:
xx = US : English (the default language)
GR : German
FR : French
SP : Spanish
IT : Italian
JP : Japanese
For example, when eight drives are installed, the command
line in the CONFIG.SYS file could be entered as follows:
DEVICE=VIDE-CDD.SYS /D:MSCD001 /P:1f0,14 /P:170,15 /P:1e8,12 /P:168,10
NOTE:
Our device driver will automatically search the drives for 4 ports
up to 8 drives, and the ports are 0x1f0, 0x170, 0x1e8 and 0x168 with
interrupt number 14, 15, 12 and 10 as default, respectively. If your
IDE ports and their respective interrupt numbers are the same as
those mentioned above, you don't have to specify them verbosely.
