Advance Peripherals 29161 U160 PCI Télécharger Pilotes et BIOS

Contents
--------

1. OS Support
2. Supported Features
3. Creating the Diskette
4. Diskette Content
5. Using FlasUtil
5.1. Flashing the BIOS
5.2. Flashing the NVRAM
5.3. FlasUtil Command line options
6. QLA12160 NVRAM Parameters
6.1. Configuration Settings
6.1.1. Host Adapter Settings
6.1.2. SCSI Device Settings
6.1.3. SCSI Bus Settings
6.1.4. Autoconfigure SCSI Devices
6.1.5 Selectable Boot Settings
6.1.6 Restore Default Adapter Settings
6.1.7 Raw Nvram Data
6.2. Scan SCSI Bus
6.3. SCSI Disk Utility
6.4. Select Host Adapter
7. Additional Notes
8. Contacting Qlogic

This release has been tested with the following:

a. Windows 95 Retail Version.

b. Windows 95 OEM Service Release 2 (Build 950b).

c. Windows 98/ME Retail Version.
This document is divided into 4 Sections:

Section 1: Windows 9X/ME files on this diskette.

Section 2: Installation of Windows 9X/ME onto a SCSI disk.

Section 3: Adding a QLogic Adapter to an existing system.

Section 4: Miniport Driver Adapter Settings.

Contents
--------

1. OS Support
2. Supported Features
3. Release History
4. Creating the Driver Diskette
5. Installing the Driver
5.1. Fresh OS installation with the QLogic Controller as Boot
5.2. Adding the QLogic Controller to the Existing OS
5.3. Updating the existing QLogic Driver
6. Removing the Driver
7. Driver Parameters
8. Limitations
9. Additional Notes
10. Diskette Content
11. Contacting QLogic

Contents
--------

1. OS Support
2. Supported Features
3. Release History
4. Creating the Driver Diskette
5. Installing the Drivera
5.1. Fresh OS installation with the QLogic Controller as Boot
5.1.1. Installing Windows NT 4.0 from the CD-ROM
5.1.2. Installing Windows NT 4.0 from the diskettes
5.2. Adding the QLogic Controller to the Existing OS
5.3. Updating the existing QLogic Driver
6. Removing the Driver
7. Driver Parameters
7.1. System Parameters
7.2. NVRAM Parameters
8. Diskette Content
9. Contacting Qlogic