Buffalo HD-HBU2 DriveStation Télécharger Pilotes, Utilitaires et Manuel

DriveStation Setup
Flip the power switch on the back of the DriveStation to the ON position.
In Windows 2000 and XP, the DriveStation will automatically install upon
power-on.
Open ‘My Computer’ and the new drive will be present. By default it will
pick the fi rst available drive letter and will be named ‘Local Disk’. The
DriveStation comes pre-formatted so you may begin using it immediately.
The DriveNavigator CD includes several useful utilities for your Windows
System. Please insert the DriveNavigator CD into your CD-ROM Drive to
learn more about them.
Windows 98SE & ME
Insert the DriveNavigator CD into your CD-ROM Drive. Shortly thereafter
the DriveNavigator Easy Setup program will launch.
NOTE: If the DriveNavigator program does not launch, it can be launched
by pressing on the ‘Start Menu’ and selecting the ‘Run’ option. Once the
dialog opens, type X:\easysetup.exe (where X is CD-ROM drive letter).
The Easy Setup Wizard will begin running. Please follow the on screen
documentation to complete the DriveStation Setup for your system. The
DriveNavigator CD includes several useful utilities for your Windows
System. Please explore the CD contents to learn more about them.

Using DriveStation with LinkStation
Flip the power switch on the back of the DriveStation to the ON position.
Please refer to the User Manual on the LinkStation’s LinkNavigator CD for
LinkStation USB Disk confi guration.

DriveStation Setup
Flip the power switch on the back of the DriveStation to the ON position.
In Windows 2000 and XP, the DriveStation will automatically install upon
power-on.
Open ‘My Computer’ and the new drive will be present. By default it will
pick the fi rst available drive letter and will be named ‘Local Disk’. The
DriveStation comes pre-formatted so you may begin using it immediately.
The DriveNavigator CD includes several useful utilities for your Windows
System. Please insert the DriveNavigator CD into your CD-ROM Drive to
learn more about them.
Windows 98SE & ME
Insert the DriveNavigator CD into your CD-ROM Drive. Shortly thereafter
the DriveNavigator Easy Setup program will launch.
NOTE: If the DriveNavigator program does not launch, it can be launched
by pressing on the ‘Start Menu’ and selecting the ‘Run’ option. Once the
dialog opens, type X:\easysetup.exe (where X is CD-ROM drive letter).
The Easy Setup Wizard will begin running. Please follow the on screen
documentation to complete the DriveStation Setup for your system. The
DriveNavigator CD includes several useful utilities for your Windows
System. Please explore the CD contents to learn more about them.

Using DriveStation with LinkStation
Flip the power switch on the back of the DriveStation to the ON position.
Please refer to the User Manual on the LinkStation’s LinkNavigator CD for
LinkStation USB Disk confi guration.

The Power Save Utility is a simple utility that allows a user to schedule shut-down and startup
times for the DriveStation disk. This is ideal for computers that remain on for extended periods of
time and do not require constant access to the DriveStation. This utility promotes power saving
and longevity of the drive by shutting down the internal hard drive when it is not needed.
Install Utility – Install the Power Save Utility by
running the EasySetup Wizard off of the DriveNavigator
CD (This is done by inserting the DriveNavigator CD into
a Windows System). Click on the ‘Install Power Save
Utility’ option and press the ‘Start’ button.
A new Power Save Utility Dialog Box will open. Press the
‘Start’ button to continue the installation process.

A warning dialog may appear instructing you to enable the
Performance Monitor. If this dialog appears, please press
the ‘OK’ button to continue.
The utility installation has completed successfully, press the
‘Next’ button to begin using the Power Save Utility. The
Power Save Utility will appear on your screen automatically.
The utility will run everytime you start your PC. It will run in
your system tray and can be accessed by double clicking on
the ‘Buffalo Power Save Utility’ icon.

Power Save Utility – The Power Save Utility main dialog
screen lists the DriveStation drive(s) that is/are attached to the
computer. The Power Save Utility controls the ability to shut
down the spinning hard drive inside the DriveStation. Data will
still be accessible after a short startup time. Also, some data
may remain in the device’s buffer for instant connectivity. It
provides three buttons to perform its functions. If more then one
DriveStation is listed, then please select the proper DriveStation
from the list and then press on the appropriate action button.
Timer Settings – The Timer Settings allow the user to
specify a specifi c time interval to power off the DriveStation. For
instance, if the DriveStation is to be powered off after ‘1 Hour’
of inactivity, then select ‘1 Hour’ from the pull down menu and
press the ‘OK’ button. If you would prefer to keep this function
disabled, then select ‘Disabled’ from the pull down menu and
press the ‘OK’ button.
Apply - Please press the ‘Apply’ button on the main screen
after making any changes to the schedule. If the ‘Apply’ button is
not pressed, then the changes will not be evident after the PC is
restarted.

Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting up Secure Lock Ware. . . . . . . . . . . . . . . . . . . . . 4
Installing Software . . . . . . . . . . . . . . . . . 4
Configuration . . . . . . . . . . . . . . . . . . . 6
Reformatting Device . . . . . . . . . . . . . . . 9
Using Secure Lock Ware . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Entering your Password . . . . . . . . . . . . . . . . . 16
Locking a Device. . . . . . . . . . . . . . . . . . . 17
Removing Secure Lock Ware . . . . . . . . . . . . . . . . . . . . . . . . . 18
Disabling Encryption . . . . . . . . . . . . . 18
Uninstalling Software . . . . . . . . . . . . 20
File Encrypter Software . . . . . . . . . . . . . . . . . . . . . . 21
Contact Information . . . . . . . . . . . . . . . . . . . . . . 25

The Backup Utility is a simple utility that allows a user to backup their data onto the DriveStation.
Backups are recommended for any user who cannot afford to lose their data. If a computer failure
happens on your computer, you have a backup copy on the DriveStation. The Backup Utility
includes a scheduler and a restore feature.
Install Utility – Install the Backup Utility by running the
EasySetup Wizard off of the DriveNavigator CD (This is
done by inserting the DriveNavigator CD into a Windows
System). Click on the ‘Install Easy Backup Utility’ option
and press the ‘Start’ button.
An installer dialog box will appear. Press the ‘Start’
button to continue the installation process. Press the
‘Finish’ button when the second dialog box appears.
The Disk Backup Utility will launch after pressing the
‘Finish’ button. It can also be launched by double clicking
on the ‘Disk Backup Utility’ icon.

Disk Backup Utility (Performing Backup) – The Disk
Backup Utility main screen will appear. The Disk Backup Utility
will start every time you restart your PC. It will run out of the
system tray and can be accessed by double clicking on its icon in
the system tray.
The settings in the Disk Backup Utility are as follows:
Backup Destination - Press the ‘Change’ button in the
‘Backup Destination’ box to set the save location. This is where
the Backup Utility will copy the backup data to. Select the disk
you would like to backup too. The DriveStation will have a small,
blue ‘U’ on it icon. It is recommended to backup data to the
DriveStation. Once you have selected the destination, press the
‘OK’ button.

Schedule - The schedule is an optional setting that can be
used to make the backups occur on a regular basis. Press the
‘Change’ button inside the ‘Schedule’ box to setup the schedule.
The schedule has four options. Other than the ‘Do not schedule
backup’ option, you will be forced to specify additional information
regarding the backup time. In this case, use the pull down menus
to select the appropriate settings and press the ‘OK’ button.

Driver, all downlads here are for the HD-HBxxU2 series