Dymo LabelManager 9000 and PC-10 Télécharger Pilotes

This file contains all the print drivers needed to run the LabelMANAGER 9000 and PC-10

This file contains all the print drivers needed to run the LabelMANAGER 9000 and PC-10 TABLE OF CONTENTS

1 INSTALLATION
1.1 System Requirements

2 LIST OF FILES

3 KNOWN PROBLEMS


1 INSTALLATION

Use the standard 'Add Printer' wizard provided by Windows to install the
driver for Dymo Label Maker. You can start this program by double clicking
on 'Add Printer' icon in the printers folder. Follow the instructions on
the screen to complete the installation.

For optimal performance of your Dymo Label Maker it is recommended to use a
Dymo Port. Read on-line help for more information on Dymo Port and how to
install it.

1.1 System Requirements
~~~~~~~~~~~~~~~~~~~
The following list defines the recommended system requirements
needed to successfully install and run your Dymo Printer Driver
for Windows

* Minimum: -PC or laptop with 486 processor at 66 MHz
-4 Mb of internal memory
-Hard disk with 20 Mb of free disk space
-VGA resolution monitor
-A Windows compatible pointing device

* Recommended: -PC or laptop with Pentium processor at 100 MHz
-8 Mb of internal memory

* Operating systems: -Windows 95
-Windows 98
-Windows NT 4.0

2 LIST OF FILES

If you have down loaded the Dymo Printer Driver from a web site,
please verify that you have all the required files after unzipping
the package.
On Windows NT 4.0, you should have the following files:
1. DYMOLM.DLL
2. DYMOLM.HLP
3. DYMOLM.INF
4. DYMOMON.DLL
5. DYMONTUI.DLL
6. DYMOPM.DLL
7. LAYOUT.INF
8. MONITOR.INF
9. README.TXT

On Windows 95 and 98, you should have the following files:
1. DYMOLM.HLP
2. DYMOLM.INF
3. DYMOLM95.DRV
4. DYMOMON.DLL
5. DYMOPM.DLL
6. README.TXT
7. UNIDRV.DLL

This file contains all the print drivers needed to run the LabelMANAGER 9000 and PC-10 TABLE OF CONTENTS

1 INSTALLATION
1.1 System Requirements

2 LIST OF FILES

3 KNOWN PROBLEMS


1 INSTALLATION

Use the standard 'Add Printer' wizard provided by Windows to install the
driver for Dymo Label Maker. You can start this program by double clicking
on 'Add Printer' icon in the printers folder. Follow the instructions on
the screen to complete the installation.

For optimal performance of your Dymo Label Maker it is recommended to use a
Dymo Port. Read on-line help for more information on Dymo Port and how to
install it.

1.1 System Requirements
~~~~~~~~~~~~~~~~~~~
The following list defines the recommended system requirements
needed to successfully install and run your Dymo Printer Driver
for Windows

* Minimum: -PC or laptop with 486 processor at 66 MHz
-4 Mb of internal memory
-Hard disk with 20 Mb of free disk space
-VGA resolution monitor
-A Windows compatible pointing device

* Recommended: -PC or laptop with Pentium processor at 100 MHz
-8 Mb of internal memory

* Operating systems: -Windows 95
-Windows 98
-Windows NT 4.0

2 LIST OF FILES

If you have down loaded the Dymo Printer Driver from a web site,
please verify that you have all the required files after unzipping
the package.
On Windows NT 4.0, you should have the following files:
1. DYMOLM.DLL
2. DYMOLM.HLP
3. DYMOLM.INF
4. DYMOMON.DLL
5. DYMONTUI.DLL
6. DYMOPM.DLL
7. LAYOUT.INF
8. MONITOR.INF
9. README.TXT

On Windows 95 and 98, you should have the following files:
1. DYMOLM.HLP
2. DYMOLM.INF
3. DYMOLM95.DRV
4. DYMOMON.DLL
5. DYMOPM.DLL
6. README.TXT
7. UNIDRV.DLL