Gravis Xperience Joystick Télécharger Pilotes

I. INSTALLING THE IMMERSION FEEDBACK DRIVERS

1A. Installation of Device through USB port
1B. Installation of Device through Serial Port
1C. Installation of Device through the Game Control Panel
1D. Testing & Calibration
1E. ImmCheck
a. Detecting Microsoft(r) DirectX 5(tm)
b. Detecting a Game Port Joystick
c. Installing a Game Port Joystick

II. KNOWN BUGS

III. TROUBLE SHOOTING
*********************************************************************

I. INSTALLING THE IMMERSION DRIVERS

1A. Universal Serial Bus (USB) Device Installation:
---------------------------------------------------

If your device has a USB connector and your computer supports USB,
you can take advantage of the automatic Plug and Play installation. This
requires either Windows98(tm) or Windows95(tm) "OSR 2.1" or higher. Your system
must also have USB connectors or a USB adapter card.

If you have all the above, perform the following installation steps:

Windows 95

1) Turn on your computer and boot to Windows95.
2) Plug the device into the computer's USB connector, making sure that the device's power is on.
3) Your computer will detect an "Unknown Device."
4) Insert the floppy disk or CD-ROM containing the IMMERSION Drivers.
5) Click Next.
6) If the Drivers are on a floppy disk and detected, click "Next" or "Finish" to complete the Driver installation. If the drivers are on a CD-ROM or not detected in the root directory of the floppy disk, click on the "other location" button. You can then enter the directory of the drivers in the box, or choose "browse" and find it's location. Click "Next" or "Finished" to continue.
7) While installing the Driver, Windows may again ask for the location of a specific file. Simply choose the directory of the drivers, and click "Okay."
8) Click Finish and restart the computer if necessary.


Windows 98
1) Turn on your PC and boot to Windows98.
2) Plug the device into the computer's USB connector, making sure that the device's power is on.
3) Your computer will detect the device and report "New Device Found."
4) Click Next
5) Choose "Search for Best Drivers" and click "Next."
6) Insert the floppy disk or CD-Rom containing the Immersion Drivers
7) Specify the location of the drivers, either the Floppy Drive, CD-ROM, or manually browse for the drivers.
8) Click Next.
9) Click Next.
10) While installing the Driver, Windows may again ask for the location of a specific file. Simply choose the directory of the drivers, and click "Okay."
11) Click Finish and restart the computer if necessary.
1B. Serial Device Installation:
------------------------------

If you do not have the necessary USB components listed above, use the
serial connector only and perform the following installation steps:

1) Plug the device into the computer's serial connector, making sure that the device's power is on.
2) Start up or restart your computer.
3) Windows' Plug and Play should detect the device through Plug and Play. You can then install the device by following the instructions from step 2 above in the "USB DEVICE INSTALLATION" section.

If your device was not detected as a Plug and Play, you may manually add the deive as follows:

1) Plug the device into the computer's serial connector, making sure that the device's power is on.
2) Open the Control Panel from the Start menu under Settings.
3) Open the System icon and click on the Device Manager tab.
4) Click on the Refresh button.
4) You can then install the device by following the instructions from step 2 above in the "Installing USB Connection" section.