Allnet TOTALCOM Pro Télécharger Pilotes

Installing MultiFunction PRO drivers using CD-ROM:
(1) Insert the MultiFunction PRO into an available PCMCIA (Type II or III) slot. Windows 2000 will detect the MultiFunction PRO and pop up a "Welcome to the Found New Hardware Wizard" dialog box. Click on "Next>" to let the wizard search for the drivers.

(2) Select "Search for the best driver for your device(Recommended)", click on "Next>" again. Choose "CD-ROM drives" as the option for installation and click "Next>".

(3) When prompted to insert installation disks, insert the MultiFunction PRO Installation CD-ROM into the CD-ROM drive; then click on "Next" to continue. The Wizard will read the installation information files on the CD-ROM and display a dialog box showing that it has found the driver for the device.

(4) Click on "Next>", the Wizard will copy some files. The dialog box "Completing the Found New Hardware Wizard" will appear. Click "Finish" and Windows 2000 will start to add the following MultiFunction PRO devices that it has found:
- WAVEXA XP-BUS Controller
- MultiFunction PRO XP-LAN 10/100 Ethernet Adapter
- MultiFunction PRO XP-ISDN Adapter

(5) If the dialog boxes "Digital Signature Not Found" appear, click "Yes" to continue the installation.

(6) The First half of the installation has been completed.

(7) The Second half of the installation can be launched by clicking on the "Start" button and then run. Enter "d:\Win2k\setup" (assuming that d: is your CD-ROM drive) as the program to open. Click on "Ok" to continue.

(8) WAVEXA Setup will install MultiFunction PRO 56K Modem and MultiFunction PRO GSM Modem. If the dialog boxes "Digital Signature Not Found" appear, click "Yes" to continue the installation.

(9) Once the "Installation Completed" dialog appears, it indicates that the second half of installation has ended and a reboot of the system is needed.

(10) Click on "Finish" to reboot Windows. You will have to configure your MultiFunction PRO XP-LAN 10/100 Adapter before accessing the network. For further details of your network configuration, please consult your system administrator.

Installing MultiFunction PRO Base Software drivers using CD-ROM:
(1) Insert the MultiFunction PRO into an available PCMCIA (Type II or III) slot. Windows will detect the MultiFunction PRO and pop up a dialog box. Click on "Next" to let the wizard search for the new drivers.
(2) Select "Search for the best driver for your device. (Recommended)" Choose CD-ROM drive as the option for installation.
(3) Insert the MultiFunction PRO Installation CD-ROM into the CD-ROM drive; then click on "Next" to continue. Windows will read the installation information file and display a dialog box showing that Windows is ready to install the best driver.
(4) Click on "Next" and "Finish". Windows will process the MultiFunction PRO base installation information files and begin to create the device entries for WAXEXA XP-BUS Controller; MultiFunction PRO XP-LAN 10/100 and MultiFunction PRO ExtremeSURFER 56K modem.
(5) If it is a Windows 98 system, a dialog box will prompt at this moment to ask for reboot of the system, click on "No" to allow the installation to continue.
(6) Part one of the installation is complete. Remove your Installation CD-ROM.
(7) Next WAVEXA drivers will detect and launch the MultiFunction PRO Installshield setup automatically. Click on "Next" to continue.
(8) Under the "Select Components" dialog box, choose the options you want to install. By default, all the options are selected. This Installation process is to facilitate pre-installation of upgrade option drivers. Click on "Next" to continue.
(9) Please have your Windows 95/98 CD-ROM ready when Dial-up Adapter and TCP/IP protocols are added automatically.
(10) Setup will copy files from your Windows 95/98 CD-ROM into your system.
(11) Click on "Finish" to restart Windows. You will have to configure your MultiFunction PRO XP-LAN 10/100 Adapter before accessing the network.