Accton EN1207 Télécharger Pilotes

Installing NDIS4 Miniport driver on Microsoft Windows NT 5.0
=================================================================

1. Plug Accton's EN1207 Series adapter into one of the Master PCI
slots of your PCI platform.
2. Turn power ON then boot from Windows NT 5.0.
3. Windows NT 5.0 will prompt "PCI Ethernet Controller" in
"New Hardware Found" dialog box.
4. Select "Search for suitable driver for your device(Recommand)"
from "Found New Hardware Wizard" dialog box, then click "Next"
button.
5. Select "Specify a location" from "Found New Hardware Wizard"
dialog box, then click "Next" button.
6. Insert the Accton EN1207 Series Driver Diskette in your floppy drive.
7. Enter the driver pathname, i.e. A:\WINNT\WNT50 (or B:\WINNT\WNT50),
then click "OK" button from "Found New Hardware Wizard" dialog box.
8."Found New Hardware Wizard"dialog box will found inf file.
i.e. A:\WINNT\WNT50\NETACCP.INF ,then click "Next" button.
9. Windows NT 5.0 will prompt "Accton EN1207B-TX/C-TX PCI Fast Ethernet
Adapter" in "Found New Hardware Wizard" dialog box,then click
"Finsh" button.
10. Windows NT 5.0 will prompt "New Connection" Wizard dialog box
,then click "Next" button.
11. You can Modify or Add your LAN protocol or LAN Service...form "LAN
Wizard",and click "Next" button to continue.
12. Type a name you want for this connection form "LAN Wizard" dialog box
,and click "Finsh" button.
13. Remove the Accton EN1207 Series Driver Diskette from your floppy drive.
14. Restart your computer to take effect the network function.