Aten IC-104SA Télécharger Pilotes et Manuel

Welcome to Serial Interface / PCI Card This latest version contains corrections to the last version and additions to the next version. You will find them listed below. Version History: V6.0.0 - Initial Release

?? INSTALLATION GUIDE FOR PCI SERIAL PORTS.......................................3
?? INSTALLATION GUIDE FOR PCI PARALLEL PORTS................................8

Welcome to Serial Interface / PCI Card This latest version contains corrections to the last version and additions to the next version. You will find them listed below. Version History: V6.0.0 - Initial Release

?? INSTALLATION GUIDE FOR PCI SERIAL PORTS.......................................3
?? INSTALLATION GUIDE FOR PCI PARALLEL PORTS................................8

Features
?? Fully compliable with PCI Spec. Ver 2.2 standard.
?? Supports both 64-bit & 32-bit PCI Bus and 3.3V & 5V connector keys.
?? High speed serial ports support baud rates up to 921.6Kbps.
?? Provides 128Kbyte maximize size FIFO memory which is 1024 times faster than
existing serial cards on the market. High-tech 128K FIFO can reduce CPU loading,
interrupting and improve system performance dramatically.
?? Assign serial ports Re-Map to ISA address 3F8, 3E8, 2F8, 2E8 automatically
under DOS, Win9x, ME, NT.
?? Plug and Play, I/O address and IRQ assigned by BIOS.
?? Works with various types of DB9M / DB25M serial devices through RJ-45 port.
?? Ready for the Intel® Itanium® and AMD® Athlon 64® 64-bit CPUs running Microsoft
Windows® XP 64-bit Edition Version 2003 and Windows® Sever 2003 for 64-bit
Itanium-based or Extended Systems.
?? ATEN industrial host controller series are certified by WHQL, CE, FCC approval.
?? Ideal for 56K V.90 external modems, ISDN terminal adapters, PDA, UPS, barcode
scanners and other high-speed serial port devices.

Normally any serial and parallel I/O ports can be supported by BIOS call
services in DOS environment. However there are only support 4 serial ports
(3F8h,2F8h,3E8h,,2E8h) and 3 parallel ports (3BCh/378h/278h) are supported
by BIOS/DOS.

If the user has more than one PCI-Card in the Slots, the dos driver
pcidos.exe remap the first ports, that found on the PCI-Slots. If the user wish
to remap ports of another PCI-Card, the Cards in the slots must
changed.

In case the PCI serial and parallel ports are different from the
above configurations (e.g. I/O address or more than 4 serial ports / 3
parallel ports), they are not supported by BIOS/DOS directly. However some
applications (e.g. "PComm Plus" could support 8 serial ports and each I/O
address is settable) have their own driver, thus PCI cards could
work correctly.

The following procedures will instruct you to install PCI serial
and parallel port device driver for DOS and Windows 3.1

Serial/Parallel PCI Card Driver Version 6.000, 2004/02/26

Supported Operating Systems:
Windows 2000 (x86)
Windows XP (x86)
Windows Server 2003 (x86)

To install or update the driver, run setup.exe.

Serial/Parallel PCI Card Driver Version 6.001, 2005/02/15

Supported Operating Systems:
Windows 2000 (x86)
Windows XP (x86)
Windows Server 2003 (x86)

To install or update the driver, run setup.exe.

1. Support Windows 2000/XP/2003/Vista(32 bit) driver