Spectravideo JP270 Download Drivers

The following is the important information of Spectravideo JP270 installation driver.

Driver Installation instructions for PC.

Important! These instructions may not be applicable to consoles.

• Click on Download Now and a File Download box will appear.
  Select Save This Program to Disk and a Save As box will appear.
  Select a directory to save the driver in and click Save.
  Locate the driver file using Windows Explorer when the download has completed.
  
  
• Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the JP270 model that was downloaded (for example c:\JP270). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.
  
  
• Remove any previus Spectravideo JP270 driver from Windows control panel and reboot the system.
  
  
• Windows now detects Spectravideo JP270 and searchs for a driver: you must stop any request and hit on "Cancel button".
  
  
• Double click on Setup.exe (or similar file xxx.exe) located in c:\JP270 folder
  
  
• Follow the on screen istructions
  
  

• Search and consult the Readme file for additional installation drivers instructions for your JP270.

  
  
  
• If during installation in Windows, you will be prompted with a message warning that the driver software for JP270 has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Spectravideo, and safe to use.
  
  
• Reboot the system
  
  
• Congratulations, the drivers for Spectravideo JP270 is installed.
  
  

Available 2 Drivers