Logitech Cordless MouseMan Optical > Download Drivers

README TABLE OF CONTENTS

1. Description
2. Installation
2.1 Standard Installation
3. Features
3.1 Zooming in Windows 95/98 and NT 4.0
4. Troubleshooting
4.1 Detection Problems with PS/2 Pointing Devices
4.2 Serial Port Detection Problems with Serial Pointing
Devices under DOS and Windows 3.1
4.3 Conflicts with other Serial Devices
4.4 Power Management Problems
4.5 How to disable the Middle Button Double-Click
4.6 Cordless Desktop
5. For more information
________________________________________


1. Description

"M83SETUP.EXE" contains the 8.32 version of the Logitech mouse
driver for Windows 95/98, Windows NT 4.0, and Windows 3.1X.

This is a mouse driver update ONLY. The driver works with any
Logitech Serial, PS/2, or USB pointing device(s) operating under
Windows. Note: USB support only under Windows 98.

This release DOES NOT include the Enhanced Mouse Control Center
with button assignments.

For a full retail release of the Logitech Enhanced MouseWare
software for Windows 95/98, Windows NT 4.0 or Windows 3.1x,
please contact Logitech Sales.

Installation of this driver into Windows 95/98, Windows 3.1x,
or Windows NT 4.0 will automatically set the middle button of a
Logitech 3/4 button mouse to function as a left mouse button
double-click.

If you are using a Logitech 4 button roller mouse or a 4 button
mouse or trackball, the fourth button (Thumb button) will be set
to function as a standard middle button.

Install the full retail release of MouseWare 8.x or above
for full 4 button functionality under Windows 95/98, and
Windows NT 4.0.

Windows NT 4.0 Notes

NOTE: To install the driver under Windows NT 4.0, you must have
sufficient access rights to install device drivers. Log on as
Administrator, or contact your System Administrator if you
cannot install the driver.

This release DOES NOT support the Logitech Bus Mouse.

2. Installation

Before installing any software under Windows NT 4.0, we
strongly recommend you create an Emergency Repair Disk using
the Repair Disk utility provided by the system (RDISK.EXE).


2.1 Standard Installation

Windows 3.1, Windows 95/98, Windows NT 4.0

Run M83SETUP.EXE and follow the on-screen instructions to install
this mouse driver update.

README TABLE OF CONTENTS

1. Installation
1.1 Standard Installation
1.2 Drivers-Only Installation
1.2.1 Drivers-Only Installation for Windows 2000 and XP
1.2.2 Drivers-Only Installation for Windows NT 4.0 SP6
1.2.3 Drivers-Only Installation for Windows 98 and Me
2. Uninstall Program
3. Troubleshooting
3.1 Detection Issues with USB Mice
3.2 Detection Problems with PS/2 Pointing Devices
3.3 Detection of C-Series Pointing devices under Windows 98
3.4 Detection of Serial Mice under Windows 2000
3.5 Detection of Serial Mice under Windows XP
3.6 Conflicts with Modems and other Serial Devices
3.7 Power Management Problems Under Windows 98 or Windows Me
3.8 Logitech Enhanced Mouse Control Panel is not Updated
Under Windows 98 or Windows Me
3.9 Scrolling/wheel related issues
3.10 Connection Issues for Cordless Pointing Devices
3.11 Internet Explorer 4.x needed to view Help
3.12 Conflict With Logitech Digital Gameport Devices On
WinXP/Win2000
3.13 Error Message when Entering Standby in Windows XP
3.14 No support for Input Method Editor (IME) in the
Keystroke function
4. For more information

________________________________________

1. Installation

Logitech MouseWare supports Windows 98, Windows Me,
Windows NT 4.0 SP6, Windows 2000, and Windows XP.

Before installing any software under Windows NT 4.0 SP6, we
strongly recommend you create an Emergency Repair Disk using
the Repair Disk utility provided by the system (RDISK.EXE).

Please note that USB mice are only supported under Windows 98,
Windows Me, Windows 2000, and Windows XP.

1.1 Standard Installation

Run Setup.exe to install the Logitech MouseWare software.

During the MouseWare installation under Windows 2000 and
Windows XP, if the "Digital Signature Not Found" dialog box
appears asking if you wish to continue the installation, click
on the "Yes" or "Continue Anyway" button.

1.2 Drivers-Only Installation

You can load device drivers without running the Setup program.
Loading the device drivers this way, however, does not install
the Logitech Enhanced Mouse Properties user interface.

1.2.1 Drivers-Only Installation for Windows 2000 and XP

Please execute the following steps to perform a drivers-only
installation for Windows 2000 and Windows XP:

1) Click on the "Start" button on the Windows Desktop.
2) Select "Settings", then "Control Panel".
3) From the Control Panel, double click on the "System" icon.
4) From the System Properties, click on the "Hardware" tab.
5) Click on the "Device Manager" button.
6) From the Device Manager, double click the "Mouse" icon.
7) Double click on the Mouse Type icon.
8) From the Mouse Properties dialog box, click on the "Driver"
tab, then click on the "Update Driver" button.
9) From the "Update Device Driver Wizard", click the "Next"
button.

README TABLE OF CONTENTS

1. Installation
1.1 Standard Installation
1.2 Drivers-Only Installation
1.2.1 Drivers-Only Installation for Windows 2000 and XP
1.2.2 Drivers-Only Installation for Windows NT 4.0 SP6
1.2.3 Drivers-Only Installation for Windows 98 and Me
2. Uninstall Program
3. Troubleshooting
3.1 Detection Issues with USB Mice
3.2 Detection Problems with PS/2 Pointing Devices
3.3 Detection of C-Series Pointing devices under Windows 98
3.4 Detection of Serial Mice under Windows 2000
3.5 Detection of Serial Mice under Windows XP
3.6 Conflicts with Modems and other Serial Devices
3.7 Power Management Problems Under Windows 98 or Windows Me
3.8 Logitech Enhanced Mouse Control Panel is not Updated
Under Windows 98 or Windows Me
3.9 Scrolling/wheel related issues
3.10 Connection Issues for Cordless Pointing Devices
3.11 Internet Explorer 4.x needed to view Help
3.12 Conflict With Logitech Digital Gameport Devices On
WinXP/Win2000
3.13 Error Message when Entering Standby in Windows XP
3.14 No support for Input Method Editor (IME) in the
Keystroke function
4. For more information

________________________________________

1. Installation

Logitech MouseWare supports Windows 98, Windows Me,
Windows NT 4.0 SP6, Windows 2000, and Windows XP.

Before installing any software under Windows NT 4.0 SP6, we
strongly recommend you create an Emergency Repair Disk using
the Repair Disk utility provided by the system (RDISK.EXE).

Please note that USB mice are only supported under Windows 98,
Windows Me, Windows 2000, and Windows XP.

1.1 Standard Installation

Run Setup.exe to install the Logitech MouseWare software.

During the MouseWare installation under Windows 2000 and
Windows XP, if the "Digital Signature Not Found" dialog box
appears asking if you wish to continue the installation, click
on the "Yes" or "Continue Anyway" button.

1.2 Drivers-Only Installation

You can load device drivers without running the Setup program.
Loading the device drivers this way, however, does not install
the Logitech Enhanced Mouse Properties user interface.

1.2.1 Drivers-Only Installation for Windows 2000 and XP

Please execute the following steps to perform a drivers-only
installation for Windows 2000 and Windows XP:

1) Click on the "Start" button on the Windows Desktop.
2) Select "Settings", then "Control Panel".
3) From the Control Panel, double click on the "System" icon.
4) From the System Properties, click on the "Hardware" tab.
5) Click on the "Device Manager" button.
6) From the Device Manager, double click the "Mouse" icon.
7) Double click on the Mouse Type icon.
8) From the Mouse Properties dialog box, click on the "Driver"
tab, then click on the "Update Driver" button.
9) From the "Update Device Driver Wizard", click the "Next"
button.