Available 2 files for Diamond SupraExpress 56 USB PC
Select Files
Company
Diamond
Categories
Fax & Modem & ISDN
Model
Diamond SupraExpress 56 USB PC
Description
Drivers
Operating System
Windows 2000
Size Driver
51KB
File Name
2000.zip
Observations
Windows 2000 drivers for SupraExpress 56e V.90 ACF2 modem, SUP2730
Instructions for new installation of drivers:
1) With the computer off, install the modem to the serial port on back of computer, plug power supply into wall and into back of modem.
2) Boot the system. Windows will not indicate that the modem was installed, but a "56K Data Fax Modem PnP" will be installed.
3) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
4) Click on the + in front of Modems, right-click on the modem and go to Properties.
5) On the Driver tab, click Update Driver. The Update Device Driver Wizard will begin.
6) Choose to "Display a list of known drivers" as opposed to "Search for a suitable driver."
7) Point the procedure to the location on your hard drive or floppy disk where you extracted the drivers. You will need to click "Have Disk" and and type in the path to the drivers.
8) Pick the "SupraExpress 56e V.90 SUP2730" from the list. Windows will install drivers for this modem.
Testing the Installation:
1) Go to Start > Settings > Control Panels. Double-click on System, click on the Hardware tab, and click on Device Manager.
2) Click on the + in front of Modems, right-click on the modem and go to Properties.
3) On the Diagnostics tab, click the Query Modem button. After a few seconds, The ATI commands should contain information, including an ATI3 response of 3.210-03, the firmware revision for this modem.
Company
Diamond
Categories
Fax & Modem & ISDN
Model
Diamond SupraExpress 56 USB PC
Description
Drivers
Operating System
Windows 95-98-98se
Size Driver
349KB
File Name
95-98-98se.zip
Observations
SupraExpress 56 USB Series Windows 9x files
===============================
Applicable files
-----------------
supraexpress_56e_usb_pc-driver.exe
Release Notes
-----------------
These INF's are provided for those who might have lost their original
disks or received a modem before certain Microsoft functionality was
available. If your modem is working correctly with your system, there
is no reason to install new INF files.
Installation Instructions
-----------------
You should print this document for easy reference.
There are two possible paths for installing these files on your computer.
The first path is for those who have not installed any drivers for thier
modem. The second is for those who have already installed INF files for
their modem.
NOTE: You should ensure that you have installed any and all updated drivers
necessary for your system's USB ports. You may need to contact your system
manufacturer to verify this. In addition, you should ensure that your USB
port is configured to use an unshared interrupt request (IRQ). Your
USB modem may not operate properly when it is configured for a shared resource.
Contact your system manufacturer for assistance if this is the case.
Installation Process 1:
----------------
For those who have installed no INF files:
1. Label a blank formatted floppy disk, "SupraExpress 56 USB Driver files."
2. Insert the disk into the floppy drive.
3. Download the file onto a floppy disk. In your browser, click on the
file name, supraexpress_56e_usb_pc-driver.exe. Your browser should prompt
as to where you would like save the file. You should select the floppy drive,
"a:\" (without the quotes).
4. When the download is complete, you should disconnect from the internet and
close all open programs.
5. You should then need to extract the files from the downloaded file. Click
Start\Run\Browse. Locate the supraexpress_56e_usb_pc-driver.exe file on the
floppy drive, "a:." Click OK and then OK again.
6. A Self-Extractor window should appear. "C:\WINDOWS\TEMP" should appear in
the Unzip To Folder window. This is the default location. You should change this
to "a:" (without the quotes). Click on the Unzip button.
7. After the files have been extracted click OK to the "success" window and then
Close to exit the extractor program.
At this point the files have been extracted and are ready for use to install.
You should be able to install your modem in the manner described in the
installation guide that accompanied the modem. When prompted for a driver disk,
use the disk you just created.
Access to Official Website Diamond
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.