Hewlett Packard HP LaserJet 1220 All-in-One > Download Drivers

This patch addresses communication between the HP printer (HP LaserJet 1220 / HP LaserJet 3200M) and the Mac host in both USB and network configurations.

This software release consists of one file: HP All-in-One Communications.
To install this software update, you must replace the existing version of this file in the System:Startup Items folder with this new version. To do so, perform the following steps:
Power off the LaserJet.
Shut down all running applications, including the Launcher if applicable. Any applications in the System:Startup Items folder need to be disabled until step #10 has completed.
On the Desktop, select and open your boot volume. This will open a finder window.
In the Finder window that just opened, select and open the System Folder.
In the System Folder finder window, select and open the Startup Items folder.
Drag the HP All-in-One Communications icon from the Startup Items folder to the Trash.
Drag the new HP All-in-One Communications icon delivered in this package and place it in the Startup Items folder.
Shutdown the Mac.
Power on the LaserJet.
Power on the Mac.

This patch addresses communication between the HP printer (HP LaserJet 1220 / HP LaserJet 3200M) and the Mac host in both USB and network configurations.

This software release consists of one file: HP All-in-One Communications.
To install this software update, you must replace the existing version of this file in the System:Startup Items folder with this new version. To do so, perform the following steps:
Power off the LaserJet.
Shut down all running applications, including the Launcher if applicable. Any applications in the System:Startup Items folder need to be disabled until step #10 has completed.
On the Desktop, select and open your boot volume. This will open a finder window.
In the Finder window that just opened, select and open the System Folder.
In the System Folder finder window, select and open the Startup Items folder.
Drag the HP All-in-One Communications icon from the Startup Items folder to the Trash.
Drag the new HP All-in-One Communications icon delivered in this package and place it in the Startup Items folder.
Shutdown the Mac.
Power on the LaserJet.
Power on the Mac.

This download package contains HP LaserJet Mac OS X Installer with updated PPD and PDE (Univeral Binary) files. Full printing support for Mac OS X v10.2.8, v10.3, v10.4 PPC and Intel processor Macs is included with this download.

This download package contains HP LaserJet Mac OS X Installer with updated PPD and PDE (Univeral Binary) files. Full printing support for Mac OS X v10.2.8, v10.3, v10.4 PPC and Intel processor Macs is included with this download.

Hewlett Packard LasererJet and Edgeline Universal Print Driver Only for Mac OS X 10.5

Hewlett Packard LasererJet and Edgeline Universal Print Driver Only for Mac OS X 10.5

NOTE: This is a Mac OS X v10.2.3 and later (Jaguar) software update for the HP LaserJet 1220 All-in-One. This is not a full installation of the software. In order to use this software download, you must already have installed version 4.0.7 of the HP All-in-One software. Refer to the Readme file for additional instructions on determining the version of the HP All-in-One software installed.
The software version contained in this download package has the following new or updated features:
Native Mac OS X v10.2.3 or 10.2.4 support for the 1220

How to Apply This Software Update
Below are easy-to-follow instructions for downloading and installing your Mac OS X v10.2 software update.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then the computer.
Close any screen savers, virus protection programs or other software programs that are running on your computer.
Download the file to your hard drive.
Expand the file by finding the directory where the file was saved. Double click on the file.
Upgrading from a Mac OS X version 10.1.x system
If you are upgrading your system from OS X v10.1.x to OS X v10.2 (Jaguar), you should uninstall the HP All-in-One software prior to upgrading the operating system. This can be done by launching the uninstaller located at /Applications/HP All-In-One Software/HP AIO Uninstaller. Once the HP All-in-One software has been removed, upgrade the operating system as recommended by Apple and follow the steps in the next section: Installing on a Mac OS X v10.2 (Jaguar) system.
Installing on a Mac OS X v 10.2 (Jaguar) system
To install the software for your HP LaserJet All-in-One on a Mac OS X v10.2 (Jaguar) system follow these steps:
Verify you are using Mac OS X v10.2.3 or 10.2.4 only.
Verify you have version 4.0.7 of the HP LaserJet All-in-One software previously installed. Refer to the Readme for instructions on determining software version.
Close the HP All-in-One Setup Assist by choosing HP Setup Assistant->Quit HP Setup Assistant from the file menu.
Launch Print Center from /Applications/Utilities/Print Center
Select and delete the version 4.0.7 print queue if it exists. It can be identified by the name HP LaserJet 1220 (Printer)
Quit Print Center
Run the update installer you downloaded.
After entering the administrator credentials, choose to install on the installer UI.
When prompted, choose to restart the computer.
After the computer restarts, the HP All-in-One Setup Assist should launch. If it does not, launch it manually from the location, /Applications/HP All-in-One Software/HP All-in-One Setup Assist
Complete the steps in the HP All-in-One Setup Assist application as prompted.
Open /Applications/Utilities/Print Center and verify print queue has been created. The correct print queue should contain the suffix "(Printer)". If the queue is not listed, refer to the Readme on "How to Configure a Print".
In Print Center, highlight the print queue from step 12 and choose Make Default
Quit Print Center.

NOTE: This is a Mac OS X v10.2.3 and later (Jaguar) software update for the HP LaserJet 1220 All-in-One. This is not a full installation of the software. In order to use this software download, you must already have installed version 4.0.7 of the HP All-in-One software. Refer to the Readme file for additional instructions on determining the version of the HP All-in-One software installed.
To order a copy of the CD with the latest version of the software, please visit our CD-ROM order page.

The software version contained in this download package has the following new or updated features:
Native Mac OS X v10.2.3 or 10.2.4 support for the 1220

How to Apply This Software Update
Below are easy-to-follow instructions for downloading and installing your Mac OS X v10.2 software update.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then the computer.
Close any screen savers, virus protection programs or other software programs that are running on your computer.
Download the file to your hard drive.
Expand the file by finding the directory where the file was saved. Double click on the file.
Upgrading from a Mac OS X version 10.1.x system
If you are upgrading your system from OS X v10.1.x to OS X v10.2 (Jaguar), you should uninstall the HP All-in-One software prior to upgrading the operating system. This can be done by launching the uninstaller located at /Applications/HP All-In-One Software/HP AIO Uninstaller. Once the HP All-in-One software has been removed, upgrade the operating system as recommended by Apple and follow the steps in the next section: Installing on a Mac OS X v10.2 (Jaguar) system.
Installing on a Mac OS X v 10.2 (Jaguar) system
To install the software for your HP LaserJet All-in-One on a Mac OS X v10.2 (Jaguar) system follow these steps:
Verify you are using Mac OS X v10.2.3 or 10.2.4 only.
Verify you have version 4.0.7 of the HP LaserJet All-in-One software previously installed. Refer to the Readme for instructions on determining software version.
Close the HP All-in-One Setup Assist by choosing HP Setup Assistant->Quit HP Setup Assistant from the file menu.
Launch Print Center from /Applications/Utilities/Print Center
Select and delete the version 4.0.7 print queue if it exists. It can be identified by the name HP LaserJet 1220 (Printer)
Quit Print Center
Run the update installer you downloaded.
After entering the administrator credentials, choose to install on the installer UI.
When prompted, choose to restart the computer.
After the computer restarts, the HP All-in-One Setup Assist should launch. If it does not, launch it manually from the location, /Applications/HP All-in-One Software/HP All-in-One Setup Assist
Complete the steps in the HP All-in-One Setup Assist application as prompted.
Open /Applications/Utilities/Print Center and verify print queue has been created. The correct print queue should contain the suffix "(Printer)". If the queue is not listed, refer to the Readme on "How to Configure a Print".
In Print Center, highlight the print queue from step 12 and choose Make Default
Quit Print Center.

The download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

The OS Driver Bundles contain PCL 5e, PCL 6, and Postscript drivers only for the Windows 2000/XP operating systems. The drivers are also available, individually, from the product specific download pages.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

The OS Driver Bundles contain PCL 5e, PCL 6, and Postscript drivers only for the Windows 2000/XP operating systems. The drivers are also available, individually, from the product specific download pages.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.

Download Info

Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1116, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.

Important Information
Internet enabled supplies ordering for direct connect to your PC is included in the Printer Status and Alerts software. After reviewing or being alerted to your supplies status, you can order your supplies on-line.
You will need to install the Printer Status and Alerts software once on each computer for all supported HP LaserJet printers to be connected. Not all printers are supported in each software. Please read the
Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.

Download Info

Below are easy-to-follow instructions for downloading and installing the Printer Status/Alerts and Internet Enabled Supplies Ordering software.
Before proceeding with the software installation, the printer must first be properly set up, the printer drivers must already be installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1116, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for "Display status window when." We suggest you select all of the options for Printer Status/Alerts.
You only need to install this software once on each computer for all supported HP printers connected, either on the network or direct.
Open the "Printer Status and Alerts" software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.

Important Information

Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.

Download Info

Below are easy-to-follow instructions for downloading and installing the Screen Reader Accessibility for Status and Alerts software.
Before proceeding with the software installation, the printer must first be properly set up, and the printer drivers must be already installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1117, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for 'Display status window when.' We suggest you select all of the options for Screen Reader Accessibility.
You only need to install this software once on each computer for all HP LaserJet printers connected, either on the network or direct.
Open the 'Job Status and Alerts' software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.

Important Information

Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.

Download Info

Below are easy-to-follow instructions for downloading and installing the Screen Reader Accessibility for Status and Alerts software.
Before proceeding with the software installation, the printer must first be properly set up, and the printer drivers must be already installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1117, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for 'Display status window when.' We suggest you select all of the options for Screen Reader Accessibility.
You only need to install this software once on each computer for all HP LaserJet printers connected, either on the network or direct.
Open the 'Job Status and Alerts' software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.

Important Information

Some printers may experience slower performance due to the different ways that some computers and printers handle bi-directional communication of the parallel (LPT) interface. Some larger, more complex jobs may need more time to process and print due to the increased communication traffic over the parallel interface.


Download Info

Below are easy-to-follow instructions for downloading and installing the Screen Reader Accessibility for Status and Alerts software.
Before proceeding with the software installation, the printer must first be properly set up, and the printer drivers must be already installed, and your computer must be ready to print.
Download the file to a folder on your hard drive.
Close any screen savers, virus protection programs, or any other software programs that are running on your computer.
Go to the folder where you downloaded the software and double click the file to extract the files.
Go to the folder where these files were extracted to, for example c:\lj1117, and double click on the setup.exe file to start the installation process. During the install process you will be asked to select options for 'Display status window when.' We suggest you select all of the options for Screen Reader Accessibility.
You only need to install this software once on each computer for all HP LaserJet printers connected, either on the network or direct.
Open the 'Job Status and Alerts' software. We suggest you review each of the options for status and alerts and select the ones you wish to receive for your printer.

HP LaserJet 1200/1220 (lj2100 series) PCL5e Driver v2.1.0.0, Windows 3.1.

HP LaserJet 1200/1220 (lj2100 series) PCL5e Driver v2.1.0.0, Windows 3.1.

HP LaserJet 1200/1220 (lj2100 series) PCL5e Driver v2.1.0.0, Windows 3.1.

HP LaserJet 1200/1220 (lj2100 series) PCL5e Driver v2.1.0.0, Windows 3.1.

The Point and Print Driver Bundles contain PCL 5e drivers only, for the Windows 2000, 2003, Windows XP, Windows NT4.0, and Windows 95/98/Me operating systems. These bundles allow for Point and Print interaction among the different OS's. The drivers are also available, individually, from the product specific download pages.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

The Point and Print Driver Bundles contain PCL 5e drivers only, for the Windows 2000, 2003, Windows XP, Windows NT4.0, and Windows 95/98/Me operating systems. These bundles allow for Point and Print interaction among the different OS's. The drivers are also available, individually, from the product specific download pages.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

The Point and Print Driver Bundles contain Postscript drivers only, for the Windows 2000, Windows XP, Windows NT4.0, and Windows 95/98/Me operating systems. These bundles allow for Point and Print interaction among the different OS's. The drivers are also available, individually, from the product specific download pages.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj1023). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj203).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

The Point and Print Driver Bundles contain Postscript drivers only, for the Windows 2000, Windows XP, Windows NT4.0, and Windows 95/98/Me operating systems. These bundles allow for Point and Print interaction among the different OS's. The drivers are also available, individually, from the product specific download pages.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj1023). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj203).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\lj987). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\lj206).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Enhancements

HP LaserJet 1220 software update addresses the following issue.
This is a software update for the HP LaserJet 1220, this is not a full installation of the printing software. In order to use this software download you must already have installed the full software from your in-box CD.

Version 6.0
Includes all enhancements provided with version 1.1.
Corrects an application error when launching the Scan Control Viewer on a Traditional Chinese operating system.
Corrects an application error when launching the Document Manager on Windows XP.
The Archive button on the HP LaserJet Director responds to button presses.
Scan Control Viewer now allows zooming to entire scanned area.
Version 1.1
Corrects all issues addressed with Version 1.0 listed below for either version 2 or version 3 of the LaserJet 1220 software.
Version 1.0
Corrects some instances of “Error writing to LPT1”
Prevents some scanned documents from being altered by providing functionality that allows the user to disable analysis. For further details on turning analysis on or off, refer to the “readme” file.
Allows the user to scan pages longer than 11 inches.
Prevents missing pages when scanning multi-page documents.
Resolves scanning problem which caused bottom one inch to be lost (non-TWAIN scans).
Fixes some “missing DLL” error messages.
Corrects abnormal naming of temporary files.
User-selected default file format is retained when scanning to email using LaserJet Director.

Download Info

This section will help you download the software to your computer and start you on the install process.
To download into a temporary, default directory on your PC, click on the lj629 file below. Note the directory and path where the file is saved to. You will need to access this file on your PC.
To expand (unzip) this file select Start/Run on your PC; Select Browse and find the directory where the file was saved to. Click on the file, select Open and then ok.
Please note that this file will create and extract into a default directory on your hard drive.

Important Information
This version of the HP LaserJet Windows XP Communications Patch supportsWindows XP 32-bit only.
This is a software update for the LJ1200/LJ1220/LJ2200/LJ3200, thisis not a full installation of the printing software. In order to use thissoftware download you must already have installed the full software versionfrom your in-box CD.
This patch addresses communication issues on Windows XP 32-bit OperatingSystems.
These communication issues could result in not being able to print,scan, or fax after installing the printer software from the CD and selectingLPT1 or USB.

Download Info
This section will help you download the software to your computer andstart you on the install process.

To download into a temporary directory (a default directory on your PC)click on the file below. Note the directory and path where the fileis saved. You will need to access this file on your PC.

Run the file to begin fixing your system.

Important Information
This version of the HP LaserJet Windows XP Communications Patch supportsWindows XP 32-bit only.
This is a software update for the LJ1200/LJ1220/LJ2200/LJ3200, thisis not a full installation of the printing software. In order to use thissoftware download you must already have installed the full software versionfrom your in-box CD.
This patch addresses communication issues on Windows XP 32-bit OperatingSystems.
These communication issues could result in not being able to print,scan, or fax after installing the printer software from the CD and selectingLPT1 or USB.

Download Info
This section will help you download the software to your computer andstart you on the install process.

To download into a temporary directory (a default directory on your PC)click on the file below. Note the directory and path where the fileis saved. You will need to access this file on your PC.

Run the file to begin fixing your system.

Important Information
This version of the HP LaserJet Windows XP Communications Patch supportsWindows XP 32-bit only.
This is a software update for the LJ1200/LJ1220/LJ2200/LJ3200, thisis not a full installation of the printing software. In order to use thissoftware download you must already have installed the full software versionfrom your in-box CD. To order a copy of the CD with the latest versionof the software please visit our CD-ROMsite.
This patch addresses communication issues on Windows XP 32-bit OperatingSystems.
These communication issues could result in not being able to print,scan, or fax after installing the printer software from the CD and selectingLPT1 or USB.


Download Info
This section will help you download the software to your computer andstart you on the install process.
Â
To download into a temporary directory (a default directory on your PC)click on the file below. Note the directory and path where the fileis saved. You will need to access this file on your PC.
Â
Run the file to begin fixing your system.