Hewlett Packard HP Color LaserJet 4730xm MFP > Download Drivers, Utilities and Firmware

HP color LaserJet installer for Mac OS 9.

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj4650_1_1.rfu -- A simulation of the HP CLJ4650 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj4500_1_1.rfu -- A simulation of the HP CLJ4500 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj9500_1_1.rfu -- A simulation of the HP CLJ9500 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj5550_1_1.rfu -- A simulation of the HP CLJ5550 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_reset_1_1.rfu -- Use this table to return the printer to its original state.
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

This Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.
This document provides specific update, installation and troubleshooting information.
What is included in a Remote Firmware Update (RFU)?
The HP LaserJet Printer Remote Firmware Update file contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded.
Who needs this firmware?
Similar to Hewlett Packard providing improved software for your HP LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below.
Determining the current version level of your firmware
To determine the current level of firmware installed on the device:
Go to the printer's control panel.
Press the green checkmark button.
Use the arrow keys and select the "INFORMATION" selection on the control panel.
Use the arrow keys and select the "PRINT CONFIGURATION" selection.
Press the green checkmark button to print the Configuration Page.
On the printed CONFIGURATION page look in the section marked "Device Information" for the firmware date code. The firmware date code will look something like this: 20060526 46.131.7

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj9500_1_1.rfu -- A simulation of the HP CLJ9500 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj5550_1_1.rfu -- A simulation of the HP CLJ5550 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj4650_1_1.rfu -- A simulation of the HP CLJ4650 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj4500_1_1.rfu -- A simulation of the HP CLJ4500 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_reset_1_1.rfu -- Use this table to return the printer to its original state.
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

This Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.
This document provides specific update, installation and troubleshooting information.
What is included in a Remote Firmware Update (RFU)?
The HP LaserJet Printer Remote Firmware Update file contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded.
Who needs this firmware?
Similar to Hewlett Packard providing improved software for your HP LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below.
Determining the current version level of your firmware
To determine the current level of firmware installed on the device:
Go to the printer's control panel.
Press the green checkmark button.
Use the arrow keys and select the "INFORMATION" selection on the control panel.
Use the arrow keys and select the "PRINT CONFIGURATION" selection.
Press the green checkmark button to print the Configuration Page.
On the printed CONFIGURATION page look in the section marked "Device Information" for the firmware date code. The firmware date code will look something like this: 20060526 46.131.7

HP Color LaserJet installer for Mac OS X v10.2.8, 10.3, 10.4

The download package contains HP LaserJet Mac OS X Installer with Printer Utility Software Solution v7.8.0.761. Included are the HP Mac driver files (v4.3.1) and HP Printer Utility for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP Color LaserJet 3000
HP Color LaserJet 3800
HP Color LaserJet 4700
HP Color LaserJet 4730mfp
HP Color LaserJet CP4005
HP Color LaserJet CP6015
HP LaserJet P3004
HP LaserJet P3005
HP LaserJet 5200
HP LaserJet 5200L
HP LaserJet M3027 mfp
HP LaserJet M3035 mfp
HP LaserJet M4345 mfp
HP LaserJet M5025 mfp
HP LaserJet M5035 mfp

The HP color LaserJet 4730mfp ICC profiles may be used when color management is desired, either in the operating system or in an application. For most uses, the RGB profile will offer the best color. One exception is that Windows 98 and Millennium require a CMYK profile for PostScript printers. RGB data may be sent to the printer through a PCL or a PostScript driver. CMYK data can be sent only through a PostScript driver. The default CMYK mode is a SWOP press emulation.

The HP color LaserJet 4730mfp ICC profiles may be used when color management is desired, either in the operating system or in an application. For most uses, the RGB profile will offer the best color. One exception is that Windows 98 and Millennium require a CMYK profile for PostScript printers. RGB data may be sent to the printer through a PCL or a PostScript driver. CMYK data can be sent only through a PostScript driver. The default CMYK mode is a SWOP press emulation.

Classic print support for Mac OS X v10.2, 10.3, 10.4.

Note: You must install the Mac OS X driver prior to installing Classic support .

Applications Supported
ApplicationSoftware VersionExtension
Adobe® Illustrator®9*, 10, CS, CS2.ai
Adobe® Photoshop®6*, 7, CS, CS2.aco
Adobe® InDesign®2.01, CS, CS2.ai
Macromedia® FreeHand®10, MXbcf & .acf
CorelDRAW® Graphics ** 10, 11, 12pal & .cpl
Corel® DESIGNER® ** 10, 11, 12.pal, cpl & .pl4
QuarkXPress®4.11, 5, 6.qxd
EPS Charts.eps
TIFF Charts.tiff
Text Format.txt
Adobe® Acrobat® Readerpdf

* Adobe Photoshop 6.0 & Adobe Illustrator 9.0 will require you to run in Mac OS X Classic Mode.
**CorelDRAW & DESIGNER will not be supported for MAC OS.

Mac OS X v10.5 'Leopard' customers - the latest HP driver software for this printer is built into Leopard. You do not need to download or reinstall any HP software.
Note: This assumes the HP driver set was installed as part of the default Leopard install. If not, you can 'Custom' install from the Leopard DVD to install the full HP driver set.
HP Printer Setup Instructions for the New Mac OS X v10.5 Leopard
If you're updating from Mac OS X v10.2, v10.3, or v10.4 to new Mac OS X v10.5 Leopard:
USB connection: If your HP printer is connected via USB, the Leopard OS install will automatically update your printer queue with the latest HP driver.
Network connection: If your HP printer is connected via Ethernet or Wireless network, the Leopard install will automatically delete all networked printer queues. After install you'll need to Open System Preferences, Print & Fax, to add your printer and create a new HP printer queue.
Bonjour: If you have only one printer queue that was created via Bonjour, including printer connected to USB port on Airport Extreme/Express Base Station, this printer queue should be automatically recreated as part of the Leopard OS install.
Note: this process only works if there is just one printer queue. If there are multiple printer queues, please refer to step B, above.
New Mac with Mac OS X v10.5 or a clean install of the Leopard OS:
USB connection: Make sure your printer is turned on and connected. a printer queue should be automatically created for your HP printer.
Network printers: After install you'll need to Open System Preferences, Print & Fax, to add your printer and create a new HP printer queue.
Apple Software Updates: HP drivers will be available via Apple Software updates. Please note that the Apple software update process for HP drivers only applies to USB connected printers.
USB connection: You must have a printer connected via USB or a previous USB HP printer queue to enable software updates to download the latest HP printer driver for your specific HP printer.
Network connection: You must install the HP driver set from the Leopard DVD to get the latest HP driver set. Apple software update process will not be able to find and download the driver for your specific networked printer queue without it.

Applications Supported
ApplicationSoftware VersionExtension
Adobe® Illustrator®9*, 10, CS, CS2.ai
Adobe® Photoshop®6*, 7, CS, CS2.aco
Adobe® InDesign®2.01, CS, CS2.ai
Macromedia® FreeHand®10, MXbcf & .acf
CorelDRAW® Graphics ** 10, 11, 12pal & .cpl
Corel® DESIGNER® ** 10, 11, 12.pal, cpl & .pl4
QuarkXPress®4.11, 5, 6.qxd
EPS Charts.eps
TIFF Charts.tiff
Text Format.txt
Adobe® Acrobat® Readerpdf

* Adobe Photoshop 6.0 & Adobe Illustrator 9.0 will require you to run in Mac OS X Classic Mode.
**CorelDRAW & DESIGNER will not be supported for MAC OS.

Classic print support for Mac OS X v10.2, 10.3, 10.4.

Note: You must install the Mac OS X driver prior to installing Classic support .

HP Color LaserJet installer for Mac OS X v10.2.8, 10.3, 10.4

The HP color LaserJet 4730mfp ICC profiles may be used when color management is desired, either in the operating system or in an application. For most uses, the RGB profile will offer the best color. One exception is that Windows 98 and Millennium require a CMYK profile for PostScript printers. RGB data may be sent to the printer through a PCL or a PostScript driver. CMYK data can be sent only through a PostScript driver. The default CMYK mode is a SWOP press emulation.

The HP color LaserJet 4730mfp ICC profiles may be used when color management is desired, either in the operating system or in an application. For most uses, the RGB profile will offer the best color. One exception is that Windows 98 and Millennium require a CMYK profile for PostScript printers. RGB data may be sent to the printer through a PCL or a PostScript driver. CMYK data can be sent only through a PostScript driver. The default CMYK mode is a SWOP press emulation.

This download package contains HP LaserJet Mac OS X Installer with updated PPD and PDE (Univeral Binary) files. Full printing support for Mac OS X v10.2.8, v10.3, v10.4 PPC and Intel processor Macs is included with this download.

The configuration utility is used for pre configuring the Printer drivers by modifying the cfg file. This utility is used across Printer driver platforms including HP's Product Specific Drivers as well as HP's Universal Print Driver and any other concerned party drivers.

The configuration utility is used for pre configuring the Printer drivers by modifying the cfg file. This utility is used across Printer driver platforms including HP's Product Specific Drivers as well as HP's Universal Print Driver and any other concerned party drivers.

This document provides some general information about the Send Fax driver that is used with the HP LaserJet MFP Analog Fax Accessory 300 (product number: Q3701A) when it is installed in specific multifunction peripherals (MFPs).
The fax accessory might be factory installed (bundled) or could be installed as an accessory, depending on the MFP model. See Supported MFPs and minimum firmware for the list of MFPs that this driver supports.

This document provides some general information about the Send Fax driver that is used with the HP LaserJet MFP Analog Fax Accessory 300 (product number: Q3701A) when it is installed in specific multifunction peripherals (MFPs).
The fax accessory might be factory installed (bundled) or could be installed as an accessory, depending on the MFP model. See Supported MFPs and minimum firmware for the list of MFPs that this driver supports.

This is a monochrome driver for printing with black only without greyscale.
The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This is a monochrome driver for printing with black only without greyscale.
The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista
Windows XP
Windows Server 2003
Windows 2000
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This download is only for 64-bit "Itanium" editions of Microsoft 64 bit operating systems. It will not work on "x64" editions

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\clj4730mfp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj4730mfp).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

This download is only for "Itanium" editions of Microsoft 64 bit operating systems. It will not work on "x64" editions

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\clj4730mfp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj4730mfp).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

This download is only for "Itanium" editions of Microsoft 64 bit operating systems. It will not work on "x64" editions
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\clj4730mfp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj4730mfp).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

This download is only for "Itanium" editions of Microsoft 64 bit operating systems. It will not work on "x64" editions
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\clj4730mfp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj4730mfp).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

This download is only for 64-bit "Itanium" editions of Microsoft 64 bit operating systems. It will not work on "x64" editions
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\clj4730mfp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj4730mfp).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

This download is only for "Itanium" editions of Microsoft 64 bit operating systems. It will not work on "x64" editions

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\clj4730mfp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj4730mfp).
Click on the file ending with .inf .
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

This document provides some general information about the Send Fax driver that is used with the HP LaserJet MFP Analog Fax Accessory 300 (product number: Q3701A) when it is installed in specific multifunction peripherals (MFPs).
The fax accessory might be factory installed (bundled) or could be installed as an accessory, depending on the MFP model. See Supported MFPs and minimum firmware for the list of MFPs that this driver supports.

This download is only for Windows XP Professional x64 operating systems. It will not work on "Itanium" editions

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

This is monochrome driver for printing with black without greyscaling.
The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This download is only for Windows XP Professional x64 operating systems. It will not work on "Itanium" editions.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This download is only for Windows XP Professional x64 operating systems. It will not work on "Itanium" editions.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This download is only for Windows XP Professional x64 operating systems. It will not work on "Itanium" editions

The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

This is monochrome driver for printing with black without greyscaling.
The Readme file provides specific information you should know before you install and use the Printing System. Information and are provided for the following operating systems:
Windows Vista (64-bit)
Windows XP x64 Edition
Windows Server 2003 x64 Edition
The Readme file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer use guide.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.

This document provides some general information about the Send Fax driver that is used with the HP LaserJet MFP Analog Fax Accessory 300 (product number: Q3701A) when it is installed in specific multifunction peripherals (MFPs).
The fax accessory might be factory installed (bundled) or could be installed as an accessory, depending on the MFP model. See Supported MFPs and minimum firmware for the list of MFPs that this driver supports.

Applications Supported
ApplicationSoftware VersionExtension
Adobe® Illustrator®9*, 10, CS, CS2.ai
Adobe® Photoshop®6*, 7, CS, CS2.aco
Adobe® InDesign®2.01, CS, CS2.ai
Macromedia® FreeHand®10, MXbcf & .acf
CorelDRAW® Graphics ** 10, 11, 12pal & .cpl
Corel® DESIGNER® ** 10, 11, 12.pal, cpl & .pl4
QuarkXPress®4.11, 5, 6.qxd
EPS Charts.eps
TIFF Charts.tiff
Text Format.txt
Adobe® Acrobat® Readerpdf

* Adobe Photoshop 6.0 & Adobe Illustrator 9.0 will require you to run in Mac OS X Classic Mode.
**CorelDRAW & DESIGNER will not be supported for MAC OS.

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj9500_1_1.rfu -- A simulation of the HP CLJ9500 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj5550_1_1.rfu -- A simulation of the HP CLJ5550 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj4650_1_1.rfu -- A simulation of the HP CLJ4650 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj4500_1_1.rfu -- A simulation of the HP CLJ4500 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?
The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_reset_1_1.rfu -- Use this table to return the printer to its original state.
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj9500_1_1.rfu -- A simulation of the HP CLJ9500 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj5550_1_1.rfu -- A simulation of the HP CLJ5550 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj4650_1_1.rfu -- A simulation of the HP CLJ4650 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_clj4500_1_1.rfu -- A simulation of the HP CLJ4500 series printers in their default state. Version 1.1
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500_1_1.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

WHAT IS INCLUDED IN A REMOTE CUSTOM COLOR TABLE UPGRADE?

The CLJ Custom Color Table Remote Upgrade file contains a custom color table. When the Remote Custom Color Table Upgrade file is sent to the printer, the printer's custom color table is upgraded. The printer's firmware and all paper handling accessory's firmware is not modified.
TABLES PROVIDED WITH THIS UPDATE

clj4730mfp_reset_1_1.rfu -- Use this table to return the printer to its original state.
Files names are constructed as follows:
clj####_{what}_{ver}.rfu
Where:
clj#### is the printer model number the color table is for
{what} is a one word description of what the table will do
{ver} is a two part version number consisting of a major and minor value
ie. clj4730mfp_clj9500.rfu is an HP CLJ9500 emulation for the CLJ4730mfp version 1.1
Note: Ensure your printer model matches the model described in the filename.
Note: This update affects both the RGB and CMYK custom slots of your printer
While every care was taken to ensure a close match was made during the creation of these tables, there are several factors that can affect the outcome of the match including, but not limited to,
- differences between printers within and between a given model line
- the media type used
- the age and state of both printers being compared
- the use of non-HP supplies
- environmental conditions

To access the new table, be sure to select "Custom Profile" from the RGB and/or CMYK color options.
To check if a custom color table is being used, refer to the configuration page for a "@" mark next to the "Last DMax/DHalf:" line under the "Calibration Information" sub-section

Applications Supported
ApplicationSoftware VersionExtension
Adobe® Illustrator®9*, 10, CS, CS2.ai
Adobe® Photoshop®6*, 7, CS, CS2.aco
Adobe® InDesign®2.01, CS, CS2.ai
Macromedia® FreeHand®10, MXbcf & .acf
CorelDRAW® Graphics ** 10, 11, 12pal & .cpl
Corel® DESIGNER® ** 10, 11, 12.pal, cpl & .pl4
QuarkXPress®4.11, 5, 6.qxd
EPS Charts.eps
TIFF Charts.tiff
Text Format.txt
Adobe® Acrobat® Readerpdf

* Adobe Photoshop 6.0 & Adobe Illustrator 9.0 will require you to run in Mac OS X Classic Mode.
**CorelDRAW & DESIGNER will not be supported for MAC OS.

Applications Supported
ApplicationSoftware VersionExtension
Adobe® Illustrator®9*, 10, CS, CS2.ai
Adobe® Photoshop®6*, 7, CS, CS2.aco
Adobe® InDesign®2.01, CS, CS2.ai
Macromedia® FreeHand®10, MXbcf & .acf
CorelDRAW® Graphics ** 10, 11, 12pal & .cpl
Corel® DESIGNER® ** 10, 11, 12.pal, cpl & .pl4
QuarkXPress®4.11, 5, 6.qxd
EPS Charts.eps
TIFF Charts.tiff
Text Format.txt
Adobe® Acrobat® Readerpdf

* Adobe Photoshop 6.0 & Adobe Illustrator 9.0 will require you to run in Mac OS X Classic Mode.
**CorelDRAW & DESIGNER will not be supported for MAC OS.

This Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.
This document provides specific update, installation and troubleshooting information.
What is included in a Remote Firmware Update (RFU)?
The HP LaserJet Printer Remote Firmware Update file contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded.
Who needs this firmware?
Similar to Hewlett Packard providing improved software for your HP LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below.
Determining the current version level of your firmware
To determine the current level of firmware installed on the device:
Go to the printer's control panel.
Press the green checkmark button.
Use the arrow keys and select the "INFORMATION" selection on the control panel.
Use the arrow keys and select the "PRINT CONFIGURATION" selection.
Press the green checkmark button to print the Configuration Page.
On the printed CONFIGURATION page look in the section marked "Device Information" for the firmware date code. The firmware date code will look something like this: 20060526 46.131.7

This Readme file provides specific installation instructions and other information you should know before you perform a firmware update for your HP LaserJet Series printer. Installation instructions are provided for Single and Multiple Printer Updates.
This document provides specific update, installation and troubleshooting information.
What is included in a Remote Firmware Update (RFU)?
The HP LaserJet Printer Remote Firmware Update file contains firmware for the printer, embedded JetDirect (if applicable), HP paper handling accessories used with the device in one convenient download file. When the Remote Firmware Upgrade file is sent to the HP LaserJet Printer firmware for the engine and all connected accessories are upgraded.
Who needs this firmware?
Similar to Hewlett Packard providing improved software for your HP LaserJet Printer, Hewlett Packard provides firmware updates for your printer periodically through its supported lifecycle. A firmware update may be necessary if it is determined that you may benefit from the resolution of any issue that is documented below.
Determining the current version level of your firmware
To determine the current level of firmware installed on the device:
Go to the printer's control panel.
Press the green checkmark button.
Use the arrow keys and select the "INFORMATION" selection on the control panel.
Use the arrow keys and select the "PRINT CONFIGURATION" selection.
Press the green checkmark button to print the Configuration Page.
On the printed CONFIGURATION page look in the section marked "Device Information" for the firmware date code. The firmware date code will look something like this: 20060526 46.131.7

The HP color LaserJet 4730mfp ICC profiles may be used when color management is desired, either in the operating system or in an application. For most uses, the RGB profile will offer the best color. One exception is that Windows 98 and Millennium require a CMYK profile for PostScript printers. RGB data may be sent to the printer through a PCL or a PostScript driver. CMYK data can be sent only through a PostScript driver. The default CMYK mode is a SWOP press emulation.

The HP color LaserJet 4730mfp ICC profiles may be used when color management is desired, either in the operating system or in an application. For most uses, the RGB profile will offer the best color. One exception is that Windows 98 and Millennium require a CMYK profile for PostScript printers. RGB data may be sent to the printer through a PCL or a PostScript driver. CMYK data can be sent only through a PostScript driver. The default CMYK mode is a SWOP press emulation.

The HP color LaserJet 4730mfp ICC profiles may be used when color management is desired, either in the operating system or in an application. For most uses, the RGB profile will offer the best color. One exception is that Windows 98 and Millennium require a CMYK profile for PostScript printers. RGB data may be sent to the printer through a PCL or a PostScript driver. CMYK data can be sent only through a PostScript driver. The default CMYK mode is a SWOP press emulation.

The HP color LaserJet 4730mfp ICC profiles may be used when color management is desired, either in the operating system or in an application. For most uses, the RGB profile will offer the best color. One exception is that Windows 98 and Millennium require a CMYK profile for PostScript printers. RGB data may be sent to the printer through a PCL or a PostScript driver. CMYK data can be sent only through a PostScript driver. The default CMYK mode is a SWOP press emulation.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\clj4730mfp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj4730mfp).
Click on the file ending with .inf.
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.

Download Info

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the printer model that was downloaded (i.e., c:\clj4730mfp). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj4730mfp).
Click on the file ending with .inf.
Click Open and then Okay and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.