AboCom LF560MX Download Drivers

Available 1 files for LF560MX
Company
AboCom
Categories
Networks Cards
Model
AboCom LF560MX
Description
Drivers
Operating Systems
DOS NDIS2-Windows 95-98-98Se-Me-NT4-2000-XP
Version Driver
2.23
Size Driver
442Kb
File Name
lf560mx_v2.01.exe
Info
The 16-bit 10/100M Fast Ethernet + V.90 56K modem PC Card Contents

Introduction
PCMCIA Driver Installation
Getting Started
EMM386 Usage with LanModem
Driver Directory Structure
Support Options

The following is the important information of AboCom LF560MX installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the LF560MX model that was downloaded (for example c:\LF560MX). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card AboCom LF560MX in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which AboCom LF560MX Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "AboCom LF560MX"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your AboCom LF560MX.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for LF560MX has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by AboCom, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by AboCom for LF560MX.

AboCom LF560MX Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "AboCom LF560MX" then a properties page appears.


Available 1 Drivers

HelpDrivers Since March 2000