AboCom ULF560 Download Drivers

Available 2 files for ULF560
Company
AboCom
Categories
Networks Cards
Model
AboCom ULF560
Description
USB 10-100M Fast EtherNet + V.90 56K
Operating Systems
Windows 95-98-98Se-Me-NT4-2000-XP Netware ODI
Version Driver
2.0.1
Size Driver
442Kb
File Name
lf560mx_v2.01.exe
Company
AboCom
Categories
Networks Cards
Model
AboCom ULF560
Description
USB 10-100M Fast EtherNet + V.90 56K
Operating Systems
Windows 98-Me-2000-XP
Version Driver
2.0
Size Driver
220Kb
File Name
ulf560_v2.0.exe

The following is the important information of AboCom ULF560 installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the ULF560 model that was downloaded (for example c:\ULF560). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card AboCom ULF560 in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which AboCom ULF560 Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "AboCom ULF560"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your AboCom ULF560.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for ULF560 has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by AboCom, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by AboCom for ULF560.

AboCom ULF560 Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "AboCom ULF560" then a properties page appears.


Available 2 Drivers

HelpDrivers Since March 2000