Askey WLC0010 Download Drivers
Available 5 files for WLC0010
Company
Askey
Categories
Networks Cards
Model
Askey WLC0010
Description
Drivers
Operating Systems
Windows 2000
Size Driver
1.8Mb
File Name
wlc0010.zip
Info
How to use this WLC0010 Utility
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
Company
Askey
Categories
Networks Cards
Model
Askey WLC0010
Description
Drivers
Operating Systems
Windows 95
Size Driver
1.8Mb
File Name
wlc0010.zip
Info
How to use this WLC0010 Utility
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
Company
Askey
Categories
Networks Cards
Model
Askey WLC0010
Description
Drivers
Operating Systems
Windows 98
Size Driver
1.8Mb
File Name
wlc0010.zip
Info
How to use this WLC0010 Utility
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
Company
Askey
Categories
Networks Cards
Model
Askey WLC0010
Description
Drivers
Operating Systems
Windows Me
Size Driver
1.8Mb
File Name
wlc0010.zip
Info
How to use this WLC0010 Utility
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
Company
Askey
Categories
Networks Cards
Model
Askey WLC0010
Description
Drivers
Operating Systems
Windows XP
Size Driver
1.8Mb
File Name
wlc0010.zip
Info
How to use this WLC0010 Utility
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
-------------------------------
For Windows ME:
1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.
2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.
4. You can remove WLAN utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.
For Windows 2000/XP:
1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.
2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.
b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.
