Aten MB432 Download Drivers

Normally any serial and parallel I/O ports can be supported by BIOS call
services in DOS environment. However there are only support 4 serial ports
(3F8h,2F8h,3E8h,,2E8h) and 3 parallel ports (3BCh/378h/278h) are supported
by BIOS/DOS.

If the user has more than one PCI-Card in the Slots, the dos driver
pcidos.exe remap the first ports, that found on the PCI-Slots. If the user wish
to remap ports of another PCI-Card, the Cards in the slots must
changed.

In case the PCI serial and parallel ports are different from the
above configurations (e.g. I/O address or more than 4 serial ports / 3
parallel ports), they are not supported by BIOS/DOS directly. However some
applications (e.g. "PComm Plus" could support 8 serial ports and each I/O
address is settable) have their own driver, thus PCI cards could
work correctly.

The following procedures will instruct you to install PCI serial
and parallel port device driver for DOS and Windows 3.1

This disk contains EX-WARE for MB-432 and MB-418 EX/NET.
Directories 'MB432' and 'MB418' are DOS version software control
utilities, and 'WIN' is WINDOW version. Utilities of either version
or both can be installed to your hard disk. Following examples install
from drive 'D:' to drive 'C:'.

For models : MB-432
. To install DOS version EX-WARE for MB-432
--- Put CD into drive 'D'.
- C:
- CD \
- MD EX
- COPY D:\printer.net\MB418-432\MB432\*.* C:\EX

. To install WINDOW version EX-WARE (if C:\WINDOWS has your Window system)
--- Put CD into drive 'D'.
- D:
- CD \pirnter.net\MB418-432\WIN
- INST_W C:\WINDOWS

For models : MB-418
. To install DOS version EX-WARE for MB-418
--- Put CD into drive 'D'.
- C:
- CD \
- MD EX
- COPY D:\print.net\MB418-432\MB418\*.* C:\EX

. To install WINDOW version EX-WARE (if C:\WINDOWS has your Window system)
--- Put CD into drive 'D'.
- D:
- CD \printer.netMB418-432\WIN
- INST_W C:\WINDOWS