Available 1 files for Micronet SP162T

Company

Micronet

Categories

Networks Cards

Model

Micronet SP162T

Description

Drivers

Operating System

MS-Dos-Windows 95-98

Size Driver

292KB

File Name

sp162t.zip

Observations

PCMCIA 10/100 Ethernet Card
Driver Diskette (Ver 2.00) Overview

TOPIC
======================================
1. DISKETTE CONTENTS
2. CLIENT DRIVER
3. SOCKET and CARD SERVICES INSTALLATION ADVISORY
4. DIAGNOSTIC PROGRAM
5. NETWARE DOS ODI DRIVER
6. PACKET DRIVER
7. NDIS2 DRIVER FOR WINDOWS FOR WORKGROUPS 3.11
8. NDIS DRIVER FOR LAN MANAGER V2.1
9. NDIS 3.1 DRIVER FOR WINDOWS 95
10. NDIS 3.1 DRIVER FOR WINDOWS NT 3.51
11. NDIS 3.1 DRIVER FOR WINDOWS NT 4.0
12. NDIS 5.0 DRIVER FOR WINDOWS 98
13. NDIS 5.0 DRIVER FOR WINDOWS 2000
14. NDIS 5.0 DRIVER FOR WINDOWS Me
15. DRIVER FOR LINUX

[1] DISKETTE CONTENTS
Files and
Subdirectories Contents
--------------------------------------------------------------------
\IN0100AF Tag File
\README.TXT This file
\DIAG.EXE PCMCIA Card Diagnostic Program
\INSTALL.EXE PCMCIA Installation Program
\CARDGO.EXE PCMCIA Client Driver
\IN0100AF.INF Windows 98/Me/2000 Installation File
\PMNDIS5.sys Windows NDIS5 device driver
\NETWARE.ODI Directory of Novell Netware DOS ODI Driver
\PKTDRV Directory of FTP Compliant Packet Driver Directory
\NDIS2 Directory of NDIS V2.0 Driver
\WFW311 Directory of NDIS V2.0 Enhance Mode Driver for WFW311
\MSLANMAN.DOS Directory of NDIS V2.0 Driver for Lan Manager V2.1
\LANTASTI.V60 Directory of NDIS V2.0 Driver for Lantastic V6.0
\WINNT351 Directory of NDIS V3.1 Driver for Windows NT 3.51
\WINNT40 Directory of NDIS V3.1 Driver for Windows NT 4.0
\WIN95 Directory of NDIS V3.1 Driver for Windows 95
\LINUX Directory of Linux Driver
[2] ClIENT DRIVER (For DOS and Windows 3.1 Only)

The Client Driver is a PCMCIA controller enable program. This enable
program only need for DOS and Windows 3.1 system.
To load the client driver, type

CARDGO [/IRQ=x][/IO=xxx][/MEM=xxxx][/?]

in DOS command line, or

DEVICE=[PATHNAME]CARDGO.EXE [/IRQ=x][/IO=xxx][/MEM=xxxx]

in config.sys file.

where:

[/IRQ=x] This specifies the hardware interrupt (IRQ) where your
card will be indicated.
The valid IRQs are 3,4,5,9,10,11.

[/IO=xxx] This specifies the I/O address. The valid ports are 300,
320,340,360,240,280

[/MEM=xxxx] This specifies the memory window address. The valid
MEMs are D000, D400, D800, DC00.