Ngs Technology Cadboy Download Drivers

Available 3 files for Cadboy
Company
Ngs Technology
Categories
Networks Cards
Model
Ngs Technology Cadboy
Description
Drivers
Operating Systems
Windows 7
Size Driver
4.01Mb
File Name
cadboy_vwindows_seven.zip
Company
Ngs Technology
Categories
Networks Cards
Model
Ngs Technology Cadboy
Description
Drivers
Operating Systems
Windows Vista
Size Driver
1.60Mb
File Name
cadboy_vwindows_vista.zip
Company
Ngs Technology
Categories
Networks Cards
Model
Ngs Technology Cadboy
Description
Drivers
Operating Systems
Windows XP
Size Driver
1.60Mb
File Name
cadboy_vwindows_xp.zip

The following is the important information of Ngs Technology Cadboy installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the Cadboy model that was downloaded (for example c:\Cadboy). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Ngs Technology Cadboy in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Ngs Technology Cadboy Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Ngs Technology Cadboy"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Ngs Technology Cadboy.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for Cadboy has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Ngs Technology, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Ngs Technology for Cadboy.

Ngs Technology Cadboy Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Ngs Technology Cadboy" then a properties page appears.


Available 3 Drivers

HelpDrivers Since March 2000