Phoebe Micro PHWL11-AP Download Drivers and Manual

Available 5 files for PHWL11-AP
Company
Phoebe Micro
Categories
Networks Cards
Model
Phoebe Micro PHWL11-AP
Description
Atmel + Intersil RTW020
Operating Systems
Manual
Size Manual
674Kb
File Name
phwl11-ap_manual.zip
Info
802.11b
Company
Phoebe Micro
Categories
Networks Cards
Model
Phoebe Micro PHWL11-AP
Description
Atmel + Intersil RTW020
Operating Systems
Utility
Size Driver
2.01Mb
File Name
phwl11-ap_utility.zip
Info
802.11b
Company
Phoebe Micro
Categories
Networks Cards
Model
Phoebe Micro PHWL11-AP
Description
Drivers
Operating Systems
Windows 2000-XP
Size Driver
2Mb
File Name
rtw020.zip
Company
Phoebe Micro
Categories
Networks Cards
Model
Phoebe Micro PHWL11-AP
Description
Drivers
Operating Systems
Windows 95-98
Size Driver
2Mb
File Name
rtw020.zip
Company
Phoebe Micro
Categories
Networks Cards
Model
Phoebe Micro PHWL11-AP
Description
Drivers
Operating Systems
Windows Me
Size Driver
2Mb
File Name
rtw020.zip

The following is the important information of Phoebe Micro PHWL11-AP installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the PHWL11-AP model that was downloaded (for example c:\PHWL11-AP). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Phoebe Micro PHWL11-AP in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Phoebe Micro PHWL11-AP Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Phoebe Micro PHWL11-AP"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Phoebe Micro PHWL11-AP.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for PHWL11-AP has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Phoebe Micro, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Phoebe Micro for PHWL11-AP.

Phoebe Micro PHWL11-AP Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Phoebe Micro PHWL11-AP" then a properties page appears.


Available 5 Drivers and Manual

HelpDrivers Since March 2000