Chem Usa ChemBook 7000M Notebooks & Tablet PCs > Downloads Drivers, Utilities and BIOS

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

BIOS Updates

Version

R1.12

Size Driver

203KB

File Name

70mr112.exe

Observations

Recommended Flash EPROM (BIOS) Management & Updating Procedures
===================================================
Upon first use of the computer system:
1. Create a bootable system floppy diskette by typing [FORMAT A:/S] from
the DOS prompt without creating "AUTOEXEC.BAT" and "CONFIG.SYS" files.

2. Copy the extracted files to your new diskette.

3. Set SW1-1 and SW1-2 to On under the keyboard.

4. At the "A:\" prompt, type: [1100M] or [fp /m=110m 11mr127.bin] and then the key.

WARNING: If the Flash Memory Writer utility was not able to successfully
download a complete BIOS file, your system may not be able to boot up.
If this happens, your system will need service from your vendor.

5. Turn off your computer after successfully flashing the new BIOS.

6. Turn on your computer and hold down the key to enter BIOS setup.
You must select "Setup Default" to affect the new BIOS, then you may
set other items from the Menu.

7. Be sure to enable Plug and Play OS support if you are running Windows 95.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

Video Drivers - S3 Virge/MX+ 86x280

Operating System

OS/2 Warp

Version

5.00.04

Size Driver

1.1MB

File Name

s3mxos2.exe

Observations

OS/2 Video Device Driver for the S3 ViRGE,ViRGE/VX,ViRGE/DX,ViRGE/GX,ViRGE/GX2,M3/M5,M5+
Driver Version 5.00.04
This package contains an OS/2 graphics-accelerator device driver
supporting the ViRGE and ViRGE/VX chip sets from S3 Incorporated.

Important:

o "S3 DRV1" must be the label on the installation diskette in this
package. This label can be applied using the DOS or OS/2 LABEL
command. The installation will fail without this step.

o Read this entire document before beginning the device driver
installation.
1.0 Supported Features
_______________________

This ViRGE,ViRGE/VX,ViRGE/DX,ViRGE/GX,ViRGE/GX2,M3/M5,M5+ graphics-accelerator device driver provides seamless
support for accelerated display graphics and advanced color resolutions
when used with the minimum required video memory. It conforms to the
OS/2 32-bit, flat memory model and is designed to function as a
32-bit Presentation Manager graphics-display device driver under the
OS/2 32-bit graphics engine. This device driver supports setting
the refresh rate using the System - Settings notebook (page 2 of
the Screen tab) in the OS/2 System Setup folder, and monitor
detection using Display Data Channel (DDC) protocols.

1.1 Supported Resolutions

NOTES:

o Y = Supported; N/S = Not Supported.

o 1280x1024x24bpp is supported with the ViRGE/vX chip only.

o 1 MB only - 640x480x24 is supported for 1 MB memory
configuration only; for 2 MB and above, 32 bits per pixel (bpp)
is supported.

o S3 BIOS supports 800x600x16 with 1 MB; S3 OS/2 device driver
needs 2 MB of memory.

The 32 bpp device driver might need a large swap space on the
hard disk, for example, 15 MB.
2.0 Compatibility
__________________

This graphics-accelerator device driver is compatible with OS/2
2.11, and OS/2 Warp 3.0.

3.0 DDC Monitor Support
_______________________________________

VESA Display Data Channel (DDC) 1 and 2B protocols are supported,
allowing similarly enabled computers and operating system software
to identify the monitor and its capabilities. This device driver
automatically detects DDC monitor capabilities and sets the display
to the maximum refresh rate supported by the monitor. If, after
installing this device driver, you switch from a non-DDC monitor to
a DDC monitor or switch to a different DDC monitor, you must run the
DDC Display Setup program in the System Setup folder.

Use the following procedures when installing a DDC monitor.

1. Reset the display to the lowest refresh rate available. This
will prevent the system from attempting to display at a refresh
rate higher than that supported by the new monitor.

2. Shut down your system and install the new monitor.

3. Restart your system.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

Audio Drivers - ESS Technology, ESS 1879

Operating System

OS2 Warp

Version

v.2.12

Size Driver

335KB

File Name

1879os2.exe

Observations

The ES1879 AudioDrive OS/2 Driver Software Release incorporates
the following features.
Version 2.12 Features

ES938 support

An application, SPATIAL.EXE, is provided to control ES938 3D
Stereo Processor or the built-in Spatializer.
ES689/ES690 support

A /W:1 parameter can be added to the device driver line in
CONFIG.SYS to utilize ES689/ES690 for MIDI output.
Full-duplex capability

The OS/2 driver supports playing and recording simultaneously 2
wave files.
ESFM support

The OS/2 driver supports ESFM, ESS's advanced FM music synthesis
technology.
APM support

The OS/2 driver supports Advanced Power Management (APM). It is
recommended that users stop audio applications before putting
the system into Suspend mode. The ES1879 is put into local
power mode when all audio streams are closed. ES938 is also
powered down upon receiving Suspend message.
Hardware volume control support

The OS/2 driver supports hardware volume control. The volume
settings are passed to MMPM/2 via a daemon program,
ESDAEMON.EXE. The program will save the volume settings and
restore them on startup.

A /H:# parameter can be added to the device driver line in
CONFIG.SYS to specify the number of additional steps generated
by one hardware volume control interrupt. The default number is
zero. The maximum is 3.
BIOS audio volume control support

The driver checks the master volume before changing it in case
the BIOS or other application has modified it.
Device sharing between OS/2 and WIN-OS/2

The audio device can be shared between Windows applications and
OS/2 under an exclusive sharing arrangement. If the device is
not currently being used by an OS/2 application, when Windows
runs an audio application, Windows will own the audio device
until the Windows application (or session) is terminated. Then
ownership will pass to the next application requesting it (OS/2
or Windows). This all occurs while maintaining the state of the
device for all applications.

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

Mouse Driver

Operating System

Windows 95

Version

7.30

Size Driver

1MB

File Name

logitech.exe

Observations

Logitech Mouse Driver README TABLE OF CONTENTS

1. Loading Drivers Only
2. Uninstall Program
________________________________________

1. Loading Drivers Only

Using the Device Manager, which is accessed through the System
icon in the Windows 95 Control Panel, select the entry for the
mouse, go to the Driver page, and select Change Driver (or
Update Driver). Insert the driver disk and press the Have Disk
button when prompted.

If you are using the OSR2.x version of Windows 95, follow the
Update Device Driver Wizard to install the driver.

2. Uninstall Program

MouseWare can be removed from Windows 95 by clicking the
Add/Remove Programs icon in the Windows 95 Control Panel.
Select MouseWare and press the Remove button.

Note: MouseWare Uninstall does not remove the Logitech drivers

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

Core Logic - Intel 430TX

Operating System

Windows 95

Version

3.3.0.2

Size Driver

585KB

File Name

piix4w95.exe

Observations

Intel 430TX PIIX4 Core Logic/Bus Master IDE Ultra DMA Driver Setup This document contains the following sections:

1. System Requirements
2. Contents of the Distribution Package
3. INF Files updated by the Software
4. Running the Software
5. Verifying INF Update by the Software
6. Troubleshooting
7. Release Notes

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

DVD-ROM Driver - Matsushita SR8183-B

Operating System

Windows 95-98

Size Driver

1MB

File Name

mpeg2c1.exe

Observations

Realmagic MPEG2 Driver Code 1 1. KapokCheckZV
for kapok8500 and 8500M notebook usage
to make sure they have zv port available.

set:
12\General, KapokCheckZV,1,00,00,00,01

2. KapokCheckCode
for kapok8500 to make sure it's not in tv mode.

set:
12\General, KapokCheckCode,1,00,00,00,01

3. UseS3MXMS
for kapok8500M to enable s3mx
Macrovision tv output

set:
12\General, UseS3MXMS,1,00,00,00,01

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

Video Drivers - S3 Virge/MX+ 86x280

Operating System

Windows 95-98

Version

4.10.01.3006-5.01.15

Size Driver

453KB

File Name

s3mxw9x.exe

Observations

If your Config.sys contains DEVICE=EMM386.EXE line please add the new
parameter x=C000-CFFF after EMM386.EXE.

The new line will be like this:

DEVICE=EMM386.EXE x=C000-CFFF
S3 ViRGE/MX Windows 9x Driver
Version * 4.10.01.3006-5.01.15 *
S3 SWITCH Display utility versiion * 1.01.32 *
S3D Tool Kit version (s3dtkw.dll) * 4.07.01 *
S3 VPM driver * 3.00.23 *

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

BIOS Updates

Operating System

Windows 98

Version

R1.12

Size Driver

203KB

File Name

70mr112.exe

Observations

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

Core Logic - Intel 430TX

Operating System

Windows NT 4

Size Driver

313KB

File Name

piix4nt4.exe

Observations

Intel 430TX PIIX4 Core Logic/Bus Master IDE Ultra DMA Driver Setup This document contains the following sections:

1. System Requirements
2. Installing the Software
3. Verifying Installation of the Software
4. Un-installing the Software
5. Troubleshooting
6. Identifying the Software Version Number
7. Contents of the Distribution Package
8. Storage Devices Supported by the Driver
9. Release Notes
a. General Release Information
b. Release-Specific Troubleshooting Information
c. Release Testing Information

Company

Chem Usa

Categories

Notebooks & Tablet PCs

Model

Chem Usa ChemBook 7000M

Description

Video Drivers - S3 Virge/MX+ 86x280

Operating System

Windows NT 4

Version

3.27.08

Size Driver

225KB

File Name

s3mxnt4.exe

Observations

Windows NT 4.0 Video Device Driver for S3 chipsets.

****Installing your new S3 Video Driver for Windows NT 4.0.****

1. Start system with Windows NT 4.0 installed.
2. IMPORTANT: When the "Please select the operating system to start..." message
is displayed, select "Windows NT Workstation Version 4.00 [VGA mode]".
3. From "Start", select the "Settings group", then click on the
"Control Panel" icon.
4. In the "Control Panel", double click on the "Display" icon.
5. In the "Settings" screen, click on the "Display Type..." button.
6. From the "Display Type" screen, and in the "Adapter Type" section, click
on the "Change..." button.
7. In the "Change Display" screen, click on the "Have Disk..." button.
8. Insert the new display driver diskette into the A:\ drive, then click on
the "OK" button.
9. From the list of displayed S3 devices, select your S3 device.
10. From "Third-party Drivers", click on the "Yes" button to proceed.
11. If a message appears stating the driver is already installed on the
system, and asks if you want to use the current or new drivers, be sure
to select the "New" button.
12. If prompted for the driver diskette a second time, click on the
"Continue" button.
13. When the message "The drivers were successfully installed" is displayed,
remove the display driver diskette, then click on the "OK" button.
14. Back at the "Display Type" window, click on the "Close" button.
15. Back at the "Display Properties" window, click on the "Close" button.
16. When you see the "System Settings Change" window, asking if you wish to
restart your computer, click on the "Yes" window to reboot now.

NOTE: If installing Windows NT 4.00 with the S3 device currently installed
in the system:

Proceed through the Windows NT installation as normal. The installation
program will prompt the user to choose a display mode. Choose the
"Cancel" button from the "Display Settings" screen to ignore this step
for now. The installation will now finish. Once Windows NT has started
for the first time, proceed to follow the steps outlined above to install
the driver for your S3 device.

Access to Official Website Chem Usa

Sorry, Chem Usa Official Website has disappeared!

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 21 files for Chem Usa ChemBook 7000M

Select Files